153da15579
ArduCopterNG - fixes to sonar/barometer altitude hold. Fixes bugs including:
...
1. bad values from sonar were allowed to feed into altitude PID control leading to little hops
2. barometer altitude hold was disabled if sonar wasn't present
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1420 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-01-04 14:38:17 +00:00
d119da451e
ArduCopterNG -
...
#1 - changed GPS hold to ver2 which builds up PID's I term on the long + lat instead of roll+pitch.
#2 - added ability to use Sonar and Barometer at the same time for altitude control (it uses Sonar if available, but if not uses Barometer).
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1405 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-01-03 04:37:23 +00:00
e93daf2546
ArduCopterNG - added altitude hold using Sonar/Rangefinder
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1265 f9c3cf11-9bcb-44bc-f272-b75c42450872
2010-12-26 04:30:55 +00:00
b5a835b6ac
ArducopterNG - turn off rangeFinders by default
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1230 f9c3cf11-9bcb-44bc-f272-b75c42450872
2010-12-22 13:44:56 +00:00
0b7fd432b5
Addition of position hold version 2 (builds up I term on log + lat instead of roll + pitch)
...
Addition of obstacle avoidance including new option in CLI menu to set PID values
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1228 f9c3cf11-9bcb-44bc-f272-b75c42450872
2010-12-22 13:38:54 +00:00
48d1c18dc5
CLI updates
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1139 f9c3cf11-9bcb-44bc-f272-b75c42450872
2010-12-15 13:51:53 +00:00
ddd2b585f8
ArduCopterNG - changed to use AP_Compass (instead of APM_Compass)
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1114 f9c3cf11-9bcb-44bc-f272-b75c42450872
2010-12-12 14:05:31 +00:00
339845770c
Corrected default Magnetometer orientation
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1106 f9c3cf11-9bcb-44bc-f272-b75c42450872
2010-12-10 19:06:14 +00:00
b82ba72ab2
ESC/Motor tester on CLI
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1100 f9c3cf11-9bcb-44bc-f272-b75c42450872
2010-12-10 05:22:52 +00:00
d8642aeaab
new baro/throttle algorithms
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1099 f9c3cf11-9bcb-44bc-f272-b75c42450872
2010-12-10 04:07:08 +00:00
9b3b5320fc
removing DONT_USE flags and minor changes
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1056 f9c3cf11-9bcb-44bc-f272-b75c42450872
2010-12-06 14:56:55 +00:00
14f500a688
introducing flight frames and mixer tables, work
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@977 f9c3cf11-9bcb-44bc-f272-b75c42450872
2010-11-28 17:20:16 +00:00
590a1cd942
CLI stepping leds
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@974 f9c3cf11-9bcb-44bc-f272-b75c42450872
2010-11-28 11:16:38 +00:00
29be59b76d
Changed magnetometer to it's defaults
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@973 f9c3cf11-9bcb-44bc-f272-b75c42450872
2010-11-28 10:58:38 +00:00
4a4fc212cf
CLI info leds, mode fixes
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@972 f9c3cf11-9bcb-44bc-f272-b75c42450872
2010-11-28 10:56:27 +00:00
cfae8490d5
Switch ArducopterNG to use AP_ADC library.
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@950 f9c3cf11-9bcb-44bc-f272-b75c42450872
2010-11-27 04:56:31 +00:00
715cd4d3b0
ArduCopterNG: added TraditionalHeli support, changed G_dt to work in microseconds (Issue #37 ),
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@909 f9c3cf11-9bcb-44bc-f272-b75c42450872
2010-11-24 01:30:41 +00:00
ef6519e406
ArduCopterNG - small cosmetic change & small change to how Wire.begin is called (now only called once). http://www.arduino.cc/en/Reference/WireBegin
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@885 f9c3cf11-9bcb-44bc-f272-b75c42450872
2010-11-22 13:53:13 +00:00
e7eda28984
gps hold and baro updates
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@877 f9c3cf11-9bcb-44bc-f272-b75c42450872
2010-11-21 12:56:25 +00:00
f622222f4a
Updated arducopter to instantiate sensor classes to accomodate new HIL classes.
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@858 f9c3cf11-9bcb-44bc-f272-b75c42450872
2010-11-19 06:11:57 +00:00
9e6fcded41
Geographic_correction_factor is now internally calculated (no need for external parameter)
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@822 f9c3cf11-9bcb-44bc-f272-b75c42450872
2010-11-10 21:38:56 +00:00
05ea4dce7d
Yellow LED on when GPS position hold mode
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@815 f9c3cf11-9bcb-44bc-f272-b75c42450872
2010-11-09 22:03:09 +00:00
0ce4e75c79
Some corrections on attitude file. Magnetometer tests
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@814 f9c3cf11-9bcb-44bc-f272-b75c42450872
2010-11-09 21:38:54 +00:00
eb5f4d7d32
prepared support for Mode 1 & Mode 2 radios
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@768 f9c3cf11-9bcb-44bc-f272-b75c42450872
2010-11-03 16:52:04 +00:00
6f70fddea4
work on progress, updated camera functions, rearranging module configs
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@767 f9c3cf11-9bcb-44bc-f272-b75c42450872
2010-11-03 12:39:11 +00:00
288c61fcce
preparing for camera stabilization features
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@756 f9c3cf11-9bcb-44bc-f272-b75c42450872
2010-10-30 14:38:52 +00:00
4a07a3c09d
preparing for automatic calibration via CLI
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@752 f9c3cf11-9bcb-44bc-f272-b75c42450872
2010-10-30 08:30:46 +00:00
b853247c08
preparing for camera mounts
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@744 f9c3cf11-9bcb-44bc-f272-b75c42450872
2010-10-29 05:47:54 +00:00
74674b638b
flight orientation selection by DIP1 switch
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@693 f9c3cf11-9bcb-44bc-f272-b75c42450872
2010-10-19 16:07:51 +00:00
f5cd4e45f9
CLI and magneto initializations
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@692 f9c3cf11-9bcb-44bc-f272-b75c42450872
2010-10-19 15:22:58 +00:00
ede3a46cf1
cleaning up and preparing for CLI
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@687 f9c3cf11-9bcb-44bc-f272-b75c42450872
2010-10-18 18:24:46 +00:00
35b754bbae
Xbee/Ser0 telemetry ports are working again
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@682 f9c3cf11-9bcb-44bc-f272-b75c42450872
2010-10-17 17:34:17 +00:00
455e315a1a
updated serial port defs
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@681 f9c3cf11-9bcb-44bc-f272-b75c42450872
2010-10-17 16:18:14 +00:00
778c68d5ef
Some bug corrections on startup
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@660 f9c3cf11-9bcb-44bc-f272-b75c42450872
2010-10-13 16:48:09 +00:00
6baf85d880
CalibrateSensors update. Some cleanups...
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@655 f9c3cf11-9bcb-44bc-f272-b75c42450872
2010-10-11 21:54:42 +00:00
7667214987
Corrected bug on yaw sensor sign
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@654 f9c3cf11-9bcb-44bc-f272-b75c42450872
2010-10-11 20:43:25 +00:00
af74cb32c5
Main loop organization. NOT WORKING YET
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@653 f9c3cf11-9bcb-44bc-f272-b75c42450872
2010-10-11 14:12:44 +00:00
018e8efc00
System.pde update
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@649 f9c3cf11-9bcb-44bc-f272-b75c42450872
2010-10-11 12:20:30 +00:00
0540bbbe28
Start ArducopterNG update
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@648 f9c3cf11-9bcb-44bc-f272-b75c42450872
2010-10-11 12:14:04 +00:00
9d8ea2563f
refactoring of code beginning
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@533 f9c3cf11-9bcb-44bc-f272-b75c42450872
2010-09-20 09:38:11 +00:00
813b67cb5e
starting migration of functions
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@507 f9c3cf11-9bcb-44bc-f272-b75c42450872
2010-09-13 09:07:31 +00:00
eaf6488fb3
renamed Arducopter.pde to ArducoptreNG.pde
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@332 f9c3cf11-9bcb-44bc-f272-b75c42450872
2010-08-28 17:30:20 +00:00
rmackay9@yahoo.com
jphelirc
jjulio1234
james.goppert
CaranchoEngineering