Commit Graph

4428 Commits

Author SHA1 Message Date
Andrew Tridgell c13a9961a9 Plane: prepare for 4.3.0beta3 2022-10-14 17:13:21 +09:00
Andrew Tridgell f6198c0137 Plane: release notes for 4.3.0beta3 2022-10-14 17:13:21 +09:00
mattbooker b1dbd13116 Plane: Fixed divide by zero error when transitioning to guided 2022-10-14 17:13:21 +09:00
Andrew Tridgell 6ff6ad7a7f Plane: prepare for 4.3.0beta2 2022-10-14 17:13:21 +09:00
Andrew Tridgell 1051f51fd1 Plane: added release notes for 4.3.0beta2 2022-10-04 16:50:15 +09:00
Michael du Breuil ff249334b6 Plane: Allow reseting target airspeed to the parameter value 2022-10-04 16:50:15 +09:00
yaapu 191a44b471 ArduPlane: fixed roll and pitch for OSD VTOL view 2022-10-04 16:50:15 +09:00
Peter Barker e2a2526506 ArduPlane: do not send MSG_RPM if RPM not enabled 2022-10-04 16:50:15 +09:00
Andrew Tridgell 0c0f23b610 Plane: prepare for 4.3.0beta1 2022-09-13 14:20:02 +09:00
Andrew Tridgell 807d7a5488 Plane: release notes for Plane 4.3.0beta1 2022-09-13 14:20:02 +09:00
Iampete1 84922cba9a Plane: Quadplane: use new motors pre arm 2022-09-07 17:54:16 +10:00
Iampete1 6358a3c962 Plane: add min airspeed arming check and constrain for speed scailing 2022-09-06 09:01:26 +10:00
Iampete1 5a53e22886 Plane: correct extened range airspeed scailing limits 2022-09-04 10:54:41 +10:00
Andrew Tridgell 22cd568a4c Plane: removed use of "blended" earth frame accel 2022-08-21 18:51:59 +10:00
Andrew Tridgell 953b754074 Plane: release notes for 4.2.3 2022-08-21 14:13:11 +10:00
Andrew Tridgell 4894cc1742 Plane: prepare for 4.2.3beta3 2022-08-19 18:44:08 +10:00
Peter Barker 0d19d7646f ArduPlane: rename OpticalFlow class to AP_OpticalFlow
Brings us in-line with other classes in ArduPilot.

Removes ambiguity with AP_HAL::OpticalFlow which can cause compilation errors as we start to make code more portable across targets
2022-08-18 14:24:01 +10:00
Iampete1 2b0492e6aa Plane: disalow mode change during fence recovery if option is set 2022-08-17 17:21:30 +10:00
Iampete1 a8a1e619df Plane: only trigger fence action for new breaches 2022-08-17 17:21:30 +10:00
Iampete1 367984a6b8 Plane: set fence manual recovery on mode change 2022-08-17 17:21:30 +10:00
Mirko Denecke ba13f4d116 ArduPlane: remove unused limit_length calculation in overshoot 2022-08-16 12:05:00 +10:00
Randy Mackay c255b3b5b6 Plane: replace send-mount-status with send-gimbal-device-attitude-status 2022-08-15 20:29:25 -04:00
Peter Barker 3f4a472899 ArduPlane: move call to compass cal update up to AP_Vehicle 2022-08-16 10:06:44 +10:00
Michael du Breuil f183b21fc5 Plane: Support vtol landing options on NAV_VTOL_LAND
This allows the same mission to contain both circular and straight
landing items, and doesn't require on the fly tweaking
2022-08-15 17:05:00 -07:00
Andrew Tridgell 204a8cdc55 Plane: release notes for 4.2.3beta2 2022-08-10 06:09:23 +10:00
Peter Barker 127bf7aa09 ArduPlane: make terrain checks common between Copter and Plane 2022-08-09 14:31:14 +10:00
Andrew Tridgell 2e32c753b9 Plane: added arming check for terrain data 2022-08-09 14:31:14 +10:00
Iampete1 ee778dbd3a Plane: Quadplane: add option_is_set helper for Q_OPTIONS 2022-08-09 13:21:00 +10:00
Henry Wurzburg 905572eff5 ArduPlane: update logging bitmask metadata to new style 2022-08-09 11:38:16 +10:00
Iampete1 821053e580 Plane: Quadplane: allow servo auto trim for motors only tailsitter assist 2022-08-09 10:56:41 +10:00
Joshua Henderson a9da91bc8d Plane: add TECS Logbitmask to TECS constructor 2022-08-09 09:44:50 +10:00
Andrew Tridgell b133e98102 Plane: improve target airspeed in landing approach
if the user hasn't set TECS_LAND_ARSPD then we can use an airspeed
between ARSPD_FBW_MIN and TRIM_ARSPD_CM when on approach

this also fixes landing_desired_closing_velocity() to never go above
the landing target speed, so we don't try to speed up if we are
starting the landing sequence too early
2022-08-03 12:26:57 +10:00
Andrew Tridgell 54280c2ae0 Plane: update release notes for 4.2.3beta1 2022-08-02 18:07:42 +10:00
Henry Wurzburg 7bb947e4b4 Plane: change log bitmask metadata to refer to correct logs 2022-08-02 11:06:53 +10:00
Henry Wurzburg fcf29539de Plane: fix attitude/AOA logging and rates 2022-08-02 10:52:52 +10:00
Andrew Tridgell f9f0f60815 Plane: base yaw in overshoot on target speed not scaled speed
this prevents an oscillating due to the speed changing as we yaw,
resulting in a different yaw target
2022-08-02 07:49:34 +10:00
Andrew Tridgell 3201ecd381 Plane: added an arming check for VTOL land too short
this is meant to catch bad mission setup, especially for UGCS, which
planes waypoints right on top of the landing point
2022-08-02 07:49:34 +10:00
Andrew Tridgell 5bdd43457c Plane: in overshoot allow up to the Q WP speed
this prevents us using too much battery when we are a long way from
the landing point
2022-08-02 07:49:34 +10:00
Andrew Tridgell fa371b92a8 Plane: limit target accel in POSITION1
don't ask for more than 2* transition limit, and reset when we enter
overshoot case
2022-08-02 07:49:34 +10:00
Andrew Tridgell afd21298d5 Plane: adjust target vector for wind in overshoot
at low speeds we want to keep the nose pointed into the wind on
landings
2022-08-02 07:49:34 +10:00
Andrew Tridgell a1e7072cb1 Plane: cope with overshoot in POSITION1 VTOL land state
when we overshoot run a simple position controller that tries to point
the nose at the landing point and aims for the position2 speed
threshold
2022-08-02 07:49:34 +10:00
Iampete1 a592f76282 ArduPlane: change AC_FENCE to AP_FENCE_ENABLED 2022-07-27 19:04:56 +10:00
Iampete1 2b8958f931 Plane: Fence moved to vehicle 2022-07-27 19:04:56 +10:00
Peter Barker b0bee613d4 ArduPlane: add and use AP_ICENGINE_ENABLE 2022-07-22 08:48:16 +10:00
Andrew Tridgell 25e317d6b1 Plane: check G_Dt to catch startup errors
this catches cases where constructors lead to G_Dt being incorrect
2022-07-21 14:21:17 +10:00
Iampete1 7c505ad0ff Plane: set defualt format version 2022-07-20 17:59:59 +10:00
Iampete1 040e08f4b1 Plane: tailsitter: dont check if flying its always true in vtol transtion 2022-07-20 17:40:08 +10:00
Iampete1 98887a984b Plane: FW approach: use abs value for loiter sum check 2022-07-20 17:02:07 +10:00
Iampete1 2bda3c44c6 Plane: FW approach: correct wrap on breakout direction check 2022-07-20 17:02:07 +10:00
Iampete1 2e342d7852 Plane: FW approach: allways use correct loiter direction 2022-07-20 17:02:07 +10:00