Jason Short
2600f19172
RTL Yaw hold as default
2011-11-20 12:50:13 -08:00
Jason Short
fbf09dbf2d
Made save WP the default
...
Cosmetic updates
2011-11-20 12:50:12 -08:00
Jason Short
9bc4328724
Added crosstrack gain and lowered alt hold rate gain
2011-11-19 13:59:15 -08:00
Jason Short
937a364dce
Made RTL Altitude hold current by default
2011-11-16 00:22:23 -08:00
Jason Short
930ee51bbe
added scale note
2011-11-13 00:25:04 -08:00
Jason Short
fafa6e52e9
back to original config for testing
2011-11-09 13:53:26 -08:00
Jason Short
f994d16a48
Lowered Nav_P based on SIM data
2011-11-09 12:46:34 -08:00
Jason Short
a8d622d8e6
Lowered Nav_P I term to ramp slower base on SIM
2011-11-09 11:30:50 -08:00
Jason Short
2dc2a2114a
restoring throttle i term for SIM
2011-11-08 11:51:49 -08:00
Jason Short
10bbfdbe11
PID test for alt hold to narrow down on a bug
2011-11-08 10:13:16 -08:00
Jason Short
3153257d37
default top_bottom ratio 1.0
2011-11-06 22:43:49 -08:00
Jason Short
1df9f8488d
updated Alt hold PIDs
2011-11-01 09:30:34 -07:00
Jason Short
07daf34ccc
Added a slew rate to the alt change rate.
...
Added better reporting of throttle control
upped constraints for alt hold
Additional logging for CTUN lay hold
2011-10-28 21:29:10 -07:00
Jason Short
27d9712e80
Merge branch 'master' of https://code.google.com/p/ardupilot-mega
...
Conflicts:
libraries/APM_PI/APM_PI.cpp
2011-10-27 12:41:00 -07:00
Jason Short
0b4a3ccadb
Acro PI defaults
2011-10-27 11:55:13 -07:00
Andrew Tridgell
5a44298d57
CLI: enable "hit enter 3 times" support for CLI
...
if you hit enter 3 times before you send any mavlink packets, we will
enter CLI mode
2011-10-27 21:54:07 +11:00
Jani Hirvinen
a503d9a7a7
adding missing config parameters
2011-10-21 10:41:52 +07:00
Jason Short
42d0b5cdb3
tweaked Alt hold PIDs, loiter PIDs based on SIM testing and feedback.
...
Increased distance error for loiter for faster return to center.
2011-10-16 15:41:54 -07:00
Jason Short
6a5aefd0ec
Added gains to adjust travel of camera.
2011-10-15 16:34:57 -07:00
Jason Short
4052fd4f73
Made wpspeed governor run per second so 1hz gps doesn't fail. Gave a 1m/s minimum. Increased WPspeed max to 4.0m/s
2011-10-15 15:35:18 -07:00
Jason Short
43b3015963
lowered DCM RP gains
...
made Instant_PWM optional
upped PWM output to 400hz
2011-10-11 22:20:23 -07:00
Andrew Tridgell
d89ae696ef
merged the GCS updates from ArduPlane to ArduCopter
...
this removes all the non-MAVLink GCS options, and simplifies the HIL
and GCS code a lot. It also adds async sending of low priority GCS
text messages.
2011-10-11 20:53:43 +11:00
Jason Short
167df79b49
Better Loiter PIDs
...
Fixed RTL overshoot bug
2011-10-06 17:42:09 -07:00
Jason Short
b0bd9d1c44
Added second PI loop for alt hold.
...
Upped gains for default JDrones Frame
added gains for second PI loop for alt
removed some tests for 1280 space constraints
2011-10-02 11:36:23 -07:00
Jason Short
de61e87128
Added ADC gyro Filtering for quads - this fixes a noise issue introduced into the controller
...
added Position mode
removed
Added back in the accelerometer experiment
Added filter_result boolean to enable filter on the fly
2011-09-29 23:27:23 -07:00
Jason Short
758d0e1aec
Attempting to mimic loiter values for 4.0.42
...
lowered Rate Error max in loiter
2011-09-28 23:11:19 -07:00
Jason Short
c209d6e6dd
2.0.46 -Not flight tested!
...
restored 42 alt hold code
removed throttle timer, replaced with safer constant
increased alt control range
reformatted nav_rate calls
removed unused simple mode defines
set alt hold home to 10m
tuned down rateP to .13 from .14 for broader application.
2011-09-27 09:35:05 -07:00
Jason Short
b2a2221474
Fixed issue with Simple mode changes.
...
Reverted to simpler, safer timer code for throttle hold
2011-09-25 14:16:35 -07:00
Jason Short
d495e6a9c4
turned off Stabilize_I by default because it was hurting loiter
...
tweaked speed control of rate_nav
2011-09-24 21:49:45 -07:00
Jason Short
e961d3f3d4
Removed default Rate_I for pitch and roll
...
added change speed control for missions
2011-09-24 09:49:11 -07:00
Jason Short
25b0a3c43b
Added a default, but low throttle cruise value
...
Added a clear integrator for Rate I to prevent tip ups at launch.
2011-09-22 23:10:55 -07:00
Jason Short
7177bcec77
removed old CH6 tuning defines
2011-09-22 18:51:41 -07:00
Jason Short
cfd2c31fb2
Better Tuning for default Quad
2011-09-22 18:30:29 -07:00
Jason Short
991279851a
Refined Throttle Timer reset
...
Reduced Loiter I gain to decrease overshoot.
2011-09-22 17:38:39 -07:00
Jason Short
078f64e276
Fixed Throttle integrator bug. Time was not being reset causing a big drop in throttle control.
2011-09-22 12:28:46 -07:00
Jason Short
73fd0084be
Added Piezo Support, code from Oliver.
2011-09-18 17:12:28 -07:00
Jason Short
f79b8de5e8
removed DCM reference from OPT FLOW
2011-09-16 19:17:50 -07:00
Jason Short
b948e0f02b
Lowered Loiter_I - higher value didn't test well.
2011-09-16 18:24:42 -07:00
Jason Short
129c13e065
Fixed CIRCLE mode trig error
...
made loiter_radius * 100 in Params
updated gains
2011-09-16 16:54:45 -07:00
Jason Short
8d0a2fae9b
cleanup
...
added more ifdef for optflow
2011-09-15 23:41:15 -07:00
Jason Short
d29cfbcee3
Integration of optical flow
...
bug fixes for new Simple mode
increased Baro filter by 2 fields
2011-09-15 23:33:00 -07:00
Jason Short
1ce2308d11
Removed Simple Mode
...
Added Simple option to mode switch positions
removed unused OptFlow code
added reset lat and lon error
removed unused init_auto
Fixed log formatting
Added simple mode bitmask
removed pitchmax
added CLI setup for enabling Simple mode to any switch position
2011-09-14 13:58:18 -07:00
Jason Short
c15b6be83f
increased imax
2011-09-11 20:28:43 -07:00
Jason Short
d733868fea
Fixed Yaw mode for CIRCLE
2011-09-11 11:48:11 -07:00
Jason Short
02bfd43390
Fixes Alt hold mistake
...
Moves tuning into runtime definable param
Added more IMax to throttle
Signed-off-by: Jason Short <jasonshort@gmail.com>
2011-09-10 15:16:51 -07:00
Andrew Tridgell
1456a2a912
renamed top level directories
...
ArduCopterMega -> ArduCopter
added archives directory for old code
2011-09-09 11:27:41 +10:00