Maxim Buzdalov
15d6e664d8
AP_Notify: Fix compilation error in GPIO_LED_1.cpp
2024-08-29 09:37:50 +10:00
bugobliterator
0dbe9ed27f
bootloaders: update PPPGW bootloaders
2024-08-28 18:20:29 +10:00
bugobliterator
8222d65ebe
AP_Bootloader: make Content-Length handle case insensitive
2024-08-28 18:20:29 +10:00
bugobliterator
957e92aca1
AP_HAL_ChibiOS: use CubePilot-CANMod's Serial Order
2024-08-28 18:20:29 +10:00
Henry Wurzburg
e6351b6a41
AP_Notify:correct and expand 1 led flash sequences
2024-08-28 18:19:26 +10:00
George Zogopoulos
bc1e490257
Plane: In transition use TRIM_THROTTLE when TKOFF_THR_MIN==0
2024-08-28 18:18:55 +10:00
George Zogopoulos
6fee0eccad
Plane: Removed all instances of in_back_transition
...
It is not currently used anywhere.
2024-08-28 18:18:55 +10:00
George Zogopoulos
f7d40c0c73
autotest: Added TKOFF_THR_MIN test
2024-08-28 18:18:55 +10:00
George Zogopoulos
3b247a346a
Plane: TKOFF_THR_MIN is applied to SLT transitions
...
Also split in_transition() to forward and backward.
2024-08-28 18:18:55 +10:00
hagerashraf
8d292def15
hwdef: reserve board Ids for DroneBuild boards
...
I added two new boards to the file, with 10 reserved IDs for DroneBuild drones' boards
2024-08-28 16:26:05 +10:00
Henry Wurzburg
4a72373624
AP_GPS:fix metadata typo
2024-08-28 15:31:08 +10:00
Peter Barker
51fe703ce2
mavlink: reference master; GNSS_INTEGRITY message
2024-08-27 16:32:50 +10:00
CRazy
cc182c69e9
AP_Bootloader: ID reserve for HGLRCF405V4
2024-08-27 15:40:02 +10:00
Peter Barker
a8b7513287
Tools: build_options.py: sort IMU into single section
2024-08-27 12:00:47 +10:00
Peter Barker
bd987aa84b
Tools: add build option for batchsampler
...
also create an IMU category to hold IMU-specific options
2024-08-27 12:00:47 +10:00
Henry Wurzburg
1631e85fe8
AP_GPS:add note to old param names to avoid confusion
2024-08-27 12:00:14 +10:00
Peter Barker
c3d89ed9d1
autotest: remove unused parameters from Blimp defaults file
2024-08-27 12:00:03 +10:00
Holden
045059580c
Tools: Translate Linux Mint Wilma to Noble
2024-08-27 11:59:53 +10:00
Iampete1
3c6e5691e4
Filter: LowPassFilter: use calc_lowpass_alpha_dt helper
2024-08-27 11:21:22 +10:00
Iampete1
5453f3a0cc
AP_DroneCAN: register handle_actuator_status_Volz callback and fix logging
2024-08-27 11:18:18 +10:00
Peter Barker
46db6c12c1
SITL: correct use of simulated GPS data
...
Co-authored-by: Andrew Tridgell <andrew@tridgell.net>
uses the elements out of the simulated GPS data "d", rather than going to the parameters in teh simulated GPS "backends".
2024-08-27 11:14:09 +10:00
Peter Barker
b89256bec4
autotest: add test that jamming simulator works
2024-08-27 11:14:09 +10:00
Peter Barker
3c0c2bfa67
AP_Math: add a test for rand_float
2024-08-27 11:09:13 +10:00
Peter Barker
84bcea73e1
AP_Math: correct range of returned value for rand_float on real hardware
2024-08-27 11:09:13 +10:00
Andrew Tridgell
6de6de694a
AP_Math: allow rand_float() on STM32
2024-08-27 11:09:13 +10:00
Peter Barker
ee6bd4fca0
AP_RangeFinder: number enum entries
...
we log these so they should be numbered
2024-08-27 11:05:32 +10:00
Peter Barker
46d37abcf7
Copter: avoid nullptr deref in config_error_loop
...
we may enter the config_error_loop before we call Copter's methods which allocate the wpnav object.
We send mavlink messages in the config error loop, one of which calls this method - so we end up with a nullptr dereference.
We might be able to find a way to stop sending this message in the config error loop, but that's likely to take some time to do....
2024-08-27 11:04:02 +10:00
Wu
a33a0d1579
HAL_ChibiOS: fixed the imu orientation of RadiolinkPIX6
2024-08-27 10:26:50 +10:00
Willian Galvani
4ec023ac1a
Tools: ardupilotwaf: allow automatic upload to BlueOS
2024-08-27 10:25:35 +10:00
Randy Mackay
5bcbf56a47
AP_Mount: Siyi ZT6 set lens fix
...
ZT6 has RGB and Thermal image sensors only
2024-08-27 10:23:47 +10:00
Randy Mackay
0874202aa1
AP_Mount: Siyi ZT6 hardware id fix
2024-08-27 10:23:47 +10:00
Peter Barker
c79ba79ed1
AP_Logger: AllTypes example: freshen output file
2024-08-27 10:19:26 +10:00
Peter Barker
1c15488e35
AP_Common: add comment on top of float16 storage
...
there are multiple standards for storing these values
2024-08-27 10:19:26 +10:00
Peter Barker
b4e3b6cdd5
AP_Logger: add support for logging float16
2024-08-27 10:19:26 +10:00
Peter Barker
4e27c51aa1
AP_NavEKF3: do not log DefaultAirspeed if logging not started
...
if we are not going to use this value ourselves then we certainly should not add it to the replay log
2024-08-27 10:15:10 +10:00
Peter Barker
00dc15063e
AP_NavEKF: avoid copying all but the best element when recalling time-horizon data
2024-08-27 10:07:52 +10:00
Iampete1
44ae148718
Tools: autotest: defualt params: update plane-ice for ICE start stop function
2024-08-27 09:37:34 +10:00
Iampete1
a75a97eb02
Tools: autotest: quadplane: ICE Don't setup ICE start channel its already in model defaults
2024-08-27 09:37:34 +10:00
Iampete1
98d9890bf1
AP_ICEngine: convert from local servo endpoints and rc channel params
2024-08-27 09:37:34 +10:00
Iampete1
f9f9beb858
Plane: add ICEngine start/stop aux function
2024-08-27 09:37:34 +10:00
Iampete1
51963f497b
RC_Channel: add ICEngine start / stop aux function
2024-08-27 09:37:34 +10:00
Iampete1
eee2d2f57e
SRV_Channel: add methods to set defualt and save min/max values
2024-08-27 09:37:34 +10:00
Iampete1
5a3fb37214
Plane: call ICE init
2024-08-27 09:37:34 +10:00
Peter Barker
14e5fd396a
autotest: check altitude in GPSWeightedBlending test
2024-08-27 09:26:06 +10:00
Peter Barker
39b4b80a5f
AP_GPS: create real AP_GPS_Blended backend
2024-08-27 09:26:06 +10:00
Peter Barker
c4fe57d197
autotest: add test for blending while affinity is running
2024-08-27 09:26:06 +10:00
Peter Barker
b9158c0491
autotest: remove unused parameters for quadplane-copter-tailsitter
2024-08-27 08:54:10 +10:00
Peter Barker
c56439b045
autotest: quadplane-cl84: remove old parameter
2024-08-26 20:41:19 +10:00
Peter Barker
a65cd27435
AP_Beacon: allow hwdefs to override number of beacons
...
... also a few other variables.
Also move these out of the main header file as one is internal and the others should go in the ocnfig. in case the values are used elsewhere
2024-08-26 13:48:02 +10:00
Ryan Friedman
284faf08ee
AP_GSOF: Use sparse endian instead of custom code
...
* This saves flash
Signed-off-by: Ryan Friedman <ryanfriedman5410+github@gmail.com>
2024-08-26 13:31:49 +10:00
