- TAKEOFF and AUTO flight modes now should have identical takeoff
- Prevent behaviour switching past climb altitude in TAKEOFF mode.
- Refactor set_pitch_min/max methods.
Max was already there, now renamed.
Min is newly introduced.
behaviour.
- Remove enforcement of min takeoff throttle logic from servos.cpp.
It is now handled only by takeoff.cpp.
- Take TKOFF_LVL_ALT into consideration in AUTO as well.
- Fixed pitch setpoint when TKOFF_ROTATE_SPD>0.
- Roll navigation in mode TAKEOFF during climb should now work again.
- Now the TAKEOFF loiter waypoint is set by the bearing of the
aircraft while on TKOFF_LVL_ALT, as in the last stable release, instead
of TKOFF_ALT.
- Using TRIM_THROTTLE in takeoffs, when TKOFF_THR_MIN==0
- Refactor and split set_pitch_max_limit method.
- New _update_pitch_limits to encapsulate all relevant functionality.
- Automatically reset if pitch and throttle are overriden.
- nullified TAKEOFF alt_dem offset on external throttle.
- Simplify use of TKOFF_THR_MIN.
- Prevent takeoff altitude overshoot by capping the altitude setpoint offset.
- Move pitch limits after vertical acceleration limitation.
* We only tested on apt, don't blindly change dev env stuff that's not
tested in CI
Signed-off-by: Ryan Friedman <25047695+Ryanf55@users.noreply.github.com>
this replaces the two booleans used to mediate TX and RX buffer
protection with mutexes.
The booleans were a hangover from the very early HAL_ChibiOS code, and
can lead to a deadlock. The sequence is as follows:
- a very high CAN bus bandwidth usage, triggered by MissionPlanner
requesting CAN_FORWARD on a CAN serial port. That causes a
"infinite" number of CAN_FRAME messages which saturates the bus,
and leads to the DroneCAN thread looping with no pause
- a serial port configured as GPS type AUTO, auto-probing for a GPS
that isn't there. This calls begin() periodically
- the UART TX thread assocated with that UART not making progress as
the TX thread priority is below the DroneCAN thread priority
- this causes the begin() in main thread waiting for _in_tx_timer to
loop forever, which triggers a watchdog
it is clear by inspection that this string can never be empty when the called function returns false. AP_OAPathPlanner::pre_arm_check is not that complicated!
This is also from the older version of the generator.
Note that as documented, some of the equations have been removed and
rearranged slightly as it is assumed their terms are zero. Additionally,
the result is taken as the sum of the diagonal entries of the matrix.
It's from the older version of the generator as well.
Update variable names in the real code to be the same as the generated
code. Skip generation of the unused alternate form of the equations.
Delete `acc_bf_generated.cpp` as we know exactly how to generate it now.
George Zogopoulos
Tarik
Peter Barker
Bayu Laksono
Stephen Dade
Willian Galvani
Ryan Friedman
Ryan Friedman
Andrew Tridgell
Henry Wurzburg
Iampete1
Bob Long
tompsontan
Thomas Watson