Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
5,608 Commits 71 Branches 509 Tags 780 MiB
Commit Graph

416 Commits

Author SHA1 Message Date
rmackay9 a4a2fad798 ArduCopter: more out-of-date commented out code removed 2012-10-17 19:25:14 +09:00
rmackay9 7228236db6 ArduCopter: updated firmware version to 2.7.4-Delta 2012-10-17 10:20:41 +09:00
rmackay9 025cc05cab ArduCopter: update version information ahead of testing 2012-10-15 18:15:38 +09:00
LeonardTHall 4203655646 New Yaw controller using rate feed forward and stabilize. 
Signed-off-by: LeonardTHall <LeonardTHall@gmail.com>
 2012-10-15 11:37:49 +09:00
rmackay9 254fff6acd ArduCopter: fixed acro mode 
Changes included:
Removing earth frame roll_rate_trim, pitch_rate_trim and yaw_rate_trim.
Switch ACRO mode to use YAW_ACRO instead of YAW_HOLD.
Changed YAW_ACRO to use stabilize yaw when axis_enabled.
Reset ACRO roll, pitch and yaw targets to current attitude when first entering ACRO.
 2012-10-14 17:47:46 +09:00
rmackay9 9052b4152b ArduCopter: remove unnecessary (probably slightly harmful) extra barometer read 
The barometer reads including reading temperature was all moved to a timer but this extra read (originally to read the temperature) was probably forgotten.
 2012-10-11 18:31:10 +09:00
rmackay9 b5c1e23549 ArduCopter: changed sin_pitch and sin_roll to faster equivalents 2012-10-11 17:54:42 +09:00
Andrew Tridgell 2af5ff896d ACM-HIL: fixed optflow declaration 2012-10-11 11:51:25 +11:00
Pat Hickey 74d5b1b841 ArduCopter: Provide AP_Semaphore instance for SPI3 bus on APM2. 2012-10-09 11:39:39 -07:00
rmackay9 0050232ae2 ArduCopter: failsafe added to shutdown motors if mainloop fails 2012-10-09 12:30:17 +09:00
rmackay9 ae05bc62f6 ArduCopter: added AP_Semaphore to list of includes 2012-10-06 12:41:58 +09:00
rmackay9 a35543bf96 ArduCopter: prioritise rate controllers, rate controller targets converted to body frame 2012-10-03 14:10:31 +09:00
rmackay9 fc4f4d76c9 ArduCopter: allow DMP to run in parallel with DCM 
Parallel DMP can be enabled by #define SECONDARY_DMP_ENABLED in APM_Config.h
New DMP dataflash log type added to allow easy comparison with DCM
 2012-09-30 00:25:40 +09:00
rmackay9 4bca609b9f AP_InertialSensor_MPU6000: replaced _cs_pin parameter with #define and saved 1 byte of memory 
Updated ArduCopter, ArduPlane and example sketches in AP_InertialSensor, AP_IMU and AP_AHRS libraries because they no longer need to pass in cs_pin to the constructor
 2012-09-28 19:21:59 +09:00
rmackay9 ebbf8dc6be ArduCopter: updated version to 2.7.4-Beta 2012-09-25 23:39:15 +09:00
rmackay9 090a672636 ArduCopter: optical flow initialisation changes now that optical flow library automatically works on APM1, APM2 and APM2.5 2012-09-24 18:39:33 +09:00
rmackay9 aaab3c08aa ArduCopter: added throttle curve (although disabled by default) for all multicopters 2012-09-18 23:05:08 +09:00
Andrew Tridgell 14d19ac33d ACM: updates for new GPS detection 
a GPS can now be attached after startup
 2012-09-17 14:45:47 +10:00
rmackay9 9965dd8b1a HIL: changes to fix HIL for ArduCopter after recent timing changes. 
Changes include using AP_PeriodicProcess and calling imu.init even in HIL mode
 2012-09-15 18:42:56 +09:00
rmackay9 54d07f6d04 ArduCopter: removed INSTANT_PWM from ArduCopter and AP_Motors library 2012-09-13 21:31:13 +09:00
Jason Short b56dc44e61 ACM : Fix enduf 2012-09-10 21:25:53 -07:00
Jason Short 24f80c632c ACM : forced setup_show to dump params during log dump for better analysis. 2012-09-10 20:52:30 -07:00
Jason Short 65dc4ccc6d ACM : Added centralized Iterm logging at a lower rate. Logs all iterms. 2012-09-10 20:26:48 -07:00
Andrew Tridgell ea78121f1b ACM: use spare CPU cycles to read the magnetometer 2012-09-10 11:38:18 +09:00
rmackay9 7a0189fb2c ArduCopter: modified mainloop timing to be in sync with the arrival of new data from the IMU. 
This reduces the maximum delay between when new sensor data arrives and when it is actually used by about 5ms.
 2012-09-10 11:37:53 +09:00
Andrew Tridgell 1fecd135ef ACM: use compass.accumulate() in ArduCopter 
this gives us a much less noisy magnetometer
 2012-09-08 10:06:04 +10:00
rmackay9 af2502c739 ArduCopter: upgraded firmware version to 2.7.3 2012-09-02 12:58:16 +09:00
rmackay9 3e6966c33d ArduCopter: fixes to allow AP_Mount to work on APM1 with original default channels and fix to reenable support for 3-axis gimbals on APM2. 
Channels 5 to 11 changed to RC_Channel_aux.
Removed channel 9 because APM_RC doesn't support it in any case.
Updated EEPROM format version to 119 because of the change to RC_Channel_aux and because k_param_rc_11 moved to be after k_param_rc_10.
 2012-09-02 12:51:23 +09:00
Craig Elder c83d1402fb Arducopter: Release 2.7.2 2012-08-31 19:18:10 -07:00
Jason Short 91bc3705c1 ACM : revert back to the 2.6 climb rate calc 
The current filter is outputting wild oscillations.
 2012-08-28 21:22:07 -07:00
Craig Elder 94957b3529 Arducopter: Preparing for 2.7.2 Release 2012-08-28 18:30:41 -07:00
Jason Short 52def45ba0 ACM: Altitude Adjust 2012-08-28 15:40:08 -07:00
Jason Short 24486c75b5 ACM : Log Timing 2012-08-28 15:40:08 -07:00
uncrustify e4932136d9 uncrustify ArduCopter/ArduCopter.pde 2012-08-21 19:19:50 -07:00
Andrew Tridgell bd6581c523 AHRS: removed Quaternion build support from APM/ACM/rover 2012-08-22 10:42:21 +10:00
Andrew Tridgell 85e8ba7993 ACM: fixed TradHeli build 2012-08-22 09:55:31 +10:00
Robert Lefebvre e1d6103045 TradHeli: Creating Flybar Acro mode. 2012-08-21 16:54:01 -04:00
rmackay9 1dd8606b17 ArduCopter: changed reset_throttle_counter to uint8_t to get rid of overflow bug that was preventing target altitude from being locked in after pilot input down throttle. 2012-08-19 11:50:35 +09:00
Jason Short 123545f679 ACM : Alt hold adjustment - made angle boost work during alt hold changes. 
increased length of delay when reverting to automatic hold to deal with latency of baro sensor
 2012-08-18 09:30:46 -07:00
rmackay9 7a31e4e660 ArduCopter: modified altitude hold so that 1 second slow down period is executed after pilot moves throttle back into deadzone 2012-08-18 21:45:49 +09:00
Jason Short cbf4870b00 ACM : Made control_roll and pitch global for logging; made yaw towards waypoint use initial angle and not a recalculated angle to deal with wiggles as we approach WP 2012-08-16 15:39:50 -07:00
rmackay9 48b7d26c5d ArduCopter: changed all "int" to "int16_t" and a few "long"s to "int32_t". 
Also moved "simple_counter" variable from global scope to the "update_simple_mode" function which is the only place that it's actually used.
 2012-08-16 20:04:46 +09:00
Jason Short cbd4661b96 ACM: Added a filtered version of Location for GPS lag. 
I did this because when you are close to a WP the Yaw angle can go a bit wacky as the location jumps around. The filtered loc is only used in the wp_distance calculation now.
 2012-08-14 14:11:51 -07:00
Jason Short ba6ec9ae45 ACM: Revved the version 2012-08-14 14:11:51 -07:00
Jason Short 455cfa4caa ACM: Toy mode updates - added second toy mode 2012-08-11 22:37:27 -07:00
Andrew Tridgell d0709443b4 AHRS: fixed build 
AP_Airspeed.h is now needed to build AHRS
 2012-08-11 12:22:55 +10:00
Jason Short 0688eee9bc ACM : Added larger WP radius for fast waypoints so we don't loose speed angling in on the WP at the last second. 2012-08-10 10:02:32 -07:00
Jason Short 7615c835ee ACM : Arducopter.pde 
command_nav_index upped to in16t for negative number
renamed trim flag > CH7_flag
Added fast_corner var
removed unused alt vars
Alt hold I term update
 2012-08-09 16:59:43 -07:00
Amilcar Lucas 1683f18bff Allow fully independent operation of two AP_Mount instances 2012-08-08 23:11:23 +02:00
Amilcar Lucas f321f5d9c5 Add a second mount instance 2012-08-08 23:07:25 +02:00