Andrew Tridgell
|
f2c9b3ac06
|
hwdef: save flash to get 4.3.3 building on some low flash boards
|
2023-01-10 10:14:12 +09:00 |
Andy Piper
|
bd506117f2
|
AP_HAL_ChibiOS: support for MambaF405-2022B
Co-authored-by: vidmantas zemleris <vidmantas.zemleris@gmail.com>
|
2023-01-10 10:14:12 +09:00 |
Andy Piper
|
2a8c6cace0
|
AP_HAL_ChibiOS: MambaH743 v2 with dual ICM42688
|
2023-01-10 10:14:12 +09:00 |
Andy Piper
|
2daf595537
|
AP_HAL_ChibiOS: add UART baudrate accessor
|
2023-01-10 10:14:12 +09:00 |
Kirill Shilov
|
fe2f5acff6
|
AIRLink hwdef: added heater parameters
|
2023-01-10 10:14:12 +09:00 |
bugobliterator
|
77cb12772d
|
AP_HAL_ChibiOS: swap order of ICM20602 and ICM20948_ext on CubeYellow
|
2023-01-10 10:14:12 +09:00 |
bugobliterator
|
0d2a83d1d8
|
AP_HAL_ChibiOS: enable fast fifo reset for CubeYellow as well
|
2023-01-10 10:14:12 +09:00 |
bugobliterator
|
8f79452093
|
AP_HAL_ChibiOS: enable fast reset on ICM20602 for CubeOrange HW
|
2023-01-10 10:14:12 +09:00 |
Kirill Shilov
|
17e21fed22
|
AIRLink: added LTE module enable pin to hwdef
|
2023-01-10 10:14:11 +09:00 |
xiao
|
7cdb15d2a7
|
AP_HAL_ChibiOS: added PixPilot-V6
|
2023-01-10 10:14:10 +09:00 |
Andy Piper
|
667d0cf73f
|
AP_HAL_ChibiOS: increase SPI clock for ICM42688 on CUAV-Nora
use regular speed for ICM42688 CS on Nora
|
2023-01-10 10:14:10 +09:00 |
Andy Piper
|
f0c591eb18
|
AP_HAL_ChibiOS: hwdef for bdshot version of CUAV Nora/Nora+
|
2023-01-10 10:14:10 +09:00 |
bugobliterator
|
8afb879964
|
AP_HAL_ChibiOS: make EKF running on second IMU primary
|
2022-12-10 10:38:07 +09:00 |
Andrew Tridgell
|
41c30b995a
|
hwdef: save flash space on boards that are over
|
2022-12-10 10:38:07 +09:00 |
Andrew Tridgell
|
19a1325480
|
hwdef: use only USB for bootloader on MatekF405-Wing
the bootloader doesn't fit in flash with UARTs as well
|
2022-12-10 10:38:06 +09:00 |
Andrew Tridgell
|
b3b4506279
|
hwdef: stop defining STORAGE_FLASH_PAGE in hwdef-bl.dat
this should only be in hwdef.dat, so we don't have it in 2 places
|
2022-12-10 10:38:06 +09:00 |
Andrew Tridgell
|
2a40e85356
|
HAL_ChibiOS: fixed a bug in processing STORAGE_FLASH_PAGE
when we look in hwdef.dat for STORAGE_FLASH_PAGE we need to recurse
into includes, or we may miss it
|
2022-12-10 10:38:06 +09:00 |
Andy Piper
|
e7ba5d6406
|
AP_HAL_ChibiOS: hwdef for SpeedyBee F405 v3
|
2022-11-21 18:48:49 +09:00 |
Andy Piper
|
afb05fee7b
|
AP_HAL_ChibiOS: support 8 bi-directional dshot channels on MatekH743
|
2022-11-21 18:48:49 +09:00 |
Andy Piper
|
d9259d8362
|
AP_HAL_ChibiOS: correctly default SERIAL7 to RCIN and SERIAL5 to ESC telem on MatekH743-bdshot
|
2022-11-21 18:48:49 +09:00 |
Andrew Tridgell
|
c3f008c4c3
|
HAL_ChibiOS: fixed BRD_SAFETY_MASK on some boards
for boards that have an IOMCU but also have a safety button on the FMU
this fixes the BRD_SAFETY_MASK
|
2022-11-21 18:48:49 +09:00 |
alexklimaj
|
603cb3be69
|
hwdef: ARKV6X
|
2022-11-21 18:48:49 +09:00 |
Andrew Tridgell
|
973bc41cfa
|
HAL_ChibiOS: fixed build error with gcc 11.3
|
2022-10-24 22:23:43 +09:00 |
Andrew Tridgell
|
a258a40681
|
hwdef: added warning messages about flash size
|
2022-10-14 17:13:21 +09:00 |
Andrew Tridgell
|
d3e4cc59b0
|
HAL_ChibiOS: make check_limit_flash_1M() available in main firmware
|
2022-10-14 17:13:21 +09:00 |
Kirill Shilov
|
18970613f9
|
hwdef: AIRLink: USART2 enabled in hwdef
|
2022-10-04 16:50:15 +09:00 |
Andrew Tridgell
|
98d2775a72
|
hwdef: reduce flash usage to allow build
|
2022-10-04 16:50:15 +09:00 |
Yuri
|
48d3cdbfe6
|
AP_HAL_ChibiOS: define skyviper short board names
|
2022-10-04 16:50:15 +09:00 |
Yuri
|
e84eda5317
|
AP_HAL_ChibiOS: define CubeOrange-SimOnHardWare short board name
|
2022-10-04 16:50:15 +09:00 |
Yuri
|
9b6e670c82
|
AP_HAL_ChibiOS: increase short board names to 23 chars
|
2022-10-04 16:50:15 +09:00 |
Andrew Tridgell
|
a036d14a1e
|
hwdef: added CUAV_V6X default parameters
|
2022-10-04 16:50:15 +09:00 |
Andrew Tridgell
|
5c7a2b6369
|
hwdef: reduced memory usage on MatekF405-CAN board
|
2022-10-04 16:50:15 +09:00 |
Andy Piper
|
2c82fb5f38
|
AP_HAL_ChibiOS: make sure SkystarsH7HD has functioning VTX on Camera 1 by default
|
2022-10-04 16:50:15 +09:00 |
Andy Piper
|
f345c21078
|
AP_HAL_ChibiOS: put RX on UART1 on Skystars H7HD bdshot
make sure VTX has power on Skystars H7HD at boot
|
2022-10-04 16:50:15 +09:00 |
Andy Piper
|
4be9377d54
|
AP_HAL_ChibiOS: hwdef for bdshot variant of SkystarsH7HD
Correct bootloader storage location for SkystarsH7HD
|
2022-10-04 16:50:15 +09:00 |
Andrew Tridgell
|
59bfbbe6ae
|
hwdef: rename board at request of vendor
there are multiple AtomRCF405 boards
|
2022-10-04 16:50:15 +09:00 |
Iampete1
|
64d9413871
|
hwdef: Hitec-Airspeed: disable UART to save flash
|
2022-09-11 14:02:18 +10:00 |
Andrew Tridgell
|
a0530a4816
|
hwdef: fixed FlyingmoonF427 servo rail voltage
|
2022-09-11 08:29:12 +10:00 |
Andrew Tridgell
|
dd89d68107
|
hwdef: added AtomRC F405 board
|
2022-09-09 07:14:51 +10:00 |
Andy Piper
|
d82ba1b7a3
|
AP_HAL_ChibiOS: use faster SPI clock for BMI270 on MambaH743 and KakuteH7v2
|
2022-09-06 09:31:21 +10:00 |
AerofoxTech
|
b9b158216b
|
hwdef: add AeroFox Airspeed periph
|
2022-09-05 12:36:11 +10:00 |
Andrew Tridgell
|
f8b1169165
|
HAL_ChibiOS: rename ecc_raw to apsec_data
|
2022-09-05 12:35:37 +10:00 |
Andrew Tridgell
|
f899a47429
|
HAL_ChibiOS: removed debug msg
|
2022-09-05 12:35:37 +10:00 |
Andrew Tridgell
|
30ed94c73c
|
hwdef: disable UARTS in MatekL431 bootloader
this saves a lot of flash, and UARTs are not needed in the
bootloader. It means we can fit a bootloader with signing for ESC
based RemoteID support
|
2022-09-05 12:35:37 +10:00 |
Andrew Tridgell
|
b74c9b5862
|
HAL_ChibiOS: protect against flashing bootloader without public keys
|
2022-09-05 12:35:37 +10:00 |
Andrew Tridgell
|
d7710e5ccf
|
HAL_ChibiOS: make it easy to debug secure boot on Nucleo-G491
|
2022-08-31 10:14:25 +10:00 |
Andrew Tridgell
|
b808351f2a
|
hwdef: enable DFU on some boards
|
2022-08-30 10:51:06 +10:00 |
bugobliterator
|
eb116849c6
|
AP_HAL_ChibiOS: add LED Bootloader in CubeOrange and related boards
|
2022-08-30 10:51:06 +10:00 |
bugobliterator
|
0c78f8bac2
|
AP_HAL_ChibiOS: add support for booting into DFU
|
2022-08-30 10:51:06 +10:00 |
Henry Wurzburg
|
d420ba0edd
|
HWDEF: correct default params file and readme for SPR H7
|
2022-08-30 10:27:25 +10:00 |