Tom Pittenger
6c0296ba13
AP_Landing: shadow copy of plane flight_stage into landing
...
.. and describe stages without using specific stage name
2017-01-26 13:11:43 -08:00
Tom Pittenger
d1434602a5
AP_TECS: bug fix - use takeoff integrator during land abort
2017-01-26 13:11:43 -08:00
Peter Barker
817efe9b6d
Tools: expect message for EKF readiness rather than sleeping
...
This solves a problem for me when running Valgrind as
30s was not sufficient
2017-01-26 16:53:13 +11:00
Francisco Ferreira
1fc0dbe0bd
AP_GPS: fix GSOF highest supported status
2017-01-26 00:04:32 +00:00
Michael Oborne
8e9f382240
AP_GPS_GSOF: update for new GPS_FIX's
2017-01-26 00:04:19 +00:00
Michael du Breuil
0cf41c9288
AP_GPS: Force ublox baud rate if we are allowed to config the GPS
2017-01-26 07:48:22 +09:00
Mathieu OTHACEHE
7c96f8e6a2
AP_HAL_Linux: rename APM to ardupilot.
...
This rename should have happened here:
fdb2a9c99b
but was forgotten.
2017-01-25 16:57:47 +00:00
Andrew Tridgell
07cedd8a66
Plane: prevent stability shutdown in transition
...
this prevents the vertical motors from shutting down while
transitioning if the desired throttle was too low at the start of the
transition
2017-01-25 19:01:15 +11:00
Andrew Tridgell
0d4405106f
Plane: removed forcing of trim for motors in quadplane
...
this caused problems with tricopter tail servos
2017-01-25 19:01:15 +11:00
Andrew Tridgell
642e5aa5b7
SITL: match simulated tilt rate for CL84 to real vehicle
2017-01-25 19:01:15 +11:00
Andrew Tridgell
715db62a85
autotest: added quadplane-cl84 support
2017-01-25 19:01:15 +11:00
Andrew Tridgell
5c820adad4
Plane: fixed tilt transition with binary tilt servo
...
once the tilt is fully fwd then force transition as done at any
airspeed
2017-01-25 19:01:15 +11:00
Andrew Tridgell
586f8a9ca8
Plane: fixes for tilt quadplane after rebase
2017-01-25 19:01:15 +11:00
Andrew Tridgell
2feaa9926c
Plane: prevent fwd motor when throttle in dead zone for tiltrotor
...
otherwise we end up with the SPIN_ARMED value
2017-01-25 19:01:15 +11:00
Andrew Tridgell
54bca768b8
Plane: added Q_TILT_TYPE for retract servo tiltrotors
2017-01-25 19:01:15 +11:00
Michael du Breuil
855d91145a
AP_GPS: ublox - fix incorrect step ordering
2017-01-25 03:44:57 +00:00
Michael du Breuil
1c1e6e9398
AP_GPS: Support more fix types
2017-01-25 03:44:42 +00:00
Michael du Breuil
9346117c01
Notify: Update for GPS types
2017-01-25 03:34:26 +00:00
Michael Oborne
d05b0d5885
AP_GPS_UBLOX: add pvt message support
2017-01-25 03:34:26 +00:00
Randy Mackay
fc6ab3e29e
mavlink: update submodule reference to include SYS_STATUS_SENSOR_BATTERY
2017-01-25 09:50:53 +09:00
Michael du Breuil
0fec4af54b
Copter: Support the SYS_STATUS_SENSOR_BATTERY bit
2017-01-25 09:26:19 +09:00
Michael du Breuil
f017073077
Plane: Report battery failsafes via sys_status
2017-01-25 09:26:19 +09:00
Michael du Breuil
e12b932432
MAVLink: Update reference to include MAV_STS_STATUS_SENSOR_BATTERY
2017-01-25 09:26:19 +09:00
Randy Mackay
b67512aae9
Tracker: send text to notify
2017-01-23 15:07:21 -08:00
Randy Mackay
a04cdce1bc
Tracker: notify initialised after parameters loaded
2017-01-23 15:07:21 -08:00
Randy Mackay
c701d6a715
Rover: send text to notify
2017-01-23 15:07:21 -08:00
Randy Mackay
cc64c5e44a
Rover: notify initialised after parameters loaded
2017-01-23 15:07:21 -08:00
Randy Mackay
fc4741395d
Plane: notify initialised after parameters loaded
2017-01-23 15:07:21 -08:00
Randy Mackay
1300a9d3c6
AP_Notify: minor formatting fixes
...
no functional change
2017-01-23 15:07:21 -08:00
Randy Mackay
4691bc76f3
AP_Notify: display gets semaphore protecting display buffer
2017-01-23 15:07:21 -08:00
Randy Mackay
80c1433682
AP_Notify: Display backend methods become void
...
We never use the return value so might as well remove it
2017-01-23 15:07:21 -08:00
Randy Mackay
0b8ebe36dd
Rover: send flight mode string to Notify
2017-01-23 15:07:21 -08:00
Randy Mackay
fad2ba608f
Plane: send flight mode string to Notify
2017-01-23 15:07:21 -08:00
Randy Mackay
26919b4ab6
Copter: send flight mode string to Notify
2017-01-23 15:07:20 -08:00
Randy Mackay
cb1d1df03a
AP_Notify: reorder flags
...
This tiny improvement allows the flags above battery voltage to be squeezed into the same byte
2017-01-23 15:07:20 -08:00
Randy Mackay
e085ae1ec8
AP_Notify: add set_flight_mode_str method
...
This allows the vehicle code to set a short string for the flight mode
2017-01-23 15:07:20 -08:00
Randy Mackay
acff67c718
AP_Notify: Display_SH1106 command stucture clarification
...
renaming the elements of the structure makes their purpose more clear
2017-01-23 15:07:20 -08:00
Randy Mackay
fd365de5f8
AP_Notify: Display structures PACKED
2017-01-23 15:07:20 -08:00
Randy Mackay
843210cac2
AP_Notify: Display bus passed into contructor
2017-01-23 15:07:20 -08:00
Randy Mackay
682fc759f1
AP_Notify: minor formatting and comment changes
...
No functional change
2017-01-23 15:07:20 -08:00
Randy Mackay
d12e0d6a82
AP_Notify: Display send_text made not static
2017-01-23 15:07:20 -08:00
Randy Mackay
07c08c09a3
AP_Notify: small change to Display health logic
2017-01-23 15:07:20 -08:00
Randy Mackay
847c68bf72
AP_Notify: remove comment
2017-01-23 15:07:20 -08:00
Randy Mackay
21a95a3b0a
AP_Notify: Display screenpage variable made part of class
2017-01-23 15:07:20 -08:00
Randy Mackay
af514eb101
Copter: remove some comments
2017-01-23 15:07:20 -08:00
Randy Mackay
c5ba54c3fe
AP_Notify: adjust Display class structure
...
This makes the display architecture closer to our other frontend/backend splits
Added check that display is initialised successfully in hw_init
Renamed _update_timer to just _timer to make more consistent with other drivers
2017-01-23 15:07:20 -08:00
Randy Mackay
0690315814
AP_Notify: remove unused methods and member from Display
2017-01-23 15:07:20 -08:00
Randy Mackay
f0c6fd3038
AP_Notify: resolve compiler warning in Display
2017-01-23 15:07:20 -08:00
Dmitry Prokhorov
497a4bd4a5
ArduPlane: Support for OLED display by Alexey Kozin
...
https://github.com/ArduPilot/ardupilot/pull/5135
2017-01-23 15:07:20 -08:00
Dmitry Prokhorov
3e993f955e
ArduCopter: Support for OLED display by Alexey Kozin
2017-01-23 15:07:20 -08:00