Mirror/ardupilot
5
0
Fork 0
mirror of https://github.com/ArduPilot/ardupilot synced 2025-01-11 10:28:29 -04:00
Code Issues Packages Projects Releases Wiki Activity
3,171 Commits 71 Branches 511 Tags 786 MiB
9c26e2369e
Commit Graph

746 Commits

Author SHA1 Message Date
Randy Mackay
f3a95ff3cb Arducopter - Tri - move yaw servo (channel7/motor7/CH_TRI_YAW) to mid point on startup 2012-01-28 10:13:58 +09:00
Randy Mackay
122623f64b OpticalFlow - added OF_LOITER flightmode 2012-01-28 09:27:16 +09:00
Pat Hickey
1dcd50e3be ArduCopter Tri: fix for enable_out of yaw servo, defined yaw servo for APM2 2012-01-27 07:39:01 -08:00
Randy Mackay
8dee001657 Sonar - changed default pin to A0 2012-01-26 22:50:48 +09:00
Pat Hickey
6c03307217 ArduCopter Heli: add motors_output_enable function 2012-01-25 22:41:09 -08:00
Randy Mackay
2c906b7b27 OpticalFlow - replaced PI controller with PID controller. 
Modified optical flow hold to use aggregated position instead of speed.
 2012-01-25 21:55:14 +09:00
Randy Mackay
4434ddf389 Optical flow - updated standard frame rate to 2000hz and increased resolution to 1600cpi 2012-01-25 21:53:20 +09:00
Jason Short
25529dec69 added loiter_d to allow users to configure alternate Loiter alg 2012-01-22 14:19:27 -08:00
Jason Short
74daadb252 Revert "test to switch loiter controls" 
This reverts commit 92270371d038f246d535f0ace9fc19272c44291d.
 2012-01-22 14:19:27 -08:00
Jason Short
6476ba22f2 test to switch loiter controls 2012-01-22 12:28:34 -08:00
Pat Hickey
89e11afc09 ArduCopter: Call APM_RC.enable_out for camera channels in init_camera() 2012-01-22 12:03:11 -08:00
Pat Hickey
98a90d0352 ArduCopter: Call motors_output_enable at correct spot during init 2012-01-22 12:03:11 -08:00
Pat Hickey
04a3112f33 ArduCopter: Add implementation of motors_output_enable to each motors_ frame type 2012-01-22 12:03:11 -08:00
Jason Short
dd1e08a7e0 Causes Aero_SIM to fail 2012-01-22 09:34:43 -08:00
Jason Short
1d9783652a added Beta 4 tag 2012-01-21 22:15:23 -08:00
Jason Short
60e3508f7c converted to cm 
Signed-off-by: Jason Short <jasonshort@mac.com>
 2012-01-21 22:14:08 -08:00
Jason Short
aace39e65c Converted distance gains to CM 
added loiter_d for rate control, equal to old Nav_P gain
 2012-01-21 22:13:57 -08:00
Jason Short
fffa1af3b3 Fixed speed governor which was letting speed get to 0. 
added Loiter_d to replace Nav_P for rate control
wp_distance calc now returns CM
 2012-01-21 22:12:57 -08:00
Jason Short
f638a4b81d recording nav_bearing rather than target bearing 
recording x and y speed rather than Iterms for nav since they are always 0 now
 2012-01-21 22:10:28 -08:00
Jason Short
2fa24e0557 added conversions of CM to M 2012-01-21 22:09:39 -08:00
Jason Short
7edd16e5fe Added Loiter_D to replace Nav_P for better separation of loiter and navigation tuning. 
Upped Nav_P defaults to 3 based on windy flight testing
Added minimum WP speed define of 1m/s
Upped loiter_I for better wind performance - was not seeing any overshoot in logs
Made Nav_I default of 0, since we are not using it in the code.
 2012-01-21 22:09:13 -08:00
Jason Short
59d1f225d5 convert command into CM from M 
Making Landing boost be one at minimum to trigger better navthrottle output
 2012-01-21 22:06:35 -08:00
Jason Short
f3cc1121aa better default for speed governer 2012-01-21 22:05:48 -08:00
Jason Short
5cc19bbe7c slightly less filtering for less latency 2012-01-21 22:04:54 -08:00
Jason Short
9003b95499 Converted to cm for distance 2012-01-21 22:04:35 -08:00
Jason Short
8cb645f3c2 increasing the velocity near WP 2012-01-21 11:59:49 -08:00
Jason Short
1aa6d0ea08 limiting the pitch throttle compensation 2012-01-21 11:59:49 -08:00
Jason Short
ab5716c42d Calc error for logs 2012-01-21 11:59:49 -08:00
Jason Short
7c25253422 Enabled auto throttle hold 2012-01-20 22:52:31 -08:00
Jason Short
7fb641ab77 added note 2012-01-20 22:52:31 -08:00
Jason Short
fb72ecd4e4 formatting 2012-01-20 22:52:31 -08:00
Jason Short
127544b833 Added cast for comparison 2012-01-20 22:52:30 -08:00
Jason Short
42b1362bba cleanup 2012-01-20 22:52:30 -08:00
Jason Short
5ac26a5500 error on comparison operator 2012-01-20 22:52:30 -08:00
Jason Short
5180592913 Added Auto_land_timeout to params 2012-01-20 22:52:30 -08:00
Jason Short
c190f83bb0 AutoLanding timeout for Mission Planner 2012-01-20 22:52:30 -08:00
Jason Short
a22596fb33 Max throttle output was to high 2012-01-20 22:52:30 -08:00
Jason Short
19053bb725 Updated Firmware version 2012-01-20 22:52:30 -08:00
Jason Short
f5fd3a0597 reset all I terms at Arming 2012-01-20 22:52:30 -08:00
Jason Short
287ffb5fb4 enabled Mavlink Land command 2012-01-20 22:52:30 -08:00
Jason Short
6784989e83 relocated reset_I term functions to central location 2012-01-20 22:52:30 -08:00
Jason Short
d2c78d2b75 Stab_D changes units with the new dampening controller updates 
Stabilize roll is raised to .1 - Flies great, and avoids a slow oscillation that could be affecting loiter.
Loiter P lowered to 1.5 based on feedback
 2012-01-20 22:52:30 -08:00
Jason Short
932869b686 renamed function 2012-01-20 22:52:30 -08:00
Jason Short
43365fe802 Verify land updates from JLN 
Effectively a throttle control for landing that mimics a person lowering the throttle.
 2012-01-20 22:52:29 -08:00
Jason Short
ed32ad30fd Refined the D term for stabilize 
moved all the rest_I terms from code into 1 central place
 2012-01-20 22:52:29 -08:00
Jason Short
5141534ea9 B3 2012-01-20 22:52:29 -08:00
Jason Short
db6db1ab91 set dampening range from 0 - .08 from 0 to .6. The new dampening code has changed units. 
added the ability to force nav_throttle so we  don't get ground effects screwing up baro sensor.
Added more descriptive Rest_I functions
 2012-01-20 22:52:29 -08:00
Jason Short
6e94b21d67 Altitude no longer resets when moving loiter WP 2012-01-20 22:52:29 -08:00
Jason Short
85f10589b2 slowed down slightly 2012-01-20 22:52:29 -08:00
Jason Short
017364fc5b Lowered range to more sensible values 2012-01-20 22:52:29 -08:00