Andrew Tridgell
c0697d0a2d
Plane: mark 2.75beta1
2013-07-22 12:50:30 +10:00
Andrew Tridgell
6e288551ab
Plane: fixed reversion to pre-failsafe mode
...
if AUTO was entered using GCS, we need to switch back to the old mode,
not control channel
2013-07-22 12:50:02 +10:00
Andrew Tridgell
c8a83e17d0
Plane: remove old AIR_START code
...
this was never used or tested
2013-07-22 12:50:01 +10:00
Andrew Tridgell
7673ca0bac
Plane: updates for new EAS2TAS scaling
2013-07-22 12:50:01 +10:00
Andrew Tridgell
9bbe6c1967
Plane: update to new license boilerplate for GPLv3
...
we had LGPLv2 in some places, despite the fw being GPLv3
2013-07-22 12:50:01 +10:00
Andrew Tridgell
882aa68c16
Plane: use new airspeed calibration code
...
Pair-Programmed-With: Paul Riseborough <p_riseborough@live.com.au>
2013-07-22 12:50:01 +10:00
Andrew Tridgell
9b70675b12
Plane: check the control switch a bit more often
...
faster response to mode changes
2013-07-22 12:50:00 +10:00
Andrew Tridgell
51b9cf3e76
Plane: move failsafe variables into a structure
...
this makes the logic a bit easier to follow
2013-07-22 12:50:00 +10:00
Andrew Tridgell
608345415b
Plane: pass aircraft parameters to attitude controllers
...
also cope with rename of airspeed min/max variables
Pair-Programmed-With: Paul Riseborough <p_riseborough@live.com.au>
2013-07-18 14:53:37 +10:00
Andrew Tridgell
a4f49a28fb
Plane: prepare for 2.74b release
2013-07-16 09:45:32 +10:00
Andrew Tridgell
e27dd14bcc
Plane: fixed FBWB aileron control
2013-07-16 09:44:23 +10:00
Andrew Tridgell
e8355905dd
Plane: prepare for 2.74 release
2013-07-15 11:19:38 +10:00
Andrew Tridgell
dbd47b2a30
Plane: make TECS the default speed/height controller
2013-07-15 11:12:24 +10:00
Andrew Tridgell
ec21922233
Plane: make wp_distance static
...
removed hack in AP_Camera library
2013-07-15 09:56:28 +10:00
Andrew Tridgell
ed20c4cbc8
Plane: fixed initial reporting of battery remaining
...
we were not showing battery remaining 100% until we used some battery
2013-07-14 21:59:15 +10:00
Andrew Tridgell
d4db2231d4
Plane: change to 2.73beta4
2013-07-13 21:47:22 +10:00
Andrew Tridgell
dc024d425a
Plane: re-do roll hanging in ACRO mode
...
this avoids the euler angle zeros of the previous method by using a
gyro integrator on the roll axis
Pair-Programmed-With: Paul Riseborough <p_riseborough@live.com.au>
2013-07-13 21:45:58 +10:00
Andrew Tridgell
113bc20f8a
Plane: added a new CRUISE flight mode
...
See
http://diydrones.com/group/apmusergroup/forum/topics/feature-request-hold-heading-mode
this fixes issue #438
2013-07-13 21:45:58 +10:00
Andrew Tridgell
ea9ae31a7a
Plane: fixed a bug with altitude drift in FBWB mode
...
not taking account of deadzone correctly
2013-07-12 21:17:09 +10:00
Andrew Tridgell
1d04290eab
Plane: change to 2.74beta3
2013-07-11 11:58:54 +10:00
Andrew Tridgell
608007361b
Plane: added initial implementation of ACRO mode
...
rate based control with attitude locking
2013-07-11 09:10:41 +10:00
Andrew Tridgell
3c97fad2ec
Plane: changes for GPS field changes
2013-07-10 14:04:22 +10:00
Andrew Tridgell
7aa360b176
Plane: added relative_altitude helper functions
...
prevents some code duplication
2013-07-10 14:04:22 +10:00
Paul Riseborough
971d36f06b
Plane: added height to 10Hz TECS call
2013-07-10 14:04:22 +10:00
Andrew Tridgell
f7c8d1e1ee
Plane: use current_loc.alt for altitude to TECS
2013-07-10 11:55:35 +10:00
Craig@3DR
7f4336430a
Plane: trigger picture + logging on camera update_location()
2013-07-10 08:40:01 +10:00
Paul Riseborough
a4f3180e2a
Plane: added support for throttle nudging with TECS
2013-07-09 20:51:03 +10:00
Paul Riseborough
c34803db13
Plane: pass in adjusted height above field to TECS
2013-07-09 09:25:55 +10:00
Andrew Tridgell
9f612f6f78
Plane: only call TECS when throttle is not suppressed
...
this helps prevent integrator buildup on the ground
2013-07-08 12:07:50 +10:00
Andrew Tridgell
1355b6d89d
Plane: break-up scheduling into smaller pieces
...
ensure mavlink sends don't push us over a scheduling boundary
2013-07-05 18:05:27 +10:00
Andrew Tridgell
d30dd7c3f1
Plane: only run TECS when in an auto-throttle mode
...
this prevents integrator buildup in user controlled modes
2013-07-05 14:55:22 +10:00
Andrew Tridgell
dd330885b8
Plane: added compass and baro accumulate functions
2013-07-05 12:59:15 +10:00
Andrew Tridgell
6c7d160ee6
Plane: fixed TECS takeoff detection
2013-07-04 16:56:57 +10:00
Andrew Tridgell
a5bda3ffef
Plane: changed to using a "aircraft parameters" structure
...
this structure can be passed to libraries to give them easy access to
critical user parameters
2013-07-04 16:56:57 +10:00
Paul Riseborough
d62636d309
Plane: added new TECS altitude controller
...
Includes improvements to takeoff/launch detect logic to support hand
launching for X-8 flight
2013-07-04 16:56:57 +10:00
Andrew Tridgell
0d3faeda90
Plane: update_mount assumes 50Hz, for camera trigger
2013-06-25 12:44:26 +10:00
Andrew Tridgell
bb47029564
Plane: enable CAM_TRIGG_DIST parameter
2013-06-25 12:44:26 +10:00
Andrew Tridgell
056e0ca40d
Plane: APM2 doesn't have channel 9 PWM output
2013-06-24 13:06:54 +10:00
Andrew Tridgell
641ad6bc63
Plane: increase time allowed for update_alt()
...
the altitude tracking code can be quite expensive with TECS
2013-06-07 08:41:09 +10:00
Andrew Tridgell
b27ffdd087
Plane: new plane beta 2.74beta2
2013-06-04 15:10:11 +10:00
Andrew Tridgell
c008fa764c
Plane: update_commands() can take 7ms if it needs to write a waypoint
2013-06-04 13:42:25 +10:00
Andrew Tridgell
93cd0f9a31
Plane: switch to new AP_Scheduler
...
this gives us more accurate task scheduling in ArduPlane, plus better
monitoring of task timing (via SCHED_DEBUG)
2013-06-04 13:34:58 +10:00
Andrew Tridgell
02d72ffcba
Plane: make it possible to change board orientation at runtime
2013-06-03 16:52:44 +10:00
Andrew Tridgell
4c9bc30f58
Plane: make it possible to change control channel ordering without reboot
...
this makes configuration a bit easier
2013-06-03 16:42:38 +10:00
Andrew Tridgell
fb9bf21522
Plane: allow channel mapping of first 4 channels
...
this makes it easier to support DSM and SBUS radios
2013-06-03 16:23:48 +10:00
Andrew Tridgell
f7697574db
Plane: use the new airspeed driver interface
...
the choice of analog source is now in the airspeed driver
2013-06-03 11:51:09 +10:00
Andrew Tridgell
bb3171ab5f
Plane: zero attitude integrators on the ground
2013-06-01 22:29:38 +10:00
Andrew Tridgell
cd55ed45e2
Plane: removed the old roll/pitch/yaw PID controllers
...
use the new controllers, with auto parameter conversion
2013-05-31 14:06:56 +10:00
Andrew Tridgell
eba7d6da9a
Plane: removed the old crash_timer code
...
This code is less relevent with the new L1 navigation, and could cause
issues with the pilot not having control after a long dive.
Thanks to Soren for pointing out the issues
See issue #305
2013-05-28 11:19:28 +10:00
Andrew Tridgell
dd633fcf3f
Plane: make voltage and battery capacity failsafe settable at runtime
...
this also fixes issue #292
2013-05-22 20:33:57 +10:00
