Peter Hall
a43db51440
AC_AttitudeControl: add get_att_target_euler_rad function
2021-03-17 08:13:11 +09:00
Habibullah Oladepo
a74ad951de
SRV_Channel: fix servo output function documentation typo
2021-03-17 08:54:13 +11:00
Andrew Tridgell
8a8db85b9c
HAL_ChibiOS: fixed build of f103-trigger fw
2021-03-16 18:28:58 +11:00
Randy Mackay
b873e7fcb0
AP_Mission: read_cmd_from_storage sets all bytes of cmd
...
This resolves a potential valgrind issue caused by some bytes of the cmd not being set
2021-03-16 10:23:40 +09:00
Tatsuya Yamaguchi
2c95093d36
AP_InertialSensor: fix temperature sensor on LSM9DS0
2021-03-16 12:09:19 +11:00
Lava Chemist
4a52f945db
AP_HAL_ChibiOS: Add FlywooF745
2021-03-16 11:27:23 +11:00
murata
3a006ae226
AP_GPS: Supplementary explanation of configuration parameters (NFC)
2021-03-16 10:43:18 +11:00
murata
c5b1c832ba
AP_NavEKF3: Change misnomer (NFC)
2021-03-15 18:21:15 +11:00
murata
24591d68bc
AP_NavEKF2: Change misnomer (NFC)
2021-03-15 18:21:15 +11:00
Hwurzburg
e1bab7374b
AP_Notify: Add calibration indications for EKF temp and compass cal to RGB LED
2021-03-15 09:49:59 +09:00
Peter Barker
4605870788
AP_NavEKF3: remove separate calls to get delta-times for vel and ang
2021-03-13 11:29:29 +11:00
Peter Barker
5dff32422d
AP_NavEKF2: remove separate calls to get delta-times for vel and ang
2021-03-13 11:29:29 +11:00
Peter Barker
5c31238f28
AP_Mount: remove separate calls to get delta-times for vel and ang
2021-03-13 11:29:29 +11:00
Peter Barker
2b0bf45891
AP_InertialSensor: remove separate calls to get delta-times for vel and ang
2021-03-13 11:29:29 +11:00
Peter Barker
a0fcd74b52
AP_DAL: remove separate calls to get delta-times for vel and ang
2021-03-13 11:29:29 +11:00
Peter Barker
ea1884f491
AP_AHRS: remove separate calls to get delta-times for vel and ang
2021-03-13 11:29:29 +11:00
Peter Barker
5123b05b2b
GCS_MAVLink: add support for ATTITUDE_QUATERNION
2021-03-13 09:44:12 +11:00
Siddharth Purohit
edceb4e3a4
AP_GPS: move underscore one layer down for GPS
2021-03-12 16:32:36 +09:00
bugobliterator
49d934eb42
AP_HAL_SITL: add support for multiple periph instances
2021-03-12 16:32:36 +09:00
bugobliterator
0031fee851
AP_GPS: add support for ordering UAVCAN GPS
2021-03-12 16:32:36 +09:00
bugobliterator
67be2ed4ba
AP_Arming: add support for GPS_Backends to spew failure reasons
2021-03-12 16:32:36 +09:00
Michael du Breuil
a3ddf5264d
AP_GPS: Support uavcan ardupilot.gnss.Status
...
Also makes the drive by change to make GPS_Backend::is_configured const
2021-03-12 09:39:55 +11:00
Michael du Breuil
e47857a278
AP_UAVCAN: Add ardupilot.gnss.Status
2021-03-12 09:39:55 +11:00
Hwurzburg
fd9c497232
AP_OSD: Add height above terrain panel and warning
2021-03-11 11:54:47 +11:00
murata
8e8f2b93a7
AP_Motors: Add DECA frame class and type string
2021-03-09 19:59:10 +09:00
Rishabh
e9c0e50185
AP_Proximity: Filter out land detected by sensors
2021-03-09 11:02:26 +09:00
Randy Mackay
fe382e4d10
AP_Mission: minor format fixes
2021-03-09 11:49:42 +11:00
Randy Mackay
3a66b2667b
AP_Mission: correct spelling of interrupted
2021-03-09 11:49:42 +11:00
Rishabh
e09e9b1e6a
AP_Logger: Log raw and filtered distances from proximity lib
2021-03-08 16:33:20 +09:00
Rishabh
044e1850d4
AP_Proximity: Add a low pass filter per face for distances
2021-03-08 16:33:20 +09:00
James O'Shannessy
f028747399
GCS_MAVLink: Remove todo since plane now supports MAV Protocol Capability Mission Fence
2021-03-05 16:48:57 +11:00
James O'Shannessy
43e06e9040
AC_Fence: Fix int32_t overflow with large longitude values
2021-03-05 14:52:46 +11:00
James O'Shannessy
26811ad46d
AP_Landing: Autoenable fence if required when landing was aborted
2021-03-05 14:52:46 +11:00
James O'Shannessy
8ef68c8fb0
AC_Fence: Send text to gcs when fence is auto-enabled
2021-03-05 14:52:46 +11:00
James O'Shannessy
b4bf41c6f9
AC_Fence: Adjustments to default parameters for addition to plane
2021-03-05 14:52:46 +11:00
James O'Shannessy
c316711351
ArduPlane: Add conversion from ArduPlane geofence param to AC_Fence param
2021-03-05 14:52:46 +11:00
James O'Shannessy
254c28f142
AC_Fence: Improve auto enable documentation
2021-03-05 14:52:46 +11:00
James O'Shannessy
b6d29d746b
AC_Fence: Add common auto enable and auto disable
2021-03-05 14:52:46 +11:00
James O'Shannessy
e4f1e26b5c
AC_Fence: Disable fence floor when disabling the rest of the fence
2021-03-05 14:52:46 +11:00
Steven Josefs
c783410494
AC_Fence: adjusted AP_GROUPINFO to contain all copters
2021-03-05 14:52:46 +11:00
Dr.-Ing. Amilcar Do Carmo Lucas
22bdc3e54c
AC_Fence: extend pre-arm checks
...
Fix comments
2021-03-05 14:52:46 +11:00
Dr.-Ing. Amilcar do Carmo Lucas
2e422f249a
AC_Fence: small comment improvements. Do not call the same function four times
2021-03-05 14:52:46 +11:00
Dr.-Ing. Amilcar do Carmo Lucas
15e95be7d7
AC_Fence: do not delete the FENCE_ENABLE parameter. It would confuse many users.
...
Talked to Randy about this. The consensus was not to delete the parameter
2021-03-05 14:52:46 +11:00
James O'Shannessy
783a4b7965
AC_Fence: Change logic to fence enable and sys_status reporting
2021-03-05 14:52:46 +11:00
James O'Shannessy
a23e8d46da
AP_Vehicle: Add additional fence mode change reason
2021-03-05 14:52:46 +11:00
James O'Shannessy
8ca69c2e89
AP_Logger: Add support for fence floor events
2021-03-05 14:52:46 +11:00
James O'Shannessy
c2abf27d78
GCS_MAVLink: Add reporting of fence floor breaches to GCS_MAVLink
...
GCS_MAVLink: Add disabling of fence floor only, per mavlink spec
GCS_MAVLink: Cannot enable a fence if the fence is not present
2021-03-05 14:52:46 +11:00
James O'Shannessy
0e73b7bce1
AP_Arming: Enable and Disable the fence when vehicle is armed/disarmed
...
AP_Arming: Use auto enable flag to arm fence only when armed (as per enum)
AP_Arming: Config defines are not available in AP_Arming
Since config definitions are not available in AP_Arming, we can still rely on singleton access of the AC_Fence object.
AP_Arming: Perform fence checks for all vehicles
2021-03-05 14:52:46 +11:00
James O'Shannessy
87b66b4b49
AC_Fence: Add parameters from Geofence to AC_Fence
...
AC_Fence: Add fence floor breach checks and calculations
AC_Fence: Add event logging to enable/disable of fence floor
AC_Fence: Adjust sys_status reporting to look at total fence count
AC_Fence: Make retrieving of the return point accessible
AC_Fence: Check whether fence is enabled or autoenable is set for arming checks
Checks whether the fence is currently enabled OR if the fence is intended to be enabled automatically.
These checks are used to find out enabled fences, or prearm checks
2021-03-05 14:52:46 +11:00
Paul Riseborough
9b53d505ea
AP_AHRS: Handle airspeed estimation with have_inertial_nav() == false
2021-03-05 12:10:01 +11:00
