Michael du Breuil
|
3bad3b2e68
|
Rover: Check MANUAL_CONTROL target
|
2018-04-10 16:54:34 +01:00 |
Randy Mackay
|
da619e8aa6
|
Rover: 3.2.3 release notes
|
2018-04-09 09:04:30 +09:00 |
Andrew Tridgell
|
4f6240ee8a
|
Rover: handle oneshot125 separately
|
2018-04-07 09:10:29 +10:00 |
Andrew Tridgell
|
4350cee7cf
|
Rover: added mask to set_output_mode()
|
2018-04-07 09:10:29 +10:00 |
Randy Mackay
|
f7a168478d
|
Rover: integrate attitude control's get_steering_out_heading
|
2018-04-05 12:14:59 +09:00 |
Randy Mackay
|
e8070a5cb3
|
Rover: pass waypoint radius to L1 as min dist along track
|
2018-04-05 12:14:59 +09:00 |
Randy Mackay
|
41bd79a387
|
Rover: pivot-turn uses heading controller
|
2018-04-05 12:14:59 +09:00 |
Peter Barker
|
e74d07ff15
|
Rover: remove wrapper for Log_Write_Beacon
|
2018-04-04 16:20:33 +09:00 |
Francisco Ferreira
|
b2af1f1e05
|
Rover: fix method shadowing
|
2018-04-03 16:29:33 +01:00 |
Peter Barker
|
a45e3cba15
|
Rover: factor vehicle's mavlink send_heartbeat
|
2018-04-03 13:05:19 +01:00 |
Randy Mackay
|
c05d239069
|
Rover: remove throttle scaling dependency on throttle range
|
2018-04-03 10:42:39 +09:00 |
Randy Mackay
|
fa20fd695f
|
Rover: use throttle_min param as output deadzone
|
2018-04-03 10:42:39 +09:00 |
Randy Mackay
|
b9e32d1f44
|
Rover: reduce expected times in scheduler table
|
2018-04-03 08:40:31 +09:00 |
Peter Barker
|
c10f404b12
|
Rover: tidy handling of barometer calibrations
|
2018-04-02 23:25:05 +01:00 |
Peter Barker
|
b407a4eed8
|
Rover: move common calibration functions up
|
2018-04-02 23:25:05 +01:00 |
Peter Barker
|
762b31b147
|
Rover: create a preflight calibration function
Some functionality has moved up.
|
2018-04-02 23:25:05 +01:00 |
Peter Barker
|
db7ce9aba2
|
Rover: use ahrs singleton for SmartRTL
|
2018-04-02 17:16:02 +01:00 |
Randy Mackay
|
39bade1f4a
|
Rover: 3.2.3-rc2 release notes
|
2018-04-02 12:01:45 +09:00 |
Randy Mackay
|
c923158cc9
|
Rover: 3.2.3-rc1 release notes
|
2018-04-02 11:11:13 +09:00 |
nicknunno
|
8888adbfd4
|
Rover: TURN_MAX_G param desc update for range and increment
|
2018-04-02 09:13:25 +09:00 |
Michael du Breuil
|
b761a57da3
|
Rover: Support new battery interface
|
2018-03-27 22:12:21 +01:00 |
Peter Barker
|
57ed822db0
|
Rover: allow DataFlash to handle log sending
|
2018-03-26 09:22:47 +09:00 |
Peter Barker
|
3c58eca0ab
|
Rover: move handling of visual odometry messages up
|
2018-03-23 09:28:07 +09:00 |
Randy Mackay
|
96ae9cef14
|
Rover: send correct mav-type for boats
|
2018-03-22 09:11:52 +09:00 |
Randy Mackay
|
489551c9a4
|
Rover: 3.2.2 release notes
|
2018-03-19 19:11:53 +09:00 |
Peter Barker
|
bb7bed0614
|
Rover: move handling of get_home_position up
|
2018-03-19 10:32:37 +09:00 |
Peter Barker
|
7fd859da65
|
Plane: move home state into AP_AHRS
|
2018-03-19 10:32:37 +09:00 |
Peter Barker
|
9d0da4a71f
|
Rover: move home state into AP_AHRS
|
2018-03-19 10:32:37 +09:00 |
Peter Barker
|
ceb64fb7d9
|
Rover: use ins singleton
|
2018-03-16 00:37:35 -07:00 |
Randy Mackay
|
30ba463f42
|
Rover: minor comment fix to acro
non-functional change
|
2018-03-15 09:58:24 +09:00 |
Randy Mackay
|
00353c7a06
|
Rover: avoid divide by zero in desired speed at waypoint calcs
|
2018-03-14 12:40:04 +09:00 |
Randy Mackay
|
86c39c0314
|
Rover: run update_mission at 50hz
|
2018-03-14 12:40:04 +09:00 |
Randy Mackay
|
343d119726
|
Rover: wp nav uses stopping point or prev wp for origin
|
2018-03-14 12:40:04 +09:00 |
Randy Mackay
|
073d9519ca
|
Rover: version to ArduRover V3.3.0-dev
|
2018-03-12 16:11:37 +09:00 |
Randy Mackay
|
e3f70119fe
|
Rover: fix two-paddle input decoding
steering output was twice what it should be. full steering (i.e. 4500 or -4500) should occur when one paddle is up and the other is completely down
|
2018-03-12 14:39:13 +09:00 |
Peter Barker
|
81ba037582
|
Rover: use baro singleton
|
2018-03-08 21:20:05 -08:00 |
Peter Barker
|
1f772c05f4
|
Rover: delete correct assignment operator
|
2018-03-08 21:20:05 -08:00 |
Randy Mackay
|
dcfe104163
|
Rover: reduce CRUISE_SPEED default to 2m/s
based on user logs most rovers max speed is less than 4m/s so this default is closer to the average
|
2018-03-09 13:19:21 +09:00 |
Randy Mackay
|
1baa6eb049
|
Rover: 3.2.2-rc1 release notes
|
2018-03-08 16:24:03 +09:00 |
Randy Mackay
|
4e8399ca3f
|
Rover: acro and steering steer even with target speed of zero
|
2018-03-08 14:45:43 +09:00 |
Peter Barker
|
78ecf55fec
|
Rover: use AP::ahrs() for GCS_MAVLink
|
2018-03-07 12:34:39 +00:00 |
night-ghost
|
bab54ea647
|
Rover: allow AP_Stats to be optional
|
2018-03-02 07:23:35 +11:00 |
Andrew Tridgell
|
f190ca0867
|
Rover: use scheduler.get_last_loop_time_s()
|
2018-02-13 17:15:05 +11:00 |
Peter Barker
|
90d26a5100
|
Rover: eliminate perf_update scheduler table shim
|
2018-02-13 17:15:05 +11:00 |
Andrew Tridgell
|
80c45a7431
|
Rover: use filtered loop time
|
2018-02-13 17:15:05 +11:00 |
Peter Barker
|
7b6bc4adf1
|
Rover: pass log-performance-bit at init time rather than update time
|
2018-02-13 17:15:05 +11:00 |
Peter Barker
|
55c27dfc56
|
Rover: move logging of PM messages to AP_Scheduler
|
2018-02-13 17:15:05 +11:00 |
Peter Barker
|
b2e2b91d7e
|
Rover: move PERF: statustext sending into AP_Scheduler
|
2018-02-13 17:15:05 +11:00 |
Peter Barker
|
d9bb546048
|
Rover: use AP_Scheduler's loop() function
|
2018-02-13 17:15:05 +11:00 |
Peter Barker
|
211e7416a9
|
Rover: use scheduler ticks in place of mainloop_count
|
2018-02-13 17:15:05 +11:00 |