Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
7,084 Commits 71 Branches 509 Tags 716 MiB
Commit Graph

95 Commits

Author SHA1 Message Date
Andrew Tridgell 4d9a74d742 Plane: cleanup driver declaration 
remove a lot of the #if nesting
 2013-01-21 16:08:55 +11:00
Andrew Tridgell 4deee014d6 Plane: setup PX4 airspeed analog port 2013-01-21 13:56:28 +11:00
Andrew Tridgell 2e04d4827a Plane: run PX4 console at 57600 2013-01-20 22:13:21 +11:00
Andrew Tridgell f9cb9e08ae Plane: fixed orientation of PX4 compass 2013-01-17 17:23:34 +11:00
James Bielman ab37f833db MS5611: Fix CONFIG_MS5611_SERIAL definitions. 
- Make sure the values are defined as integers.  We were always using
  SPI rather than using I2C when desired.
 2013-01-09 11:19:51 -08:00
Andrew Tridgell 38f56be2c4 Plane: enable hardware sensors on PX4 2013-01-04 21:07:56 +11:00
Andrew Tridgell 9e0096ddb5 Plane: fix handling of sensors HIL startup 2013-01-04 12:34:35 +11:00
James Bielman 264db3670e AP_Baro: Add CONFIG_MS5611_SERIAL option to choose between SPI and I2C. 
- Update ArduCopter and ArduPlane modules to pass the correct serial
  driver to the MS5611 driver.
- Update barometer examples, assuming SPI.
 2013-01-03 13:48:06 -08:00
Andrew Tridgell 868269e037 Plane: switch PX4 to attitude HIL for now 
a bit easier to debug
 2013-01-03 13:38:54 +11:00
Andrew Tridgell e8075b1657 Plane: for HIL_SENSORS for PX4 for now 
until we have sensor drivers
 2013-01-03 11:03:24 +11:00
Andrew Tridgell 1a49549e3e Plane: start port of main ArduPlane code to AP_HAL_PX4 2013-01-02 14:45:08 +11:00
Andrew Tridgell b6295c12e1 Plane: fixes for new AP_Relay interface 2013-01-02 10:18:45 +11:00
Andrew Tridgell 9a2e77b797 Plane: fully disable relay and mount code on APM1-1280 
this saves some more flash space
 2012-12-20 14:53:23 +11:00
Andrew Tridgell 772f93ea10 Plane: fixed config for 1280 2012-12-20 14:53:23 +11:00
Andrew Tridgell 41272614ce Plane: simplify board config defines 2012-12-20 14:52:32 +11:00
Andrew Tridgell e82deca305 Plane: updates to support AP_HAL SITL 2012-12-20 14:51:40 +11:00
Pat Hickey f8dec9ae4a ArduPlane: fixes to use CONFIG_HAL_BOARD instead of CONFIG_APM_HARDWARE 2012-12-20 14:51:37 +11:00
Andrew Tridgell 805a340350 Plane: enable attitude and raw logging in HIL modes 2012-12-04 11:13:33 +11:00
Andrew Tridgell 24e1af1c82 Plane: fixed sensors and attitude HIL 
we now use the Stub version of the InertialSensor driver. In sensors
HIL we can now correctly drive the AHRS code.
 2012-12-03 23:26:39 +11:00
Andrew Tridgell a6d8dbeac2 Plane: update ArduPlane for new ins interface 2012-11-30 07:15:18 +11:00
Andrew Tridgell 8f108e2eb3 APM: added AMP_OFFSET option 
thanks to Alexey Kozin!
 2012-11-21 13:34:27 +11:00
rmackay9 ef727bbb3c ArduPlane: move to use new INS library instead of IMU library 2012-11-07 19:21:03 +09:00
Andrew Tridgell 8652bfee8d APM: added RSSI_PIN option for receiver RSSI 
this allows you to configure the pin for receiver RSSI without
recompiling
 2012-11-06 22:04:41 +11:00
rmackay9 775489d658 ArduPlane: added BATT_VOLT_PIN and BATT_CURR_PIN parameters to allow support for new 3DR IV battery monitor 2012-10-13 20:51:41 +09:00
rmackay9 41fbb19cf5 AP_InertialSensor_MPU6000: replaced _cs_pin parameter with #define and saved 1 byte of memory 
Updated ArduCopter, ArduPlane and example sketches in AP_InertialSensor, AP_IMU and AP_AHRS libraries because they no longer need to pass in cs_pin to the constructor
 2012-09-28 19:21:59 +09:00
Andrew Tridgell 68f1b6336f APM: tweak the default options for an APM1 1280 board 
this allows a few more things to fit in
 2012-09-19 19:36:19 +10:00
Andrew Tridgell cebb67e1df APM: removed the unused sonar code 
when we start supporting a sonar we'll add a AP_Sonar library, like
AP_Airspeed
 2012-09-19 19:35:22 +10:00
Andrew Tridgell 5f3ffe4839 APM: switch to Randys new IMU rate control method 
this drives the speed of the 50Hz loop by the number of samples
accumulated in the IMU. This should give much more consistent timing
in DCM.

Thanks to Randy for introducing this scheme in ArduCopter!
 2012-09-11 16:39:36 +10:00
Andrew Tridgell a446a7a9ed APM: allow serial buffer size to be configured 
very useful for packet forwarding setups
 2012-09-08 10:06:35 +10:00
Andrew Tridgell f6c3197cd2 APM: added new TELEM_DELAY parameter 
number of seconds to delay telemetry
 2012-08-30 08:59:39 +10:00
Craig Elder 4ad516c445 Arducopter: increased MAVLINK delay to 6s to reduce the chance of xBee bricking 
Arduplane:  increased MAVLINK delay to 6s to reduce the chance of xBee bricking
Ardurover:  increased MAVLINK delay to 6s to reduce the chance of xBee bricking
 2012-08-28 20:09:10 -07:00
Amilcar Lucas b48a1f1fc4 ArduPlane: Fix 1280 builds 
Added fine-granular features in the AP_Mount class to reduce code size on 1280 chips
Remove camera trigger support on 1280 chips
 2012-08-27 01:33:45 +02:00
Amilcar Lucas 769f04b7d6 Improve comments, no functional changes 2012-08-27 01:32:27 +02:00
Andrew Tridgell c0c0b8c976 APM: added RECEIVER_RSSI_PIN option 
this allows for the receiver RSSI to be sent over MAVLink

Thanks to Burt Green for the suggestion
 2012-08-22 13:33:12 +10:00
Andrew Tridgell 9e926eae51 APM: optional build with new controller libs 2012-08-22 12:39:07 +10:00
uncrustify 3bee769405 uncrustify ArduPlane/config.h 2012-08-21 19:19:51 -07:00
Andrew Tridgell 343f7d2de0 APM: removed DMP support from ArduPlane 
Without centripetal correction the DMP code will almost certainly
crash a plane
 2012-08-22 11:46:35 +10:00
Andrew Tridgell 6d11940ada AHRS: removed Quaternion build support from APM/ACM/rover 2012-08-22 10:42:21 +10:00
Andrew Tridgell 2865434d02 APM: added 'OBC' failsafe module for ArduPlane 
this adds FS_* parameters for setting up APM to follow the outback
challenge failsafe rules.

This includes:

 - manual pin
 - heartbeat pin
 - waypoint for heartbeat failure
 - waypoint for GPS failure
 2012-08-15 12:39:34 +10:00
Andrew Tridgell e2c8ec2c9e APM: removed THROTTLE_REVERSE option 
Better to use RC3_REV
 2012-08-09 10:04:44 +10:00
Andrew Tridgell e133900c68 APM: Added STICK_MIXING option 
this replaces the compile time option. Disabling during long distance
flights when the transmitter may be out of range is useful.
 2012-08-09 08:53:29 +10:00
Amilcar Lucas d34549f386 Add an optional second mount to ArduPlane and ArduCopter 2012-08-08 23:22:24 +02:00
Andrew Tridgell dcc50b5705 AP_Airspeed: removed values passed to constructor 2012-08-08 16:38:39 +10:00
Andrew Tridgell 2114acddf1 APM: fixed default flap speed 
the default of 255 translates to -1 as a AP_Int8, so use zero to mean
no flaps
 2012-08-08 13:04:21 +10:00
Andrew Tridgell a823c9ceae APM: removed cli slider and dipswitch options 
use mavlink/eeprom for all config
 2012-08-08 12:12:29 +10:00
Amilcar Lucas 50b5d33745 Enable camera triggering by default 2012-08-04 16:32:47 +02:00
Amilcar Lucas 82b82283be ATmega1280 does not have enough memory for mount support so disable AUTO GPS support, to allow mount support to fit. 
This should almost have no side effects, because the most users use MTK anyways.
If the user defined a GPS protocol, than we will NOT overwrite it
 2012-08-04 16:32:20 +02:00
rmackay9 06e35820e5 ArduPlane: allow MPU6000's DMP to be used for attitude estimation. 
Enable by adding this line to APM_Config.h:
#define DMP_ENABLED ENABLED
 2012-07-28 19:50:40 +09:00
Andrew Tridgell 6bcfe913f7 APM: added a SCALING_SPEED parameter 
this allows users to adjust the base speed used for scaling roll/pitch
PIDs. This can be used to make PIDs work for both airspeed and
non-airspeed control
 2012-07-26 11:30:23 +10:00
Andrew Tridgell f6d7d1bc59 APM: changed PID library to do automatic deltat calculation 
this fixes a problem with the HDNG2RLL PID, which was using the wrong
time base and prevents similar bugs from happening in the future
 2012-07-06 19:59:18 +10:00