Commit Graph

14732 Commits

Author SHA1 Message Date
Randy Mackay 99046ebda6 AC_Fence: fix example sketch 2015-01-28 17:15:32 +09:00
Randy Mackay d7f7af8c13 AC_AttControl: fix example sketch 2015-01-28 17:15:32 +09:00
Randy Mackay 51cb7185f2 InertialNav: fix example sketch 2015-01-28 17:15:27 +09:00
Randy Mackay 0480828350 Dataflash: fix example sketch 2015-01-28 16:31:50 +09:00
Randy Mackay eced90f3a7 Tracker: version number and release notes for 0.3 2015-01-28 11:32:47 +09:00
Randy Mackay 18f8ffab6f Copter: remove land detector bar climb rate definition 2015-01-28 10:59:15 +09:00
Jonathan Challinger 9d585700f8 Copter: remove baro climb rate check from land detector 2015-01-28 10:57:00 +09:00
Kevin Hester 5b5ab01c07 SITL: Don't prompt for vagrant package installs (minor) 2015-01-28 10:52:50 +09:00
Andrew Tridgell 5d8cec23db Plane: update version to 3.2.1beta1 2015-01-27 17:22:13 +11:00
Andrew Tridgell 3123504b38 Plane: start release notes for 3.2.1 2015-01-27 17:22:13 +11:00
Andrew Tridgell b4265cf467 autotest: fixes to quad view for new fg versions 2015-01-27 17:22:13 +11:00
Andrew Tridgell 3d433d2106 AP_Mission: loop check is only needed in one place 2015-01-23 13:48:45 +11:00
Andrew Tridgell 540cadc086 AP_Mission: prevent infinite loop with linked jump commands
this prevents a "jump loop" from causing a firmware lockup. Thanks to
dellarb for reporting this!
2015-01-23 13:14:27 +11:00
Kevin Hester ff4151ef47 SITL: Update install instructions based on Robert's finding 2015-01-23 11:00:09 +09:00
Kevin Hester 4eb2cc0173 SITL: Build JSBsim so that plane sim works in Vagrant 2015-01-23 11:00:06 +09:00
Kevin Hester ad9c3d730c SITL: Numerous improvements to vagrant image and easier SITL for mac/windows
For full instructions/notes see Tools/vagrant/README.md

Notes:
* Old Vagrantfile updated to run faster and self init with our various
build dependancies.
* The sim_vehicle.sh script will now implicitly configure if necessary
* run_in_terminal_window.sh is now smart enough to use Screen sessions.  Or
if those are not available to warn the user but run the command with logging
going to a file in /tmp.
2015-01-23 11:00:04 +09:00
Andrew Tridgell 4ee9575e6d AP_Frsky_Telem: fixed code formatting
match ArduPilot coding standards
2015-01-22 16:49:39 +11:00
Matthias Badaire f59f85d4a4 AP_Frsky_Telem: add SBUS support
add sbus support using a timer on a thread
2015-01-22 16:49:39 +11:00
Matthias Badaire ee00302b62 Plane: Frsky telemtry change move parameter to init of the class
Parameter needs to be passed and use at the init of the class frsky telem
2015-01-22 16:49:39 +11:00
Matthias Badaire a2d71d2811 Copter: Frsky telemtry change move parameter to init of the class
Parameter needs to be passed and use at the init of the class frsky telem
2015-01-22 16:49:39 +11:00
Matthias Badaire ff064e12b1 Rover: Frsky telemtry change move parameter to init of the class
Parameter needs to be passed and use at the init of the class frsky telem
2015-01-22 16:49:39 +11:00
priseborough 5df733a883 AP_NavEKF: Allow flight transition to optical flow mode if GPS is lost 2015-01-22 14:41:04 +09:00
priseborough 04810c012d AP_NavEKF: Increase flow data valid timeout to handle arming delays
When Copter arms, the AHRS/EKF may not be run for a few hundred msec depending on conditions. This can cause the arming check to fail the optical flow sensor and place the EKF in a constant position mode.
2015-01-22 14:41:01 +09:00
priseborough 073b8e7c43 AP_NavEKF: Always explicitly set required const pos or vel mode when arming
This additional explicit setting of the constPosMode and constVelMode reduces the likelihood of logic errors being introduced in the future as it places the intended setting of these parameters at arming in the one place. the constVelmode and constPosMode only have one set of conditions each that can trigger these modes in flight, so if these modes are true after arming it will be clear that it was the in-flight condition that triggered.
2015-01-22 14:40:59 +09:00
priseborough 9c6dabe1cc AP_NavEKF: Add separate flow default parameters for platform types
Also reduces flow measurement noise default for copter only and increases gate to compensate.
2015-01-22 14:40:57 +09:00
priseborough d2da16e652 AP_NavEKF: Consistently set timeout flags whenever aiding is inhibited
This ensures the position and velocity measurement status will be set as timed out immediately after use of those measurements is inhibited. This will improve the timeliness of filter status reporting.
2015-01-22 14:40:55 +09:00
priseborough 824425625c AP_NavEKF: Update public method used to inhibit GPS use
This method is not currently used by any of our vehicle types, but will be required to enable a user selectable 'indoor mode'.
2015-01-22 14:40:52 +09:00
priseborough 1033f5fc1e AP_NavEKF: Apply flow nav vehicle limits regardless of sensor health
It does not make sense to relax the limits on vehicle speed and nav gains just because we have received some invalid flow data. This could make the situation worse if the invalid data was being caused by too much speed.
If we are relying on flow data the vehicle limits should always be applied.
2015-01-22 14:40:50 +09:00
priseborough 14b51f6d74 AP_NavEKF: Unconditionally fuse velocity in constant velocity mode
The zero velocity measurements in this mode are by definition always correct and should never be rejected
2015-01-22 14:40:48 +09:00
priseborough 6663d80176 AP_NavEKF: Simplify nested logic - functionally equivalent
Additional if else statement was unnecessary
2015-01-22 14:40:45 +09:00
priseborough 12c3368c4d AP_NavEKF: Bypass GPS glitch logic when not aiding
When we are not using GPS measurements, we should not be allowing the GPS glitch logic to reset position states as this can interfere with operation of non GPS modes.
2015-01-22 14:40:43 +09:00
priseborough 5c8e71a8d1 AP_NavEKF: Don't reset the position measurement timeout if not aiding
When PV aiding is disabled, then the timeout time reference should not be reset becasue we want the position measurement timeout status to remain true the whole time the measurement is not being used.
2015-01-22 14:40:41 +09:00
priseborough c505a458de AP_NavEKF: Always declare a position measurement timeout if aiding not used
If position and velocity aiding is turned off, then the position measurement should always be reported as timed out.
2015-01-22 14:40:39 +09:00
priseborough 3b166372cc AP_NavEKF: Always declare a velocity measurement timeout if velocity not used
If position and velocity aiding is turned off, then the velocity measurement should always be reported as timed out.
2015-01-22 14:40:36 +09:00
priseborough 95c3197170 AP_NavEKF: Ensure velocity will not be reset unless needed for aiding 2015-01-22 14:40:34 +09:00
priseborough 8aeec82846 AP_NavEKF: Continually turn off aiding whilst the vehicle is disarmed
This prevents the possibility of any logic errors turning aiding back on.

AP_NavEKF: Fix bug in logic
2015-01-22 14:40:31 +09:00
priseborough 81ee339e25 AP_NavEKF: Synchronise non-aiding mode state corrections
Synchronise with covariance prediction to improve numerical stability and accuracy of angle corrections. The 'noise' this produces in the position and velocity estimate is irrelevantbecause these are not used by the control loops during this mode of operation (they are nominally zero anyway).
2015-01-22 14:40:29 +09:00
priseborough ae6b85e63d AP_NavEKF: Explicitly set aiding to off when disarmed
This fixes a bug that could cause the AHRS to drift whilst the vehicle was disarmed depending sensor combinations at startup.
2015-01-22 14:40:27 +09:00
priseborough fb1962b111 AP_NavEKF: Let reported position whilst disarmed show inertial errors
Showing the positon states (which are nominally zero) in addition to the last known offset can provide useful log information.
2015-01-22 14:40:25 +09:00
Randy Mackay d26121036f AutoTest: param file to enable SIM OptFlow 2015-01-22 14:40:23 +09:00
Randy Mackay 1819bd48f4 Copter: remove home_is_set checks from Loiter, PosHold, RTL
This allows these flight modes to potentially operate even when the
vehicle has never had a GPS lock.
Potentially we should replace this with a check that the EKF's origin
has been set
2015-01-22 14:40:19 +09:00
Randy Mackay 01c669ee15 RangeFinder: minor param description update
Also initialise primary instance to 0.
No functional change.
2015-01-22 14:40:16 +09:00
Randy Mackay d49489ca7e Copter: optflow_position_ok requires using EKF 2015-01-22 14:40:13 +09:00
Randy Mackay 01f1ce4cb3 Copter: position_ok false when EKF in const pos mode 2015-01-22 14:40:11 +09:00
Randy Mackay 74ac79ba10 Copter: Drift uses throttle_zero flag 2015-01-22 14:40:08 +09:00
Randy Mackay 02d0b05926 Copter: minor format fix 2015-01-22 14:40:05 +09:00
Randy Mackay 4185d17915 Copter: fix to RTL, PosHold and Loiter's use of filter status 2015-01-22 14:40:02 +09:00
Randy Mackay cc52bbbffb Copter: update current loc once home is set 2015-01-22 14:39:59 +09:00
Randy Mackay f1a6b06586 Copter: remove redundant filter status checks 2015-01-22 14:39:57 +09:00
Randy Mackay 3641d3d508 Copter: send inav velocities in global position message
Also absolute alt now calculated from home alt + current alt above home
instead of using GPS absolute alt
2015-01-22 14:39:54 +09:00