Commit Graph

42641 Commits

Author SHA1 Message Date
Andy Piper
da166b256d GCS_MAVLink: add messages to Spektrum telemetry if it is enabled 2020-05-05 09:23:15 +10:00
Andy Piper
d0cd494178 waf: add AP_RCTelemetry to build 2020-05-05 09:23:15 +10:00
Andy Piper
68c6a3b03d AP_RCProtocol: SRXL2 support 2020-05-05 09:23:15 +10:00
Peter Barker
967f8bf726 AP_HAL_ChibiOS: correct description of where stdout goes 2020-05-05 07:57:57 +10:00
david sastre
f8b6d4b0ac AP_Parachute: Fix singleton panic message 2020-05-05 07:43:02 +10:00
Peter Barker
bd0ebb5778 autotest: accept statustext and ack in any order for mission errors
Accept statustext/ack in any order; statustext may come after ack
2020-05-04 18:42:18 +10:00
Andrew Tridgell
e126b6d346 HAL_ChibiOS: fixed race condition in storage write
we could mark a line as clean when it should be dirty if we lose a
race condition between storage thread and writer
2020-05-04 17:22:41 +10:00
Andrew Tridgell
0c1ba48212 AP_NavEKF3: fixed external yaw EK3_MAG_CAL=5 or 6
don't use GSF
2020-05-04 15:05:56 +10:00
Peter Barker
f43e48a6f1 AP_Filesystem: correct comparison of signed/unsigned
Closes #14267
2020-05-04 12:06:30 +10:00
Peter Barker
ebc781ba3a autotest: switch to looking for barometer update string for passthrough test
MAVProxy can fetch parameters using FTP rather than normal param
mechanism.  Currently this does not emit any of our statustext
information - like the text we're looking for in this test
2020-05-04 10:07:38 +10:00
Peter Barker
d197fd4acf autotest: fix rare, random failure in GCSRally test
Notionally the statustext could be put aside and we could not have room
for it, so we see the ack first.
2020-05-04 00:22:54 +10:00
Lucas De Marchi
29d8586ea4 AP_HAL_Linux: RCInput_UDP: accept up to 16 channels
This allows more channels to be passed to RCInput_UDP protocol while
also allowing less than 8 channels - this is similar to the approach
used by SITL in which the packet size is used to figure out the number
of channels.
2020-05-03 00:07:52 -07:00
Randy Mackay
944939fde3 Copter: remove unused heli definitions 2020-05-02 11:32:09 +09:00
Randy Mackay
e889f6091e Copter: fix Throw param desc 2020-05-02 11:32:06 +09:00
Dr.-Ing. Amilcar do Carmo Lucas
d1eb03df30 Copter: Report MAV_SYS_STATUS_SENSOR_Z_ALTITUDE_CONTROL and MAV_SYS_STATUS_SENSOR_XY_POSITION_CONTROL as healthy if the flight mode says so.
Brings it up to the Sub and Plane status
2020-05-01 08:14:11 +09:00
Andrew Tridgell
f0fb64005d AP_Filesystem: document extra restrictions in param.pck 2020-04-30 21:15:28 +10:00
Andrew Tridgell
685d0666e9 AP_Filesystem: added README on VFS interface 2020-04-30 21:04:12 +10:00
Pierre Kancir
d83b9575da Tools: vagrant: check for $HOME/.local/bin on init for local python package 2020-04-30 20:32:34 +10:00
Pierre Kancir
05f8d7647a Docker: update the docker file and add .dockerignore
simplify the contenair
Correctly install the STM toolchain and ccache
Add bash completion
2020-04-30 20:32:34 +10:00
Pierre Kancir
ced185b59b Tools: Completion: fix vehicle type competion 2020-04-30 20:32:34 +10:00
Pierre Kancir
64b7e8fb9e Tools: prereqs-ubuntu: cleanup and improvements
reorder install
remove unneeded package
make install verbose
add environment variable to control what to install
register STM toolchain on CCache

Tools: install-prereqs-ubuntu.sh: only update package list once

Tools: install-prereqs-ubuntu.sh: move STM toolchain registery into install step

Tools: install-prereqs-ubuntu.sh: use right comparison for variable value

Tools: install-prereqs-ubuntu.sh: always check for libtool-bin

Tools: install-prereqs-ubuntu.sh: Add support for Ubuntu 20.04

Add a selection for python version
ass python symlink for ubuntu 20.04
Move python-argparse out of default list as it install python2 version

Tools: install-prereqs-ubuntu.sh:Tools: Check python version for python3 distro

Tools: install-prereqs-ubuntu.sh: install pygame requirements

Tools: install-prereqs-ubuntu.sh: check for docker envirement and use .bashrc instead of .profile

Tools: install-prereqs-ubuntu.sh: add bash completion by default

Tools: install-prereqs-ubuntu.sh: better ccache management

Tools: install-prereqs-ubuntu.sh: Correct package installation for trusty
2020-04-30 20:32:34 +10:00
Pierre Kancir
2b2dcbb6d8 Tools: Configure-ci: correct some mistakes 2020-04-30 20:32:34 +10:00
Randy Mackay
183ce50138 AP_NavEKF3: check GPS used before resetting pos due to GPS receiver change 2020-04-30 15:55:59 +09:00
Randy Mackay
f79d5d2d2c AP_NavEKF3: handle external nav position reset 2020-04-30 15:55:59 +09:00
Randy Mackay
cbb25311bb AP_NavEKF3: setAidingMode uses lastExtNavPassTime_ms 2020-04-30 15:55:59 +09:00
Randy Mackay
d763597065 AP_NavEKF3: compensate for visual odometry sensor position 2020-04-30 15:55:59 +09:00
priseborough
c5e465aec9 AP_NavEKF3: add external nav system support
includes decoupling height source from use of external nav data
2020-04-30 15:55:59 +09:00
priseborough
471372cc7f AP_AHRS: Write external nav data to EKF3 2020-04-30 15:55:59 +09:00
Peter Barker
610d43556c Rover: create and use INTERNAL_ERROR macro so we get line numbers 2020-04-30 13:21:36 +10:00
Peter Barker
2c16810493 ArduSub: create and use INTERNAL_ERROR macro so we get line numbers 2020-04-30 13:21:36 +10:00
Peter Barker
86c765d8c9 ArduPlane: create and use INTERNAL_ERROR macro so we get line numbers 2020-04-30 13:21:36 +10:00
Peter Barker
ba5bbcdea7 ArduCopter: create and use INTERNAL_ERROR macro so we get line numbers 2020-04-30 13:21:36 +10:00
Peter Barker
19f298e04c AntennaTracker: create and use INTERNAL_ERROR macro so we get line numbers 2020-04-30 13:21:36 +10:00
Peter Barker
81454c7a40 GCS_MAVLink: create and use INTERNAL_ERROR macro so we get line numbers 2020-04-30 13:21:36 +10:00
Peter Barker
58a8e54d83 AP_Math: create and use INTERNAL_ERROR macro so we get line numbers 2020-04-30 13:21:36 +10:00
Peter Barker
7befe84f0c AP_Logger: create and use INTERNAL_ERROR macro so we get line numbers 2020-04-30 13:21:36 +10:00
Peter Barker
f0b38fa11c AP_IOMCU: create and use INTERNAL_ERROR macro so we get line numbers 2020-04-30 13:21:36 +10:00
Peter Barker
a30cdabb34 AP_InternalError: create and use INTERNAL_ERROR macro so we get line numbers 2020-04-30 13:21:36 +10:00
Peter Barker
5f8a9d1e15 AP_HAL_SITL: create and use INTERNAL_ERROR macro so we get line numbers 2020-04-30 13:21:36 +10:00
Peter Barker
141d7fed48 AP_HAL: create and use INTERNAL_ERROR macro so we get line numbers 2020-04-30 13:21:36 +10:00
Peter Barker
48da4e523c AP_HAL_ChibiOS: create and use INTERNAL_ERROR macro so we get line numbers 2020-04-30 13:21:36 +10:00
Peter Barker
37cddbeea6 AP_FlashStorage: create and use INTERNAL_ERROR macro so we get line numbers 2020-04-30 13:21:36 +10:00
Peter Barker
8e82ea2540 AP_Common: create and use INTERNAL_ERROR macro so we get line numbers 2020-04-30 13:21:36 +10:00
Peter Barker
119eef9954 AP_Arming: create and use INTERNAL_ERROR macro so we get line numbers 2020-04-30 13:21:36 +10:00
Peter Barker
36fd632a49 AP_AHRS: create and use INTERNAL_ERROR macro so we get line numbers 2020-04-30 13:21:36 +10:00
Peter Barker
069bd04bdc AC_Fence: create and use INTERNAL_ERROR macro so we get line numbers 2020-04-30 13:21:36 +10:00
pkocmoud
75b5e20c6a build_binaries.py: add mRo MN10070 Location One CAN GPS 2020-04-30 11:31:43 +10:00
pkocmoud
defb7dc43f hwdef: add mRo M10070 Location One CAN GPS 2020-04-30 11:31:43 +10:00
Patrick José Pereira
3268c234d8 AP_HAL_Linux: Add PAGE_SIZE in RCInput_RPI
Signed-off-by: Patrick José Pereira <patrickelectric@gmail.com>
2020-04-29 02:12:58 -07:00
Patrick José Pereira
32c0e37512 AP_HAL_Linux: Organize and document GPIO_RPI class
- Move macros to functions and improve explanation about logic behind it
- Break code in functions to make it more readable
- Add doxygen comments about functions and how they work in a comprehensive manner
- Improve general code maintainability

Signed-off-by: Patrick José Pereira <patrickelectric@gmail.com>
2020-04-29 02:12:58 -07:00