Michael Oborne
c62050dc1b
AP_GPS_SBF: fix accuracy reported by driver
2016-11-12 16:42:35 +09:00
Andrew Tridgell
5f3c14ea01
AP_RangeFinder: fixed tabs -> spaces
2016-11-12 14:18:15 +11:00
Andrew Tridgell
41018feb3a
HAL_PX4: split I2C transfers
...
this avoids SCL low with a stop condition, which doesn't work with
some devices
2016-11-12 14:18:14 +11:00
Andrew Tridgell
0c7dd99d7e
AP_RangeFinder: support LidarLite V2 using in-tree driver
...
needs to run in continuous mode
2016-11-12 14:18:14 +11:00
Andrew Tridgell
fd7b313e34
AP_RangeFinder: removed pwm_input_main
...
thanks to Francisco
2016-11-11 15:49:53 +11:00
Andrew Tridgell
a69ff34c80
AP_RangeFinder: try bus 0 and 1 for PulsedLightI2C rangefinder
2016-11-11 15:49:53 +11:00
Andrew Tridgell
516141edf3
AP_RangeFinder: start PX4 rangefinder drivers on demand
2016-11-11 15:49:53 +11:00
Andrew Tridgell
0fb959a309
AP_RPM: make pwm_input driver start on demand
2016-11-11 15:49:53 +11:00
Andrew Tridgell
08f770125e
AP_BoardConfig: moved optional sensor startup out of AP_BoardConfig
2016-11-11 15:49:53 +11:00
Andrew Tridgell
8d19808152
AP_InertialSensor: fixed missing checked register goto
...
thanks to Francisco for spotting
2016-11-11 08:08:56 +11:00
Andrew Tridgell
49856c37f2
AP_InertialSensor: reduce checked register count
...
thanks to Francisco for spotting this
2016-11-11 08:08:56 +11:00
Andrew Tridgell
4be8f05ad4
AP_InertialSensor: added register checking for LSM9DS0
2016-11-11 08:08:56 +11:00
Andrew Tridgell
77a83c091a
AP_InertialSensor: added register checking for MPU6000/ICM20608
2016-11-11 08:08:56 +11:00
Andrew Tridgell
95a849f472
AP_InertialSensor: added register checking for MPU9250
2016-11-11 08:08:56 +11:00
Andrew Tridgell
3289e90134
AP_InertialSensor: added error count increments in drivers
2016-11-11 08:08:55 +11:00
Andrew Tridgell
bc614de4b3
AP_HAL: added checked registers interface
...
allow drivers to easily monitor and correct critical registers
2016-11-11 08:08:55 +11:00
Andrew Tridgell
4ebf3309f7
AP_InertialSensor: auto-handle invensense sensor changes
...
some boards swap out MPU6000 for MPU9250 or ICM20608
2016-11-11 08:08:55 +11:00
Andrew Tridgell
8e61b15384
HAL_PX4: added ICM20608_EXT SPI device
2016-11-11 08:08:55 +11:00
Andrew Tridgell
e4454c5056
AP_Compass: setup for new PX4 board IDs
2016-11-11 08:08:55 +11:00
Andrew Tridgell
41b132e576
AP_Baro: setup for new board PX4 IDs
2016-11-11 08:08:55 +11:00
Andrew Tridgell
4f50d67790
AP_BoardConfig: added board type auto-detection
...
using SPI probing
2016-11-11 08:08:55 +11:00
Andrew Tridgell
c565c9df35
AP_HAL: added ICM20608 external SPI name
2016-11-11 08:08:55 +11:00
Andrew Tridgell
af0ec41652
AP_InertialSensor: fixed accel clip detection with fast sampling
...
we need to check on every sample at the full rate
2016-11-10 13:39:17 +11:00
Andrew Tridgell
0eac781559
AP_Compass: don't run the AK8963 on the external MPU9250
...
this saves us one mag slot for another external mag, and leaves the
primary MPU9250 undisturbed by the mag traffic on the bus
2016-11-10 13:05:22 +11:00
Andrew Tridgell
70c27a85de
AP_InertialSensor: on PH2 run the first MPU9250 at 8kHz
2016-11-10 13:04:15 +11:00
Andrew Tridgell
73122adb78
AP_BoardConfig: removed unused startup functions for Pixracer
2016-11-10 12:55:22 +11:00
Andrew Tridgell
3d5c57c5dc
AP_Compass: fixed orientation of PH2 in-tree compass drivers
2016-11-10 11:44:52 +11:00
Andrew Tridgell
4ba00720aa
AP_Compass: make init() private
...
not called from frontend
2016-11-10 11:44:52 +11:00
Andrew Tridgell
1ea4c6938c
AP_InertialSensor: allow auxiliary bus with fast sampling
2016-11-10 11:44:52 +11:00
Andrew Tridgell
8da42b7a8b
AP_InertialSensor: fixed temperature for fast sampling case
2016-11-10 11:44:52 +11:00
Andrew Tridgell
cb70bae167
AP_InertialSensor: use in-tree drivers for PH2SLIM
2016-11-10 11:44:52 +11:00
Andrew Tridgell
c68a6451cb
AP_Compass: use in-tree drivers for PH2SLIM
2016-11-10 11:44:52 +11:00
Andrew Tridgell
d716bbedee
AP_Baro: use in-tree drivers for PH2SLIM
2016-11-10 11:44:52 +11:00
Andrew Tridgell
e7a9de9b41
AP_BoardConfig: use in-tree drivers for PH2SLIM
2016-11-10 11:44:52 +11:00
Andrew Tridgell
fea7040aff
AP_Baro: don't panic when we can't find MS5611
...
this makes booting a PH2 without its sensor hat on much easier
2016-11-10 11:44:51 +11:00
Andrew Tridgell
e27a76e460
AP_InertialSensor: fixed auxiliary bus with FIFO enabled
...
make sure fifo reset doesn't check I2C master enable
2016-11-10 11:44:51 +11:00
Andrew Tridgell
46785e8ecf
AP_InertialSensor: improved method for FIFO integrity checking
...
check temperature every 255 samples against FIFO data
2016-11-10 11:44:51 +11:00
Andrew Tridgell
8a3f6a8902
AP_InertialSensor: use FIFO and implement fast sampling for MPU9250
2016-11-10 11:44:51 +11:00
Andrew Tridgell
f94e4b4375
Filter: allow 1P LowPassFilter to work without alpha recalc per sample
...
this makes the 1P filter optionally syntax compatible with the 2P
filter and much more CPU efficient.
2016-11-10 11:43:29 +11:00
murata
f9add59b58
Global: Aggregate the same definitions.
...
Global: Aggregate the same definitions.
2016-11-09 11:46:55 -03:00
Lucas De Marchi
c1647b13eb
AP_HAL_Linux: fix leaking strings
2016-11-09 11:44:05 -03:00
Andrew Tridgell
e25a391a8f
AP_InertialSensor: fixed typo
2016-11-09 17:08:15 +11:00
Andrew Tridgell
d2f6a514b9
AP_InertialSensor: catch FIFO alignment errors using temperature reading
...
Two cases of what seems to be FIFO alignment errors have been seen on
a Pixracer-beta board with a ICM-20608. At a cost of 2 extra bytes per
transfer we can catch these by looking for sudden temperature changes
caused by bad data in the temperature registers.
2016-11-09 17:08:15 +11:00
Andrew Tridgell
4602b4d679
AP_Compass: improve init and calibration of hmc5843
2016-11-09 17:08:15 +11:00
Andrew Tridgell
d248b33104
AP_InertialSensor: simplify config of MPU6000
...
use zero sample rate divider on both MPU6000 and ICM20608
2016-11-09 17:08:14 +11:00
Andrew Tridgell
7137d5c6f2
AP_InertialSensor: switch pixracer to always use in-tree drivers
2016-11-09 17:08:14 +11:00
Andrew Tridgell
3d48a72f59
AP_C0mpass: switch pixracer to always use in-tree drivers
2016-11-09 17:08:14 +11:00
Andrew Tridgell
b8c789cf35
AP_Baro: switch pixracer to always use in-tree drivers
2016-11-09 17:08:14 +11:00
Andrew Tridgell
b0b93f8928
AP_BoardConfig: switch pixracer to always use in-tree drivers
2016-11-09 17:08:14 +11:00
Andrew Tridgell
84c3e29891
AP_InertialSensor: use AP_HAL rotations for MPU6000
2016-11-09 17:08:14 +11:00