Yuri
7592c0c624
AP_HAL_SITL: increase short board names to 23 chars
2022-10-04 13:38:30 +11:00
Andrew Tridgell
53997a284b
AP_HAL_SITL: fixes from --ubsan autotest
2022-09-06 10:49:50 +10:00
Jeffrey Laut
3133aff352
SITL: fix simulated RC failure while receiving RC overrides
2022-09-02 12:08:34 +10:00
Peter Barker
1c7e2f5094
AP_HAL_SITL: correct bind-value SIM_RC_FAIL handling
...
If SITL is not receiving any sitl rc input (so _sitl_rc_in.recv(...) is allways returns -1 then the bind-values code would never be crossed so the RC input values would remain at their initialisation values rather than honouring the SIM_RC_FAIL setting which says they should go to bind values (notably throttle-to-950)
2022-08-10 17:14:21 +10:00
Henry Wurzburg
e682296b58
AP_HAL_SITL: add TeraRange Neo Rangefinder
2022-08-09 09:01:34 +10:00
bugobliterator
8e81ee0292
AP_HAL_SITL: add support for starting node in maintenance mode
2022-07-27 18:18:03 +10:00
Andrew Tridgell
9b0c8674d6
HAL_SITL: catch ubsan errors into a log file
2022-07-12 11:00:08 +10:00
Andrew Tridgell
f55aadfedf
HAL_SITL: fixed undefined behaviour in GPIO
2022-07-12 11:00:08 +10:00
Andy Piper
061ddf7a3f
AP_HAL_SITL: save a sliding window of frequency bins
2022-06-01 15:49:32 +01:00
Iampete1
031115577a
AP_HAL_SITL: enable 32 servo outs
2022-05-22 12:07:37 +10:00
Clyde McQueen
25fd69b947
AP_HAL_SITL: init ArduSub pwm_output to [1500, ...]
...
Signed-off-by: Clyde McQueen <clyde@mcqueen.net>
2022-05-19 07:53:52 +10:00
Andrew Tridgell
7dc5da1247
HAL_SITL: cleanup SITL airspeed handling
...
fixed handling of EAS2TAS, and fixed ratio per sensor.
Removed the wind delay code (which was never being used). We should
add a generic delay filter if we need this again
2022-05-17 19:34:32 +10:00
Andrew Tridgell
a6cd7ffd20
HAL_SITL: fixed warning
2022-05-06 06:55:16 +10:00
Andy Piper
3199412bff
AP_HAL_SITL: add vector addition function
2022-05-04 17:05:51 +10:00
Andy Piper
63229d7eca
AP_HAL_SITL: correct disable channel maths
...
unilaterally write rcoutput to appease the sitl gods
2022-03-29 10:29:31 +11:00
Andrew Tridgell
f8aa4623ef
HAL_SITL: don't use terrain adjustment
2022-03-28 16:01:21 +11:00
bugobliterator
bd2bf7fedc
AP_HAL_SITL: add support for CANFD in SITL
2022-03-27 06:07:34 -07:00
Andrew Tridgell
535d7f0d85
AP_HAL_SITL: removed terrain home correction
2022-03-10 07:34:20 +11:00
Andrew Tridgell
5eb8b8d72e
HAL_SITL: support mavcan message forwarding
2022-02-12 16:36:05 +11:00
Andrew Tridgell
9fd25907e2
HAL_SITL: fixed mapping of --serial ports in SITL
...
uart paths are still in uartABCD order
2022-01-21 10:07:55 +11:00
Peter Barker
ee341bc4eb
SITL: add compilation option AP_SIM_CRSF_ENABLED
2022-01-15 21:56:33 +11:00
Peter Barker
08b8d3ad34
AP_HAL_SITL: correct compilation when SIM options disabled
...
AP_HAL_SITL: use AP_ASIM_GIMBAL_ENABLED
AP_HAL_SITL: use AP_SIM_ADSB_ENABLED
AP_HAL_SITL: use AP_SIM_RPLIDARA2_ENABLED
AP_HAL_SITL: use AP_SIM_PS_LIGHTWARE_SF45B_ENABLED
AP_HAL_SITL: use AP_SIM_PS_TERRARANGERTOWER_ENABLED
AP_HAL_SITL: use AP_SIM_AIS_ENABLED
AP_HAL_SITL: use AP_SIM_JSON_MASTER_ENABLED
2022-01-15 17:37:24 +11:00
Pierre Kancir
6584fef711
AP_HAL_SITL: catch more signal for correct exit
...
SIGINT is for ctrl-c
SIGHUP and SIGQUIT are use within term. If the term close before SITL, it will trigger one of those and then exit cleanly anyway
2022-01-12 12:31:56 +11:00
Shiv Tyagi
af950e266b
AP_HAL_SITL: add dataflash to spi device table
...
We simulate jedec flash for logging. Hence, we need to add dataflash to device table. Also, we need to remove HAL_LOGGING_SITL_ENABLED since we no longer need it
Co-Authored-By: Divyateja Pasupuleti <divyateja2004@gmail.com>
2021-12-25 09:14:31 +11:00
Andy Piper
fa91e74fde
AP_HAL_SITL: remove redundant harmonics from DSP
2021-12-22 18:13:38 +11:00
Peter Barker
fbe46f400f
AP_HAL_SITL: stop passing home_str to _sitl_setup
...
This is poked into the model now
2021-12-13 09:30:33 +11:00
Peter Barker
2f77fef10e
AP_HAL_SITL: permit float-equal while we do comparison vs INFINITY
2021-12-13 08:38:17 +11:00
Peter Barker
acbe567202
AP_HAL_SITL: consolidate rangefinder range calculations
2021-12-11 20:10:10 +11:00
Peter Barker
6e8c7c6b03
AP_HAL_SITL: remove unused mag-data delay buffer state variables
...
This delay buffer code is now in AP_Compass_SITL
2021-12-07 16:41:11 +11:00
Peter Barker
cce14d8461
AP_HAL_SITL: remove unused _home_str member
2021-12-07 09:36:22 +11:00
Peter Barker
8cc7f51de1
AP_HAL_SITL: tidy set/get of hw RTC
2021-12-06 12:58:43 +11:00
Peter Barker
11cbd68296
AP_HAL_SITL: remove incorrect use of ARRAY_SIZE
...
This was converted to a linked list....
2021-11-24 18:26:17 +11:00
Peter Barker
cdccc67fb8
AP_HAL_SITL: make SITL::ADSB a SITL::SerialDevice
2021-11-23 11:09:29 +11:00
Andrew Tridgell
3b3abdeef0
AP_HAL_SITL: support up to 9 UARTs
2021-11-22 22:48:59 +11:00
Peter Barker
eb6da9512f
AP_HAL_SITL: quieten i2c-device-creation diagnostics
2021-11-12 10:17:28 +11:00
bugobliterator
09096cb355
AP_HAL_SITL: add get_storage_ptr method
2021-11-10 17:21:35 +11:00
Peter Barker
9ebd0cdeed
AP_HAL_SITL: use SITL::SerialDevice in place of pipe for communication
2021-11-06 16:54:07 +11:00
Peter Barker
02dc42275c
AP_HAL_SITL: remove unused/unimplemented methods/vars, tidy namespacing
2021-10-28 09:09:44 +11:00
Andrew Tridgell
8192661042
AP_HAL_SITL: rename uLanding simulation to USD1
2021-10-26 15:31:12 +11:00
Peter Barker
cf9bbb570c
AP_HAL_SITL: correct nullptr check on simulated mavlink rangefinder
...
Obvious copy/paste error
2021-10-22 21:46:01 +11:00
Peter Barker
1ab8a3e3aa
AP_HAL_SITL: make simulated GPS work as a SerialDevice
2021-10-21 12:09:21 +11:00
Peter Barker
99e80549b1
SITL: move sitl_gps.cpp to SIM_GPS.cpp
2021-10-21 12:09:21 +11:00
Stephen Dade
1356beb14d
AP_HAL_SITL: Add instance to ADSB simulation
2021-10-20 20:21:33 +11:00
Peter Barker
21030c4e83
AP_HAL_SITL: remove written-only AP::sitl().update_rate_hz
2021-10-20 19:07:17 +11:00
Peter Barker
8c9ade3f7f
AP_HAL_SITL: move simulated megasquirt to SerialDevice framework
2021-10-17 10:00:08 +11:00
Asa Davis
85fbbe0704
SITL: add simulator for LORD Microstrain serial EAHRS
2021-10-17 08:55:03 +11:00
Peter Barker
f5d5387358
AP_HAL_SITL: remove unused ext_fifo_fd member variable
2021-10-12 20:07:19 +11:00
Peter Barker
67226433e3
AP_HAL_SITL: add simulated RAMTRON device
2021-10-12 20:01:49 +11:00
Peter Barker
58a7f022fd
AP_HAL_SITL: add simulated SPI devices
2021-10-12 20:01:49 +11:00
Peter Barker
d98cda12c6
AP_HAL_SITL: remove HIL_MODE vestiges
2021-10-12 08:57:05 +11:00