TsuyoshiKawamura
220e58ca6d
Plane: correct spelling in ReleaseNotes.txt
2023-02-01 14:16:28 +00:00
Iampete1
2d51b2c9b8
Plane: remove direct roll/pitch stick mixing support
2023-02-01 18:45:10 +11:00
Iampete1
a63a32d6f3
Plane: QRTL: combine threshold radius for QRTL and RTL
2023-01-31 10:57:21 +11:00
Henry Wurzburg
10b69e1c1f
Plane:expand yaw autotune to other modes
2023-01-31 10:02:16 +11:00
Andrew Tridgell
6623f1156c
Plane: transition pitch limit should not apply to FBWA
...
pilot should be able to override pitch, very important on motor
failure to control glide
2023-01-30 09:19:14 +11:00
Iampete1
76a10d9b26
Plane: relative_ground_altitude allow passing bool for terrain use
2023-01-25 19:34:53 +11:00
Iampete1
928a923f43
Plane: Quadaplane: QRTL use stopping point for climb submode altitude threshold
2023-01-25 19:34:53 +11:00
Iampete1
bf9d49b72d
Plane: Quadaplane: add param for min QRTL altitude when close to home
2023-01-25 19:34:53 +11:00
Iampete1
4a2a792624
Plane: QRTL: use cone for QRTL climb close to home
2023-01-25 19:34:53 +11:00
Iampete1
20934491e5
Plane: Quadplane: limit manual throttle tilt angle to Q_TILT_MAX
2023-01-24 10:28:36 +11:00
Iampete1
02ca9c855a
Plane: tailsitter: update I reset and limit handling
2023-01-24 10:27:02 +11:00
Iampete1
342d6f21be
ArduPlane: use check_enabled helper
2023-01-23 11:00:13 +09:00
Andrew Tridgell
43b4be6ffb
Plane: release notes for 4.3.3
2023-01-20 12:17:19 +11:00
Andrew Tridgell
9b2c7a90e7
Plane: fixed loiter.direction for VTOL approach
...
ensure the direction is setup correctly for both CW and CCW
2023-01-15 21:32:27 +11:00
Andrew Tridgell
77e63da4b3
Plane: added TKOFF_THR_MAX_T
...
time for max throttle on takeoff if no airspeed sensor
2023-01-15 12:17:27 +11:00
Iampete1
4e00a460fb
ArduPlane: use shared param info defines
2023-01-11 18:41:34 +11:00
Andrew Tridgell
5fba595001
Plane: update release notes for 4.3.3beta1
2023-01-10 15:14:26 +11:00
Peter Barker
bef10c21bf
ArduPlane: make check_var_info void
...
Given all the callers die anyway, make it void
2023-01-10 10:48:15 +11:00
Tom Pittenger
9440e3c544
Plane: bugfix - RTL_AUTOLAND no longer overrides loiter direction
2023-01-10 08:58:15 +11:00
Peter Barker
5fd555a07a
ArduPlane: implement parameter CopyFieldsFrom and use it
2023-01-03 11:08:43 +11:00
Henry Wurzburg
636a18f98f
Plane: Update Q_OPTIONS metadata to new format
2023-01-03 10:29:44 +11:00
Iampete1
3a4e07a73c
Plane: Events: consolodate failsafe evnt to single print
2023-01-03 10:26:46 +11:00
Peter Barker
9edac79db8
ArduPlane: use relay singleton in Parachute
2023-01-03 10:19:54 +11:00
olliw42
a89d5e1c83
Plane: QArco name4 longer than 4
2023-01-01 13:44:10 -08:00
Iampete1
a99748a13d
Plane: Quadaplane: use land_at_climb_rate_cm only when landing
2022-12-30 20:25:58 +09:00
Leonard Hall
87c684b5ee
Plane: Vtol: use land_at_climb_rate_cm for vertical rate control
2022-12-30 20:25:58 +09:00
Henry Wurzburg
1b39f00517
ArduPlane:test new flight options formats
2022-12-29 16:14:54 +11:00
Peter Barker
f8b8f652db
Plane: break FLIGHT_OPTIONS metadata onto separate lines
2022-12-28 13:21:18 +11:00
Jeremy
0db6146f60
Plane: Added Y4 config to Quadplane
2022-12-27 15:19:28 +11:00
Iampete1
da0927b076
Plane: Quadaplane: remove RTL navigate incorrect comment and unnedded check
2022-12-27 11:26:16 +11:00
Iampete1
4a21af22cb
Plane: move mode update_target_altitude to correct files
2022-12-27 10:30:14 +11:00
Andrew Tridgell
97e1c14114
Revert "Plane: default takeoff pitch to 15 deg for PPDS"
...
This reverts commit 210dac7356
.
this was committed by mistake
2022-12-24 13:26:31 +11:00
Andrew Tridgell
8686589cc0
Plane: release notes for 4.3.2
2022-12-23 10:18:29 +11:00
Iampete1
f28d7a3574
Plane: move adjust_altitude_target functianlity to per mode functions
2022-12-20 10:37:06 +11:00
Iampete1
ab43dadb57
Plane: altitude: add `plane.` prefix to Plane::adjust_altitude_target to minimise diff
2022-12-20 10:37:06 +11:00
Iampete1
e5e96eb4d8
Plane: tiltrotor: add throttle scaleing for vectored yaw
2022-12-20 09:48:56 +11:00
Peter Barker
5483398c7d
Plane: correct compilation when QAUTOTUNE compiled out
2022-12-18 09:19:12 +11:00
Peter Barker
0a5d76d81d
ArduPlane: code-generate chan-fetching methods
...
A recent PR had to change every single one of these methods, which was kind of unfortunate.
So generate the methods using a #define so the duplication happens at preprocessor-time.
2022-12-15 08:31:54 +11:00
Iampete1
da503a5e44
Plane: GCS_Mavlink: use base class DO_SET_HOME
2022-12-14 19:25:44 +11:00
Peter Barker
0cf56ea320
ArduPlane: make and use AP_LANDINGGEAR_ENABLED
2022-12-14 18:30:23 +11:00
Leonard Hall
16ccdeb058
Plane: Support changing update period in Motors
2022-12-13 17:10:06 +11:00
Leonard Hall
0bc5e68aed
Plane: Support changing update period
2022-12-13 17:10:06 +11:00
Henry Wurzburg
06730ab1bc
ArduPlane: add warning for large offset cal
2022-12-13 17:08:42 +11:00
Peter Barker
92a658c298
Plane: call adjust_altitude_target after setting waypoint
...
if we're too close to the next waypoint then we can end up using stale altitude target data when deciding whether a waypoint is complete or not.
2022-12-13 11:41:23 +11:00
Iampete1
b957ef1289
Plane: QRTL if RTL is expecting to VTOL land and close home with VTOL motors active
2022-12-13 10:32:32 +11:00
Andrew Tridgell
8dff38a4a1
Plane: updated release notes for 4.3.2beta2
2022-12-12 08:02:06 +11:00
Iampete1
152eb47020
Plane: Quadaplane: add aux function for QStabilize mode
2022-12-06 11:22:35 +11:00
Andrew Tridgell
289f76ac9c
Plane: added FAST_TASK() for key scheduler tasks
...
this will be needed with #22298 as that now relies on integrating
position based on loop times
2022-12-06 11:17:04 +11:00
Andrew Tridgell
6db842e967
Plane: ensure smoothed airspeed is > 0
...
prevent possible divide by zero
2022-12-06 09:02:44 +11:00
Andrew Tridgell
49d0a4906a
Plane: added turn corrdination to autotune yaw rate tuning
...
this makes it much easier to do a yaw rate autotune, and also means
you don't need to use the rudder stick at all, as the yaw controller
is already exercised nicely with roll movements, so overall the tune
is faster and more accurate as less cross-axis coupling
2022-12-06 09:02:44 +11:00