Andrew Tridgell
60a6fed34a
APM_OBC: don't use _saved_wp when zero
2012-08-28 20:18:23 +10:00
Andrew Tridgell
fc942b2ff9
APM: removed reset_I() and instead auto-reset integrator in PID library
...
this prevents us resetting key integrators on waypoint change, while
still preventing old integrators being used when a PID starts to be
used again
2012-08-28 20:18:23 +10:00
Andrew Tridgell
93cde71180
autotest: removed the --wind options
...
SIM_WIND_* options now control wind
2012-08-28 20:18:23 +10:00
Andrew Tridgell
ac2ad44c3c
APM: cleanup throttle suppression code and don't use airspeed to unsupress
...
this removes the throttle suppression when any of the conditions are
met once, as otherwise flying slow below 10m could zero the throttle.
It also removes the use of airspeed for disabling throttle
supression. Otherwise a strong gust of wind can cause ArduPlane to
try to takeoff!
2012-08-28 20:18:23 +10:00
Andrew Tridgell
aaa4e64238
SITL: zero wind for first 15s
...
this allows for airspeed calibration on startup
2012-08-28 20:18:23 +10:00
rmackay9
6f236f0c3b
ArduCopter: increase SPI bus speed to 2Mhz after IMU initialisation has completed (MPU6000 accepts maximum of 1Mhz for some registers but up to 20Mhz for main sensor and interrupt registers)
2012-08-28 17:29:48 +09:00
rmackay9
67252c8a9b
AP_InertialSensor_MPU6000: bug fix. DMP was being enabled by default so although the results were not being used, this caused a delay in the main loop
2012-08-28 17:02:07 +09:00
Craig Elder
a4834b5219
Revert "APM1: Delay serial3 init to not brick Xbee radios"
...
This reverts commit 25d14a9d6a4a1ea60eb78485296298c98c1595d0.
2012-08-27 15:00:23 -07:00
Andrew Tridgell
7a99160ea2
autotest: loiter can be a bit slow to circle sometimes
2012-08-27 13:19:21 +10:00
Andrew Tridgell
5636d311c8
APM-autotest: fixed inside loop test
...
pitch 80 may not be reached due to granularity of the MAVLink logging
2012-08-27 11:45:07 +10:00
Amilcar Lucas
90aa5f2004
ArduPlane: Fix 1280 builds
...
Added fine-granular features in the AP_Mount class to reduce code size on 1280 chips
Remove camera trigger support on 1280 chips
2012-08-27 01:33:45 +02:00
Amilcar Lucas
25916e9a92
Improve comments, no functional changes
2012-08-27 01:32:27 +02:00
Amilcar Lucas
18c8389c26
Improve comment aligment
2012-08-27 00:37:10 +02:00
Michael Oborne
bd180bcd3d
Mission Planner 1.2.9
...
add est distance traveled
add est flight time
AP_Mount now updated
add expermental firmware options.
fix hud avi record framerate
add 2 direction wp circle
tweak gridv2
2012-08-26 12:59:21 +08:00
rmackay9
ccc659e8a9
ArduCopter: reduced Rate Roll and Pitch PID values
...
RATE_ROLL_P, RATE_PITCH_P reduced to 0.165 (was 0.185)
RATE_ROLL_D, RATE_PITCH_D reduced to 0.004 (was 0.008)
2012-08-26 10:45:45 +09:00
Michael Oborne
b9fb1750d5
Mission Planner Cleanup
2012-08-25 21:48:06 +08:00
Andrew Tridgell
7715a2b75f
APM_OBC: ensure pins are setup as outputs
...
constructor is run before parameters are loaded
2012-08-25 17:49:26 +10:00
Andrew Tridgell
a6a583650c
APM: report estimated airspeed if airspeed not available
2012-08-25 17:49:26 +10:00
Andrew Tridgell
2b30561171
APM: use airspeed estimate for speed scaling if available
2012-08-25 17:49:26 +10:00
Andrew Tridgell
9cf8cc590f
APM: added XTRK_USE_WIND parameter
...
when enabled this will use the wind estimation code to adjust the
navigation bearing, allowing the navigation code to cope with much
higher levels of wind while using a compass
2012-08-25 17:49:26 +10:00
Andrew Tridgell
be6f3aed72
AHRS: added airspeed_estimate() function
...
this allows the APM code to use an airspeed estimate for navigation
2012-08-25 17:49:26 +10:00
Andrew Tridgell
b8decb4fd7
SITL: added SIM_WIND_* parameters
...
this allows control of the simulated wind during a flight
2012-08-25 17:49:26 +10:00
Craig Elder
dc60fe5616
APM1: Delay serial3 init to not brick Xbee radios
2012-08-24 17:55:20 -07:00
Andrew Tridgell
f1ba9c08e5
APM: support forcing MANUAL of FBWA mode over MAVLink
2012-08-24 15:18:22 +10:00
Andrew Tridgell
1e6ce649ad
APM: ensure fence_total is positive
...
thanks to David Buzz for the suggestion
2012-08-24 14:56:46 +10:00
Michael Oborne
989b799130
Mission Planner 1.2.8
...
fix mjpeg stream from VLC.
add grid mode V2
fix hdop scaling
2012-08-24 07:51:21 +08:00
Michael Oborne
61277af526
firmware build
2012-08-23 11:40:10 +08:00
Andrew Tridgell
fbbd94118f
APM: fixed wheeled takeoff with Jons new controllers
2012-08-22 17:34:01 +10:00
Andrew Tridgell
517e6b2b9d
APM: prepare for ArduPlane 2.60
2012-08-22 16:28:38 +10:00
Andrew Tridgell
d091311196
APM: removed factor of 0.5 in non-airspeed takeoff pitch
...
this limited the pitch far below the specified target pitch
2012-08-22 16:28:38 +10:00
Andrew Tridgell
487b909189
APM: ensure takeoff_complete is reset
2012-08-22 16:17:55 +10:00
Andrew Tridgell
cf432c0ae0
APM: fixed bug in do_jump() navigation
...
this avoids a problem where the jump can cause the next command to be
reset to 0
2012-08-22 15:29:46 +10:00
Andrew Tridgell
56ada1a69c
APM: added RSSI to RC_CHANNELS_RAW as well
...
and prevent double read
2012-08-22 13:58:25 +10:00
Andrew Tridgell
279e942581
APM: added RSSI in raw message too
2012-08-22 13:48:09 +10:00
Andrew Tridgell
e74dab122a
APM: added RECEIVER_RSSI_PIN option
...
this allows for the receiver RSSI to be sent over MAVLink
Thanks to Burt Green for the suggestion
2012-08-22 13:33:12 +10:00
Andrew Tridgell
ca63e23ec3
build: added sitl-newcontrollers to build_all.sh
2012-08-22 12:45:14 +10:00
Andrew Tridgell
703ca469fe
APM: added optional use of new APM_Control library
...
thanks to Jon Challinger for the new controllers!
2012-08-22 12:45:14 +10:00
Andrew Tridgell
ba41612e7d
AHRS: new functions to support APM_Control library
2012-08-22 12:42:37 +10:00
Andrew Tridgell
2bc2460c07
APM: optional build with new controller libs
2012-08-22 12:39:07 +10:00
Jonathan Challinger
10505093e1
APM_Control: added new APM controllers library
...
See
http://www.challinger.us/2012/07/16/tuning-arduplane-roll-and-pitch-controllers/
for details
2012-08-22 12:39:07 +10:00
uncrustify
d45328c98c
uncrustify libraries/DataFlash/DataFlash.h
2012-08-21 19:19:52 -07:00
uncrustify
a935bf77ce
uncrustify libraries/DataFlash/DataFlash.cpp
2012-08-21 19:19:52 -07:00
uncrustify
e233e4d625
uncrustify libraries/AP_Motors/AP_MotorsHeli.h
2012-08-21 19:19:52 -07:00
uncrustify
24943e0ea7
uncrustify libraries/AP_Motors/AP_MotorsHeli.cpp
2012-08-21 19:19:52 -07:00
uncrustify
4189870bfb
uncrustify libraries/AP_Limits/AP_Limit_Geofence.cpp
2012-08-21 19:19:52 -07:00
uncrustify
e49b12ca2e
uncrustify libraries/AP_GPS/GPS.h
2012-08-21 19:19:52 -07:00
uncrustify
c4a52a292f
uncrustify libraries/AP_GPS/AP_GPS_IMU.h
2012-08-21 19:19:52 -07:00
uncrustify
89bd01f86e
uncrustify libraries/AP_GPS/AP_GPS_IMU.cpp
2012-08-21 19:19:52 -07:00
uncrustify
5ed90851e3
uncrustify libraries/AP_GPS/AP_GPS_UBLOX.cpp
2012-08-21 19:19:52 -07:00
uncrustify
7de08acf09
uncrustify libraries/AP_GPS/AP_GPS_MTK16.cpp
2012-08-21 19:19:52 -07:00