Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
64,332 Commits 71 Branches 509 Tags 756 MiB
Commit Graph

25 Commits

Author SHA1 Message Date
Peter Barker 956ac243e1 AP_HAL_ChibiOS: adjust hwdef files for define renames 2024-07-11 09:34:00 +10:00
Peter Barker 10627d296d hwdef: remove HAL_GPIO lines which are simply the default values 
... or the _OFF entry, which is simply !HAL_GPIO_MED_ON
 2024-04-03 11:00:24 +11:00
Peter Barker 338a4d6b38 hwdef: remove HAL_BOARD_LOG_DIRECTORY and HAL_BOARD_TERRAIN_DIRECTORY defaults 
these are now defaulted in chibios_hwdef.py
 2023-07-19 17:25:18 +09:00
bugobliterator 8651d99de6 HAL_ChibiOS: move to using parameter STORAGE_FLASH_PAGE instead of define 2021-10-30 19:24:57 +11:00
Andrew Tridgell 68146d541c HAL_ChibiOS: removed boilerplate lines from bootloaders 2021-10-26 15:56:53 +11:00
Andrew Tridgell 47da7f5c9b HAL_ChibiOS: change RCIN FLOAT to PULLDOWN 
this lowers the chance of noise on a RCIN pin causing incorrect
protocol detection
 2021-10-12 11:52:36 +11:00
Iampete1 0143518954 AP_Hal_ChibiOS: mRoControlZeroF7: add OUTPUT to GPIO 2021-10-05 15:46:02 +11:00
Peter Barker 70aef84997 AP_HAL_ChibiOS: remove definitions of BOARD_PWM_COUNT_DEFAULT 
No longer used
 2021-08-20 10:51:19 +10:00
Andrew Tridgell bbd32844d1 HAL_ChibiOS: switch more boards to 32k FRAM 
this enables the parameter backup/restore on those boards, as well as
more waypoints

This is in response to a report that CUAVv5 boards can suffer from the
parameter reset issue
 2021-03-21 11:59:12 +11:00
Andrew Tridgell 814393c9c2 HAL_ChibiOS: switch from DPS280 to DPS310 in boards that use the DPS310 2021-02-09 11:37:07 +11:00
Phillip Kocmoud a379bb8fc5 hwdef: mRo Control Zero F7 update and improve uniformity 2020-11-28 20:28:22 +11:00
Andrew Tridgell 571fbf8f71 HAL_ChibiOS: update power VALID pins 2020-06-04 09:51:27 +10:00
Andrew Tridgell 32cdfddf12 HAL_ChibiOS: convert all hwdef from UART_ORDER to SERIAL_ORDER 
much easier to understand
 2020-04-28 10:32:23 +10:00
Andrew Tridgell a9df9fe0c0 HAL_ChibiOS: removed clock tree settings in most hwdef.dat 
these are better set automatically in the headers. This simplifies the
task of doing a new port
 2020-04-28 10:32:23 +10:00
Andrew Tridgell e8b2b52bae HAL_ChibiOS: removed STM32_VDD from hwdef.dat 
use default
 2020-04-28 10:32:23 +10:00
Andrew Tridgell d35fff5186 HAL_ChibiOS: set CS pins high while in bootloader 
this appears to be the root cause of the parameter resets on
CubeOrange. We need to ensure the CS pin is not floating or random
noise on the SPI bus for FRAM can cause the FRAM to become corrupt
 2020-03-11 09:53:06 +11:00
Andrew Tridgell 793b867706 HAL_ChibiOS: switched to new USB VID for dual-CDC boards 2020-01-06 09:55:26 +11:00
Andrew Tridgell d422825715 HAL_ChibiOS: removed per-board AP_FEATURE_RTSCTS and AP_FEATURE_SBUS_OUT 
not needed any more
 2019-12-18 17:18:44 +11:00
Phillip Kocmoud 73c56220ff HAL_ChibiOS: update mRoControlZeroF7 I2C mask 2019-11-27 16:08:19 +11:00
Andrew Tridgell 97dc76732c HAL_ChibiOS: drop mRoControlZeroF7 DPS310 clock to 5MHz 2019-10-15 10:22:15 +11:00
Andrew Tridgell e820219202 HAL_ChibiOS: changed optimisation of higher end boards to -O2 
-O3 does not seem to be a win, and takes up a lot more flash
 2019-09-28 08:57:26 +10:00
Andrew Tridgell 98f578394f HAL_ChibiOS: default OTG2 protocol to mavlink2 on most boards 
For boards that haven't yet had a driver update in MissionPlanner to
cope with the 2nd OTG interface this change makes both interfaces work
as MAVLink

This also fixes an issue with connecting under a windows VM within
vmware
 2019-07-26 21:58:57 +10:00
Andrew Tridgell 1919268801 HAL_ChibiOS: added OTG2 on all F7 and H7 boards with CAN 
allows for SLCAN on 2nd port
 2019-07-12 17:01:21 +10:00
Andrew Tridgell ceb9c3b83e HAL_ChibiOS: convert mRoControlZeroF7 to new sensor config 2019-05-30 15:39:57 +10:00
Phillip Kocmoud 9709401595 HAL_ChibiOS: added hwdef for mRoControlZeroF7 2019-05-10 15:05:42 +10:00