Michael du Breuil
b5bc9e5147
Rover: Remove unneeded battery failsafe flag clearing
2018-06-27 11:39:35 +10:00
Peter Barker
87a3fcdd02
Rover: remove usb-mux checking
...
Nobody ever uses the result from this
2018-06-20 02:12:56 +01:00
Peter Barker
ab6cf171da
Rover: use AP_FWVersion singleton
2018-06-18 19:10:37 +01:00
Randy Mackay
c51b38cd1c
Rover: rename Log_Arm_Disarm to Log_Write_Arm_Disarm
2018-06-12 08:29:08 +09:00
Peter Barker
36705af8ff
Rover: create an enumeration to hold vehicle mode constants
...
This gives us type-safety on the mode numbers. This is advantageous as
some of these symbols exist with different values elsewhere in the code.
2018-06-08 08:41:16 +09:00
Randy Mackay
73bdc3be09
Rover: set ahrs flyforward if thr over 15% for 2 seconds
...
or if throttle is positive and desired speed over 0.5m/s
2018-05-29 16:37:31 +09:00
Peter Barker
3afe591368
Rover: correct compilation when logging is disabled
2018-05-10 17:55:13 +09:00
Andrew Tridgell
a575608110
Rover: fixed build warnings
2018-05-07 11:43:23 +10:00
night-ghost
2aee8d1018
APMrover2: devo telemetry support (RX705/707)
2018-04-24 10:44:28 +10:00
Peter Barker
63e8fffbe4
Rover: Baro does its own dataflash logging now
2018-04-12 19:12:12 +01:00
Michael du Breuil
05173f24c6
Rover: Use RC_Channels instead of hal.rcin
2018-04-11 21:47:07 +01:00
Peter Barker
c10f404b12
Rover: tidy handling of barometer calibrations
2018-04-02 23:25:05 +01:00
Randy Mackay
96ae9cef14
Rover: send correct mav-type for boats
2018-03-22 09:11:52 +09:00
night-ghost
bab54ea647
Rover: allow AP_Stats to be optional
2018-03-02 07:23:35 +11:00
Peter Barker
9511e72113
Rover: use PerfInfo for performance monitoring
2018-02-13 17:15:05 +11:00
Peter Barker
df304c5e6b
Rover: remove shims used in scheduler table
2018-02-12 15:39:26 +09:00
Peter Barker
89c830e949
Rover: make SmartRTL mode decide whether to save position or not
...
This changes things to work like the Copter equivalent
2018-02-12 15:39:26 +09:00
khancyr
5503a0069d
Rover: add proximity library
2018-01-22 17:18:41 +09:00
khancyr
c3fb985ec5
Rover: add fence support
2018-01-22 17:18:41 +09:00
Dylan Herman
3edaff0309
Rover: sets SmartRTL home after ahrs home is set
...
Now uses AP_SmartRTL::set_home. It is called when arming and when GCS
requests home to be set to the current location
2018-01-17 11:03:56 +09:00
Randy Mackay
241456f55f
Rover: remove auto trim at startup
...
Also add additional checks to auto trim
2017-12-15 20:26:40 +09:00
Randy Mackay
f6f40afcda
Rover: rename control_mode_from_num to mode_from_mode_num
2017-12-12 10:39:26 +09:00
Randy Mackay
aa38239629
Rover: add FRAME_CLASS to differentiate boats from rovers
2017-12-08 08:48:05 +09:00
Randy Mackay
ed558dd9a0
Rover: play sad tune when arming fails
2017-12-01 21:59:55 +09:00
Peter Barker
e38cefea8a
Rover: add SmartRTL mode
...
called at 3hz from scheduler
2017-12-01 09:28:56 +09:00
Peter Barker
45d76bdf25
Rover: add name4() to Mode and use it for AP_Notify calls
2017-11-29 14:03:43 +09:00
Randy Mackay
04e9228fa0
Rover: add Acro mode
...
ACRO_TURN_RATE allows user control of maximum turn rate
2017-11-29 14:03:43 +09:00
André Kjellstrup
aab22d7dad
Rover: Option to trig by distance only when in AUTO mode
2017-11-14 00:10:22 +00:00
Tom Pittenger
f7d07fc146
Rover: always log MODE and include reason when logging is enabled
2017-10-25 21:18:29 +11:00
Lucas De Marchi
f5c2ffffb9
global: remove DataFlash from AP_Mount::init()
2017-09-26 03:01:21 +01:00
Lucas De Marchi
27be369be7
APMrover2: do not include version.h/ap_version.h
...
The interface provided by each vehicle should be used to get the
version.
2017-09-23 21:37:45 -07:00
Peter Barker
d98c427514
Rover: add constant structure holding firmware version
2017-08-30 15:54:46 +01:00
Randy Mackay
14c74a5967
Rover: remove learning mode
...
saving waypoints can be done in manual or steering mode
2017-08-25 14:05:23 +09:00
Randy Mackay
524fe4cd82
Rover: aux switch saves waypoint in manual or steering modes
...
Also refactor aux switch methods
rename LEARN_CH to AUX_CH
2017-08-25 14:05:23 +09:00
khancyr
4c977f16ce
Rover: reduce ADC warm up time
2017-08-24 20:41:16 +09:00
Randy Mackay
6eceaef484
Rover: remove redundant SYS_NUM_RESETS
...
this is handled by AP_Stats library
2017-08-17 09:39:40 +09:00
Peter Barker
f3a0d2b02b
Rover: use GCS_MAVLINK subclasses to handle set_mode
2017-08-16 11:58:10 +10:00
Peter Barker
fa2b500e93
Rover: remove CLI
2017-08-14 10:23:50 +09:00
Randy Mackay
30852d4713
Rover: auto-reversed moved to mode
2017-08-05 11:20:58 +09:00
khancyr
23532bf45c
Rover: add reason to set_mode
2017-07-31 18:01:17 +09:00
Peter Barker
07f4603533
Rover: integrate mode class
2017-07-21 10:13:20 +09:00
Peter Barker
9173c7caaf
Rover: move starting of new logs into DataFlash
2017-07-19 16:37:28 +01:00
khancyr
40b860e240
Rover: rename sonar to rangefinder
2017-07-14 17:40:05 +01:00
Randy Mackay
ebbbe0584a
Rover: integrate wheel encoder
2017-07-14 07:27:26 +09:00
khancyr
b28656eb11
Rover: reoder rc and servo init
2017-07-10 19:48:35 +09:00
Peter Barker
9509f7f1bf
Rover: use send_text method on the GCS singleton
2017-07-09 17:17:29 -04:00
Pierre Kancir
267a1532b9
Rover: integrate motors library
...
move throttle_slew_limit and THR_SLEWRATE parameter
move have_skid_steering to library
move mix_skid_steering to library's output_skid_steering method
move radio.cpp's output channel initialisation to motor's init method
use motors.get_throttle and get_steering instead of getting from Servo objects
use motors.set_throttle and set_steering instead of setting to Servo object
AP_Arming::arming_required is replaced with SAFE_DISARM parameter
2017-07-08 16:07:13 +09:00
Peter Barker
cfeb449979
Rover: create GCS subclass, use inheritted methods
2017-07-07 16:18:37 +01:00
Eugene Shamaev
b6c397c85a
APMrover2: move of CAN parameters into separate group
2017-07-03 11:44:32 +01:00
Peter Barker
4646eb3b95
Rover: check dataflash to see if we should log backend gps messages
2017-06-29 15:43:38 +01:00
Peter Barker
dcad79bdef
Rover: use DataFlash should_log to determine raw IMU logging
2017-06-29 15:26:27 +01:00
Peter Barker
8697faa44f
Rover: move should_log check of log bitmask into DataFlash
2017-06-29 15:26:27 +01:00
Randy Mackay
351b37fc31
Rover: only report system status after init has completed
...
This reduces errors reported to the GCS during startup
2017-06-28 11:32:01 +09:00
Peter Barker
3a85d8ed39
Rover: handle knowledge of in_log_download in DataFlash
2017-06-27 03:10:43 +01:00
Pierre Kancir
0017485ee7
Rover: move failsafe_trigger from system to failsafe
2017-06-24 13:17:35 +09:00
Pierre Kancir
feb8c30af4
Rover: move rssi.init and set_control_channels
2017-06-24 13:16:54 +09:00
Pierre Kancir
32dc59baec
Rover: fix throttle slew limit for skid steer out
2017-06-24 13:16:40 +09:00
Peter Barker
aeacc11573
APMrover2: stop using in_mavlink_delay as a proxy for disabling logging
2017-06-16 17:07:48 +01:00
Peter Barker
0df30d03b1
Rover: call dataflash should_log method
2017-06-16 17:07:48 +01:00
Randy Mackay
a07920c5b2
Rover: add init_compass method
...
no functional change
2017-06-14 09:12:20 +09:00
Randy Mackay
0da6e73d76
Rover: add support for visual odometry
2017-06-14 09:12:20 +09:00
Peter Barker
81b19204c3
Rover: StartUnstartedLogging replaces logging_started/start_logging
2017-06-11 20:34:12 +01:00
Peter Barker
c5d40fd8b4
Rover: simplify should_log (NFC)
2017-06-11 20:34:12 +01:00
Randy Mackay
d6b55b2d09
Rover: set_guided_WP accepts location
2017-05-04 19:53:21 +10:00
Peter Barker
74e0d6c60a
Rover: move init of DataFlash references into vehicle init
...
It is possible to start a log before the existing codepath is crossed.
2017-05-01 15:04:34 +01:00
Andrew Tridgell
c5d17a9d92
Rover: call BoardConfig.init_safety() at end of startup
...
this fixes a bug where motors can start on soft reboot
2017-04-30 21:47:04 +10:00
karthik.desai
47ff9ddeec
Rover: Added Beacon implementation
...
Enabled beacon parameters
beacon updates at 50hz
Use dataflash library to log AP_Beacon msg
2017-04-26 11:59:11 +09:00
Pierre Kancir
20cc336885
APMRover2: const correctness
2017-04-26 08:43:09 +10:00
Pierre Kancir
c41e695c98
APMRover2: correct some style
2017-04-26 08:43:09 +10:00
Pierre Kancir
b634fe548d
APMRover2: Use c++ cast
2017-04-26 08:43:09 +10:00
Grant Morphett
304c9b6e72
Rover: Fixed a bug in reverse
...
If a user was driving in reverse and when into an auto mission the
rover would try to do the whole mission in reverse. This fixes that.
2017-03-15 17:24:35 +11:00
Pierre Kancir
1bd863e36b
ROVER: stop mission when leaving AUTO
2017-03-09 22:17:01 +11:00
Peter Barker
45e0765b97
Rover: Support for a GCS singleton
2017-02-13 09:32:01 +11:00
Peter Barker
407e251e1d
Rover: rename gcs[] to gcs_chan[]
...
Wish to use gcs() to return the gcs singleton
2017-02-13 09:32:01 +11:00
murata
0c813c5afa
Rover: Unify from print or println to printf.
2017-01-27 18:20:22 +11:00
Randy Mackay
cc64c5e44a
Rover: notify initialised after parameters loaded
2017-01-23 15:07:21 -08:00
Randy Mackay
0b8ebe36dd
Rover: send flight mode string to Notify
2017-01-23 15:07:21 -08:00
Andrew Tridgell
93d6b012c2
Rover: convert to new SRV_Channel API
2017-01-12 17:39:37 +11:00
Pierre Kancir
52aa6b5767
Rover: system.cpp correct whitespace, remove tabs
2016-12-30 09:20:24 +09:00
Peter Barker
dab0d8e6e2
Rover: inform dataflash of vehicle arm state
2016-11-28 09:42:09 -08:00
Grant Morphett
86d4fcfb32
Rover: Station Keeping is implemented via NAV_LOITER_COMMAND
...
It is a very simply form of station keeping. If a boat is
loitering on a waypoint and it gets blown off a distance
past the WAYPOINT_RADIUS it will automaticlly drive back to
the waypoint.
2016-10-30 22:50:03 +11:00
Peter Barker
36c0bacada
Rover: support for AP_Stats (flight time, bootcount, runtime)
2016-10-29 14:53:25 +09:00
murata
a71e889f51
Rover: To nullptr from NULL.
2016-10-28 16:22:44 -03:00
Mathieu OTHACEHE
152edf7189
Global: remove mode line from headers
...
Using a global .dir-locals.el file is a better alternative than
reincluding the same emacs header in every file of the project.
2016-10-24 09:42:01 -02:00
Andrew Tridgell
114b885162
Rover: fixed startup order of setting mavlink system ID
2016-10-17 09:21:20 +11:00
Tom Pittenger
1bd882a07c
Rover: frsky telem init to utilize default arguments
2016-09-25 10:42:02 -07:00
floaledm
4c4648bdf8
Rover: consolidate into a single frsky.init()
2016-09-25 10:42:02 -07:00
Andrew Tridgell
203e0c7472
Rover: fixes for Frsky_Telem API changes
2016-08-25 10:16:19 +10:00
floaledm
4030851207
Rover: removed frsky_telemetry_send scheduled task
2016-08-25 10:16:17 +10:00
Andrew Tridgell
a0d4feb216
Rover: changed startup order
...
this allows BoardConfig to report errors in a way that allows for
BRD_TYPE to be changed by the user
2016-08-10 19:54:01 +10:00
Grant Morphett
57c23c7fe3
Rover: Adding support for rovers driving in Reverse.
2016-07-17 08:15:34 +10:00
Grant Morphett
094d571196
Rover: Skid steering disarming fixes
...
I have disabled steering disarming for skid steering rovers. Its
perfectly reasonable for a skid steering rover to go hard left on the
spot without any throttle and the user wouldn't want the rover to
disarm during this procedure.
If you disarm from the GCS for a skid steering rover we also ensure
the steering channel is disabled.
2016-06-01 10:12:02 +10:00
Andrew Tridgell
f61ba903dd
Rover: don't stall EKF during baro cal
2016-05-24 17:00:55 +10:00
Andrew Tridgell
99cc737693
Rover: simplify UART setup
2016-05-21 15:25:16 +10:00
Lucas De Marchi
368a72044c
APMrover2: fix indentation leading to compiler warning
...
GCC 6 has a new warning about misleading indentation:
../../APMrover2/system.cpp: In member function ‘void Rover::set_mode(mode)’:
../../APMrover2/system.cpp:272:5: warning: this ‘if’ clause does not guard... [-Wmisleading-indentation]
if (control_mode == AUTO)
^~
../../APMrover2/system.cpp:275:2: note: ...this statement, but the^Bn latter is misleadingly indented as if it is guarded by the ‘if’
control_mode = mode;
^~~~~~~~~~~~
The issue here is that we are mixing tabs and spaces. Remove tabs and re-indent
the code.
2016-05-16 17:35:58 -03:00
Andrew Tridgell
c0172516af
Rover: use DataFlash::log_while_disarmed()
2016-05-09 12:06:00 +10:00
Lucas De Marchi
d3ee998fa6
APMrover2: use separate header for version macro
...
Having the version macro in the config.h and consequently in the main
vehicle header means that whenever the version changes we need to
compiler the whole vehicle again. This would not be so bad if we weren't
also appending the git hash in the version. In this case, whenever we
commit to the repository we would need to recompile everything.
Move to a separate header that is include only by its users. Then
instead of compiling everything we will compile just a few files.
2016-05-06 13:11:28 -03:00
Tom Pittenger
c38bec6385
Rover: use set_dataflash() for static logging
2016-02-24 09:18:05 +11:00
Jonathan Challinger
f1db10c337
APMrover2: reflect changes to AP_Mount
2016-01-23 10:35:45 +09:00
Siddharth Bharat Purohit
53d3e7dc61
Rover: wire up accel calibrator for Rover
2015-12-29 10:46:35 -08:00