Iampete1
50eaa1cc54
Plane: move acro stabilization into mode acro
2023-02-21 11:27:24 +11:00
Iampete1
6bb0096b9d
Plane: move training stabilize function to training mode
2023-02-21 11:27:24 +11:00
Andrew Tridgell
312d37306e
Plane: ensure home is up to date on arming
...
remove any discrepancy which has crept in over the last few seconds
this also ensures that relative_altitude is updated, and copes with
the EKF refusing the resetHeightDatum call
2023-02-19 10:45:42 +11:00
Andrew Tridgell
99f997161a
Plane: holdoff auto takeoff till rudder neutral
...
when arming with rudder we need to hold off the takeoff until the user
has released the rudder stick or we can yaw badly during the takeoff
2023-02-09 07:02:32 +11:00
Andrew Tridgell
2989e2deba
Plane: added support for NAV_PACKAGE_PLACE mission item
...
this works in conjunction with a lua script to allow for a wide
variety of package place options
2023-02-09 07:02:12 +11:00
Peter Barker
648a13d3f7
ArduPlane: add and use AP_ADVANCEDFAILSAFE_ENABLED
2023-02-08 19:00:13 +11:00
Andrew Tridgell
7735614634
Plane: implement set_rudder_offset()
2023-02-08 16:25:39 +11:00
Iampete1
d928e8b002
Plane: stop passing speed_scaler all over the place
2023-02-07 10:17:09 +11:00
Peter Barker
f0e17957f4
ArduPlane: avoid using struct Location
...
clang reports this could be a problem when compiling under some EABIs. Remove it from most places as it is just noise, replace with class where we want to avoid including Location.h
2023-02-04 22:51:54 +11:00
Henry Wurzburg
10b69e1c1f
Plane:expand yaw autotune to other modes
2023-01-31 10:02:16 +11:00
Iampete1
76a10d9b26
Plane: relative_ground_altitude allow passing bool for terrain use
2023-01-25 19:34:53 +11:00
Peter Barker
9edac79db8
ArduPlane: use relay singleton in Parachute
2023-01-03 10:19:54 +11:00
Peter Barker
0cf56ea320
ArduPlane: make and use AP_LANDINGGEAR_ENABLED
2022-12-14 18:30:23 +11:00
Peter Barker
de4dda2d17
ArduPlane: change namespace of MultiCopter and FixedWing params
...
this stops the libraries knowing anything about AP_Vehicle
2022-11-09 19:04:37 +11:00
Henry Wurzburg
a84f6b6dee
Plane: added AUTOTUNE_AXES function to normal tune
...
Co-authored-by: Peter Hall
2022-11-08 10:54:36 +11:00
Andrew Tridgell
41fbbd92bc
Plane: zero error on release of sticks
...
this locks the attitude at exactly the stick release position on each
axis
thanks to Adrian Nagy for feedback
2022-11-02 07:55:37 +11:00
Andrew Tridgell
499fe79221
Plane: implement quaternion based ACRO mode
...
when ACRO_LOCKING=2 this implements a quaternion based ACRO
controller, which allows for accurate rolls and knife edge
2022-11-01 15:00:26 +11:00
Andrew Tridgell
500ac9b99c
Plane: cleanup abort of NAV_SCRIPT
...
use the same enable flag for tricks and auto NAV_SCRIPT_TIME and
ensure we disable if the script stops controlling
2022-10-29 21:22:29 +11:00
Andrew Tridgell
90459ed6f4
Plane: two more arguments to NAV_SCRIPT_TIME
2022-10-23 18:11:15 +11:00
khanasif786
1fe6d77eeb
Plane: Max altitude for FBWB using Fence altitude
2022-10-19 18:28:52 +11:00
Andrew Tridgell
1c043bde9a
Plane: log TECS target alt
...
log the target alt we pass into TECS to help debug a CRUISE height
issue
2022-10-18 06:49:46 +11:00
Peter Barker
9e0894c93a
ArduPlane: add AP_GRIPPER_ENABLED
2022-10-04 10:58:34 +11:00
yaapu
e958c313a1
ArduPlane: fixed roll and pitch for OSD VTOL view
2022-09-27 10:04:10 +10:00
Peter Barker
dabf78c61f
ArduPlane: add and use AP_CAMERA_ENABLED
2022-09-21 11:58:38 +10:00
Peter Barker
e596f7ce83
Plane: add and use AP_RPM_ENABLED
2022-09-20 09:28:27 +10:00
Peter Barker
81c138e0a4
Plane: remove logging of CMDI
...
This is a duplicate of the data logged into "MAVC"
2022-09-14 17:44:50 +10:00
Peter Barker
0d19d7646f
ArduPlane: rename OpticalFlow class to AP_OpticalFlow
...
Brings us in-line with other classes in ArduPilot.
Removes ambiguity with AP_HAL::OpticalFlow which can cause compilation errors as we start to make code more portable across targets
2022-08-18 14:24:01 +10:00
Iampete1
2b0492e6aa
Plane: disalow mode change during fence recovery if option is set
2022-08-17 17:21:30 +10:00
Joshua Henderson
a9da91bc8d
Plane: add TECS Logbitmask to TECS constructor
2022-08-09 09:44:50 +10:00
Henry Wurzburg
fcf29539de
Plane: fix attitude/AOA logging and rates
2022-08-02 10:52:52 +10:00
Iampete1
a592f76282
ArduPlane: change AC_FENCE to AP_FENCE_ENABLED
2022-07-27 19:04:56 +10:00
Iampete1
2b8958f931
Plane: Fence moved to vehicle
2022-07-27 19:04:56 +10:00
Iampete1
dd2221338b
Plane: fence: do not re-trigger if mode change for expected reason
2022-07-19 09:44:36 +10:00
Iampete1
90f2bf3ba2
Plane: remove duplicate last mode reason
2022-07-19 09:44:36 +10:00
Andrew Tridgell
3385d3ae62
Plane: support NAV_DELAY in plane
...
allow for delayed takeoff, and takeoff at a particular time (for swarm
takeoff)
also check for takeoff command in landing sequence arming check
this allows for takeoff->land->disarm->delay->arm->takeoff->land
missions
2022-07-12 10:34:26 +10:00
Andrew Tridgell
15084cb6f3
Plane: moved harmonic notch update code to AP_Vehicle
2022-04-19 09:39:03 +10:00
Andrew Tridgell
c1d841dd93
Plane: support two full harmonic notch filters
2022-04-19 09:39:03 +10:00
Peter Barker
2784f8fa7f
Plane: remove persistent guided_WP_loc state
...
So instead of updating plane.guided_WP_loc and then calling
set_guided_WP(void) to copy that state into plane.next_WP_loc we pass
the new location in the call to set_guided_WP(const Location &loc).
avoidance was the only place which was not entirely over-writing
plane.guided_WP_loc. However, plane.next_WP_loc was updated to be the
current location when we entered guided mode. If we update the
horizontal/vertical avoidance now it is relative to the current
location, not the guided wp location, which could be quite important.
2022-03-22 10:14:40 +11:00
Peter Barker
1f5165349e
Plane: correct compilation when airspeed disabled
2022-03-20 21:47:05 +11:00
Andrew Tridgell
3fe9a55269
Plane: added APIs for lua ship landing
2022-03-10 07:34:20 +11:00
Andrew Tridgell
c54fb0f51b
Plane: link in AP_Follow
...
ready for ship landing
2022-03-10 07:34:20 +11:00
Peter Barker
e1314cc297
Plane: remove ancient convert_mixers
2022-02-08 12:19:55 +11:00
Peter Barker
4068d57930
Plane: correct spelling of mode_lotier_qland
2022-02-08 12:19:03 +11:00
Peter Barker
7c0b1f46d6
Plane: remove logging of STRT message
...
SType is always 3 - and we're just about to log the entire
mission so CTOT is pointless
2022-02-08 12:18:16 +11:00
Henry Wurzburg
e82ad1ec24
ArduPlane: fix error in Tricks on a Switch qualifier
2022-02-08 11:54:38 +11:00
Peter Barker
bab79d0094
ArduPlane: stop passing mission in Terrain constructor
...
Terrain can use the mission singleton
This means Copter can have terrain while compiling mission out
2022-02-08 11:20:20 +11:00
Henry Wurzburg
ea9d35c99d
ArduPlane: extend nav_scripting to all modes
2022-02-07 21:19:28 +11:00
Iampete1
f725f7bb7e
Plane: set new slew limit and inherit slew limt for flaps
2022-01-25 10:12:13 +11:00
Joshua Henderson
c1abcfb7c4
Plane: move Airspeed to AP_Vehicle
2022-01-19 18:21:32 +11:00
Peter Barker
0cf4254290
ArduPlane: move RPM sensor logging into AP_RPM
2022-01-11 11:09:26 +11:00
Iampete1
0fa1ddf7c2
Plane: tailsitter: always give pitch prority elevon mixing in VTOL modes
2022-01-11 10:37:38 +11:00
Andrew Tridgell
fb019eb0f3
Plane: add a low pass filter to speed scaler
...
this is needed due to the filtering done on the target rate in
AC_PID. With a low filter rate in AC_PID a step in the speed scaler
results in a step in the FF output due to the mismatch in the
instantaneous SS and the filtered target rate
2021-12-29 18:36:05 +11:00
Peter Barker
e55eea961f
ArduPlane: create and use AP_OPTICALFLOW_ENABLED
2021-12-29 18:12:03 +11:00
Samuel Tabor
a715472353
Plane: Specify starting location to set_offset_altitude_location
2021-12-27 11:27:52 +11:00
Hwurzburg
274111a5ea
ArduPlane: clean up short failsafe
2021-12-07 10:09:33 +11:00
Andrew Tridgell
e342ce0da4
Plane: fixed reset of steering locked course
...
reset when we have not been steering for 1s, to ensure that an old
locked course is not used
2021-12-04 07:41:35 +11:00
Andrew Tridgell
56870ad7d6
Plane: use yaw rate controller in NAV_SCRIPT_TIME
2021-11-30 16:19:26 +11:00
Hwurzburg
5cafccd447
ArduPlane: fix flare rc switch action with flight option bit 10 active
2021-11-21 21:00:04 +11:00
Peter Barker
70562021ac
ArduPlane: move from ENABLE_SCRIPTING to AP_SCRIPTING_ENABLED
2021-11-15 20:27:40 +11:00
Peter Barker
203103bae5
ArduPlane: ensure ENABLE_SCRIPTING is always defined
2021-11-15 20:27:40 +11:00
Iampete1
b9d240460b
Plane: remove SpdHgt and use TECS direct
2021-11-13 08:05:39 +11:00
Andrew Tridgell
0c1e576544
Plane: added support for NAV_SCRIPT_TIME
2021-11-08 21:08:52 +11:00
Peter Barker
554e7f8d1c
ArduPlane: move EFI to AP_Vehicle
2021-11-05 09:22:17 +11:00
Iampete1
99d98cc5b8
Plane: add transition class as friend
2021-11-02 10:14:36 +11:00
Andrew Tridgell
9c617a18f4
Plane: suppress rate D terms in ground mode
...
this prevents a common oscillation issue on the ground
2021-10-30 18:45:53 +11:00
Hwurzburg
8d94e58ec9
ArduPlane: add RC option to plane for emergency remote landing that forces FS actions to FBWA
2021-10-26 10:34:28 +11:00
Iampete1
2f93c1f9e4
Plane: stabilizer roll and pitch to floats
2021-10-20 18:29:58 +11:00
Iampete1
b31ce6734a
Plane: get throttle input return float
2021-10-20 18:29:58 +11:00
Peter Barker
987d67b867
ArduPlane: move SITL object up to AP_Vehicle
2021-10-19 11:34:43 +11:00
Peter Barker
e1aa863eae
Plane: stop passing current_loc into AP_Camera
2021-09-29 18:33:01 +10:00
Iampete1
682798d044
PLane: support Loiter to Qland battery failsafe action
2021-09-28 09:31:13 +10:00
Iampete1
1148bb1234
Plane: Quadplane: add loiter to alt then QLAND mode
2021-09-28 09:31:13 +10:00
Iampete1
0549e08c5c
Plane: add mehtod to check terrain by mode
2021-09-28 09:31:13 +10:00
Iampete1
dc2ba8236a
Plane: trim_radio: check manual mode and rotation rates and add mesages
2021-09-28 09:16:24 +10:00
Shiv Tyagi
cdb4ec8ad0
Plane : Improved LAND_THEN_NEUTRL to work on all control surfaces
...
This fixes the issue #18593
Co-Authored-By: Peter Hall <33176108+IamPete1@users.noreply.github.com>
2021-09-17 22:06:24 -05:00
Andrew Tridgell
baec0d83f2
Plane: moved accel cal update to vehicle code
2021-09-17 14:07:14 +10:00
Iampete1
c4a1ae42e5
Plane: Quadpalne: move tiltrotor functionality to own class
2021-09-17 08:24:17 +10:00
Iampete1
478bf37246
Plane: used correct WP radius for VTOL flight
2021-09-15 20:36:56 +10:00
Peter Barker
3d34e061fe
ArduPlane: add and use HAL_QUADPLANE_ENABLED
2021-09-14 11:23:18 +10:00
Iampete1
e6968395c6
Plane: remove none-functional NAV_CONTROLLER param
2021-09-08 20:32:52 +09:00
Hwurzburg
327f3a0803
ArduPlane: add option for man throttle center to be TRIM_THROTTLE
2021-09-07 10:02:26 +10:00
Andrew Tridgell
d1d0ab41d6
Plane: added option to log PIDs at full rate
...
useful for tuning quadplanes
2021-08-10 10:13:36 +10:00
Iampete1
a1ecd706b7
Plane: notify buzzer on every mode change
2021-08-10 09:47:33 +10:00
bugobliterator
c8b2f009fd
Plane: change class name from SITL::SITL to SITL::SIM
2021-08-05 07:25:31 +10:00
Peter Barker
cfe25f71e3
ArduPlane: use mission singleton inside AP_AdvancedFailsafe
2021-08-03 10:35:24 +10:00
Hwurzburg
1e4a6c9236
ArduPlane: Correct OSD horizon for VTOL modes and TRIM_PITCH_CD in Fixed Wing
2021-08-03 10:09:28 +10:00
Peter Barker
c1e263695f
Plane: remove unimplemented function declaration
2021-07-30 11:23:06 +10:00
Iampete1
f18428b357
Plane: #ifdef scripting specific functions
2021-07-28 18:18:32 +10:00
Iampete1
0eab3faf32
Plane: use new tailsiter class
2021-07-27 09:08:34 +10:00
Andrew Tridgell
1ae669bb01
Plane: added manual input expo for MANUAL, ACRO and TRAINING
...
this is easier than setting up mode specific expo in radios for flying
in manual modes
2021-07-23 14:47:14 +10:00
Peter Barker
354c1091f8
ArduPlane: stop taking references to ahrs in APM_Control
2021-07-21 18:27:23 +10:00
Peter Barker
055e82276e
ArduPlane: remove HIL support
2021-06-15 09:47:31 +10:00
Andrew Tridgell
3bb840f794
Plane: implement slow descent in QRTL approach
...
this approaches in QRTL at ALT_HOLD_RTL alt, then descends to
Q_RTL_ALT close to the destination
2021-06-05 13:05:30 +10:00
Peter Barker
aa973c5245
ArduPlane: move handling of last-seen-SYSID_MYGCS up to GCS base class
2021-04-07 17:54:21 +10:00
Iampete1
e81dc36ed6
Plane: add option do do a VTOL approach RTL
2021-03-29 11:29:12 +11:00
Peter Barker
a32d45eb04
ArduPlane: remove Log_Write_Performance which is not called anywhere
2021-03-26 16:35:08 +11:00
Iampete1
60d26723ae
Plane: make TERRAIN_FOLLOW at AP_int32 bitmask, per mode option
2021-03-24 10:15:18 +11:00
Hwurzburg
d15e01d390
Plane: fix DO_CHANGE_SPEED airspeed to impact only AUTO and GUIDED modes
2021-03-16 10:09:34 +11:00
James O'Shannessy
5dd40afe0a
ArduPlane: Retrigger fence breach if mode
...
ArduPlane: Move auto enabling code to common fence library
2021-03-05 14:52:46 +11:00
James O'Shannessy
8a99d9dd00
ArduPlane: Use auto enable and auto disable from AC_Fence
2021-03-05 14:52:46 +11:00