Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
5,968 Commits 71 Branches 509 Tags 778 MiB
Commit Graph

5968 Commits

Author SHA1 Message Date
rmackay9 1958169e30 SPI3: add checks that SPI bus has been initialised to reduce possibility of interfering with UART3 on APM1 2012-10-18 19:17:24 +09:00
rmackay9 a2a3eed063 ArduCopter: bug fix for telemetry not working on APM1. 
SPI3 is also UART3.  On APM1 we use UART3 for telemetry and don't need SPI3.
 2012-10-18 19:15:21 +09:00
rmackay9 d2912e4e01 ArduCopter: added spi_semaphore to stop conflicts between dataflash and optical flow sensor on APM1 2012-10-18 17:04:44 +09:00
rmackay9 17afd075c1 DataFlash_APM1: use spi_semaphore to avoid conflicts with optical flow 2012-10-18 17:03:50 +09:00
rmackay9 a1b4531545 AP_OpticalFlow: added ability to pass in semaphores for main spi bus to stop conflicts with dataflash on APM1 2012-10-18 17:02:45 +09:00
rmackay9 785d9ca6a7 DataFlash_APM2: renamed semaphore to spi3_semaphore to make it more obvious which semaphore is required. 2012-10-18 17:00:05 +09:00
Andrew Tridgell a53cbc08f3 GPS: avoid output delays in the GPS auto detection 
this sends out the GPS init strings in 16 byte chunks to avoid causing
timing glitches when no GPS is attached
 2012-10-18 16:18:32 +11:00
Olivier ADLER 0b171178b5 ArduPPM: Redundancy mode 
Reworked the PPM decoder (i did forget the sync symbol pre-pulse)
Splitted pre-pulse and pulse width variable for better reliability and easier processing
 2012-10-17 16:28:05 +02:00
rmackay9 401fb4101c ArduCopter: removed deprecated mag offset routine. 
Also removed commented-out block of code from navigation.pde.
 2012-10-17 19:47:21 +09:00
rmackay9 9e3c2dd105 ArduCopter: updated firmware version to 2.7.4-Epsilon 2012-10-17 19:27:11 +09:00
rmackay9 8519fe55d3 ArduCopter: more out-of-date commented out code removed 2012-10-17 19:25:14 +09:00
rmackay9 b944d9df26 ArduCopter: bug fix in earthframe->body frame translation. 
Provided by Leonard Hall.

Also removed large unnecessary comments.
 2012-10-17 19:15:25 +09:00
rmackay9 7d7de976c3 ArduCopter: reduced optical flow's I and IMAX terms 2012-10-17 17:47:43 +09:00
rmackay9 956b347d68 ArduCopter: updated firmware version to 2.7.4-Delta 2012-10-17 10:20:41 +09:00
rmackay9 5fbe53a84d ArduCopter: bug fix for get_yaw_rate_stabilized_ef 
Provided by Leonard Hall
 2012-10-17 10:18:24 +09:00
Andrew Tridgell 07c291bb73 APM: fixed a comment typo 2012-10-16 17:21:04 +11:00
Andrew Tridgell f828956cb8 battery: use set_pin() to allow pins to be changed at runtime 2012-10-16 17:20:49 +11:00
Andrew Tridgell a979fb6014 AP_AnalogSource: added set_pin() interface 
this allows pin numbers to be changed at runtime
 2012-10-16 17:20:15 +11:00
Andrew Tridgell 5642922ca7 RC_Channel: simplify the example 
use an array of channels
 2012-10-16 15:50:54 +11:00
Andrew Tridgell 86b509a609 RC_Channel: ensure _reverse is not 0 
this caused the example to fail
 2012-10-16 15:50:29 +11:00
Pat Hickey f48568c9a6 MultiFastSerial example sketch: notes on fatal error in avr-gcc 4.5.x 2012-10-15 20:42:19 -07:00
Pat Hickey e84a467311 FastSerial example sketch: Depend on AP_Common for PSTR definitions 2012-10-15 20:42:18 -07:00
Pat Hickey 76e93e9fd7 AP_Common: PSTR def has specific version for avr-gcc 4.6 compatibility 
* Also a small change in FastSerial/vprintf.cpp, which duplicates the
  PSTR definition
* Won't effect others using earlier versions of avr-gcc
 2012-10-15 20:42:18 -07:00
Olivier ADLER 3784f326e8 ArduPPM: Redundancy mode 
Base algorithm added for channel count auto detection in the decoder himself.
Replaced the #define for PPM_CHx_CHANNELS by PPM_CHx_MAX_CHANNELS.
Channel count #define was not needed anymore thanks to the channel count auto detection.
Channel detection post processing to do.
 2012-10-15 22:49:01 +02:00
Pat Hickey 2936dbb9de RC_Channel unit test: fixed build, functionality still wrong 2012-10-15 10:37:29 -07:00
Robert Lefebvre 063cb41a11 Adding some comments to parameters. 2012-10-15 09:37:02 -04:00
rmackay9 4016f3ba85 ArduCopter: update version information ahead of testing 2012-10-15 18:15:38 +09:00
Pat Hickey d75ca684cc MultiFastSerial test: make it easier to observe which serial port causes crash 2012-10-14 21:08:33 -07:00
LeonardTHall d7b7e1cefa New Yaw controller using rate feed forward and stabilize. 
Signed-off-by: LeonardTHall <LeonardTHall@gmail.com>
 2012-10-15 11:37:49 +09:00
Pat Hickey 930d387b8d FastSerial: add extra example sketch MultiFastSerial to test multiple ports 2012-10-14 18:58:12 -07:00
Olivier ADLER f84a12a5cb ArduPPM: Redundancy mode switchover algorithm 
Auto Switchover algorithm with primary receiver switchback.
Force switchover channel moved to channel 9
Manual modifications.
 2012-10-14 23:58:00 +02:00
rmackay9 ee5dab9647 ArduCopter: enable ACRO mode's AXIS_LOCK by default 2012-10-14 19:50:45 +09:00
rmackay9 997fe85880 ArduCopter: fixed acro mode 
Changes included:
Removing earth frame roll_rate_trim, pitch_rate_trim and yaw_rate_trim.
Switch ACRO mode to use YAW_ACRO instead of YAW_HOLD.
Changed YAW_ACRO to use stabilize yaw when axis_enabled.
Reset ACRO roll, pitch and yaw targets to current attitude when first entering ACRO.
 2012-10-14 17:47:46 +09:00
Olivier ADLER 6558731cff ArduPPM: Redundancy mode 
Dual input PPM decoder rework
flags for frame and channel error control
decoder algorithm rework
 2012-10-14 01:10:52 +02:00
Olivier ADLER 1ce9e5107f ArduPPM: Redundancy mode 
Work in progress
adding a channel pre pulse lengt #define for each PPM mode
dual channels PPM input capture interrupt algorithm
 2012-10-13 14:59:03 +02:00
rmackay9 240b0b43fd ArduCopter: small comment fixes related to battery monitoring 2012-10-13 20:52:14 +09:00
rmackay9 775489d658 ArduPlane: added BATT_VOLT_PIN and BATT_CURR_PIN parameters to allow support for new 3DR IV battery monitor 2012-10-13 20:51:41 +09:00
rmackay9 4a41a3d210 ArduCopter: added BATT_VOLT_PIN and BATT_CURR_PIN parameters to allow support for new 3DR IV battery voltage and current monitor 2012-10-13 18:40:46 +09:00
Robert Lefebvre dae81d2068 Added #define for Tilt_Compensation. 
Also added some detail to WP_Speed_Max parameter.
 2012-10-12 14:51:31 -04:00
Olivier ADLER e22a01682e ArduPPM: PPM Redundancy mode 
Some rework and cleaning for #define stuff
 2012-10-12 19:08:19 +02:00
Olivier ADLER 5e65e5ef8a ArduPPM : Redundancy mode 
Work in progress on a new Redundancy dual PPM sum mode for PPM encoder.

- New library PPM_Encoder_v3.h and new manual manual_v3.txt

- New format conversion capability between input and output PPM frame timings and channel count.

This will be experimental until heavily tested. The main goal is to allow the use of low cost satellite receivers in a high safety setup, and allow a new teacher / student RC mode without link between the two pilot transmitters.
 2012-10-12 14:32:14 +02:00
Robert Lefebvre 4e649a381c Added comment detail for Tilt_Comp Parameter. 
Reduced parameter default value for TradHeli.
 2012-10-11 13:17:39 -04:00
rmackay9 db852ccca8 VARTest.pde: fix compile errors for autotest 2012-10-11 21:52:48 +09:00
Olivier ADLER ee3df88dc3 Rename: file rename 
Small cleaning removing space in filename.
 2012-10-11 14:47:03 +02:00
Olivier ADLER 42e0aafcd9 Protocols : Jeti telemetry description 
This is the Jeti Telemetry protocol. Common in Europe for RC multicopters telemetry through 2.4 Ghz Jeti Duplex links.
 2012-10-11 11:42:45 +02:00
Olivier ADLER c6da744157 Test: test commit 
A small test
 2012-10-11 11:42:45 +02:00
rmackay9 1e79d265a1 ArduCopter: remove unnecessary (probably slightly harmful) extra barometer read 
The barometer reads including reading temperature was all moved to a timer but this extra read (originally to read the temperature) was probably forgotten.
 2012-10-11 18:31:10 +09:00
rmackay9 cf3e49eea2 ArduCopter: changed sin_pitch and sin_roll to faster equivalents 2012-10-11 17:54:42 +09:00
rmackay9 03933df5b7 ArduCopter: set default rate roll and pitch I terms to 0.010, and rate yaw to 0.015 
Updated after discussing with Marco
 2012-10-11 17:25:01 +09:00
rmackay9 35fa50234f ArduCopter: move I terms from stabilize to rate controllers 2012-10-11 17:20:05 +09:00