Commit Graph

250 Commits

Author SHA1 Message Date
murata d56bad781f AP_InertialSensor: change if statements to switch statement
No functional change
2016-12-24 12:23:59 +09:00
murata 398b7b83dd AP_InertialSensor: minor formatting fixes
No functional change
2016-12-24 12:23:58 +09:00
Andrew Tridgell 65b9b86099 AP_InertialSensor: unify MPU6000 and MPU9250 drivers
make a single AP_InertialSensor_Invensense driver. This avoids a lot
of duplication and will save time as new varients are added
2016-12-16 12:31:34 +11:00
Andrew Tridgell 0f984290c3 AP_InertialSensor: enable fast sampling by default on some boards 2016-11-25 17:59:54 +11:00
Andrew Tridgell 18d4286166 AP_InertialSensor: fixed pixfalcon 9250 detection 2016-11-18 14:24:39 +11:00
Andrew Tridgell f3f1f6b0b6 AP_InertialSensor: fixed gyro orientation on l3gd20H on pixhawk 2016-11-16 20:33:56 +11:00
Francisco Ferreira bfbb275577 AP_InertialSensor: on accel cal failure don't save values to zero
When the accel calibration fails leave the previous values saved but set them to defaults (scale default is ones, not zeros) and notify the GCS
This fixes an arithmetic exception when doing a second accel cal after the first one failed
2016-11-15 11:42:54 -08:00
Andrew Tridgell 624178f3be AP_InertialSensor: added INS_FAST_SAMPLE parameter
this allows enable/disable of fast sampling per IMU, making
experimentation easier.

It also fixes the fast sampling to always average over 8 samples, and
fixes the 9250 to use the correct accumulator when not doing fast
sampling
2016-11-15 21:16:40 +11:00
Andrew Tridgell 4ebf3309f7 AP_InertialSensor: auto-handle invensense sensor changes
some boards swap out MPU6000 for MPU9250 or ICM20608
2016-11-11 08:08:55 +11:00
Andrew Tridgell 70c27a85de AP_InertialSensor: on PH2 run the first MPU9250 at 8kHz 2016-11-10 13:04:15 +11:00
Andrew Tridgell cb70bae167 AP_InertialSensor: use in-tree drivers for PH2SLIM 2016-11-10 11:44:52 +11:00
Andrew Tridgell 8a3f6a8902 AP_InertialSensor: use FIFO and implement fast sampling for MPU9250 2016-11-10 11:44:51 +11:00
Andrew Tridgell e25a391a8f AP_InertialSensor: fixed typo 2016-11-09 17:08:15 +11:00
Andrew Tridgell 7137d5c6f2 AP_InertialSensor: switch pixracer to always use in-tree drivers 2016-11-09 17:08:14 +11:00
Andrew Tridgell 84c3e29891 AP_InertialSensor: use AP_HAL rotations for MPU6000 2016-11-09 17:08:14 +11:00
Andrew Tridgell 03b7bc9e65 AP_InertialSensor: use internal drivers for PHMINI
this gets us fast sampling
2016-11-09 17:08:12 +11:00
Andrew Tridgell 3d7d773883 AP_InertialSensor: added support for ICM20608 on Pixracer 2016-11-09 17:08:08 +11:00
Andrew Tridgell 2c1e9024f1 AP_InertialSensor: detect missing accels or gyros 2016-11-09 17:08:07 +11:00
Andrew Tridgell 106a91c64c AP_InertialSensor: use init_gyro() on startup
this saves the calibration parameters which should be done on
calibration
2016-11-09 17:08:07 +11:00
Andrew Tridgell 408593465f AP_InertialSensor: fixed rotation for mpu9250 on pixracer 2016-11-09 17:08:07 +11:00
Andrew Tridgell 790dd4769b AP_InertialSensor: simplify rotations for MPU9250 2016-11-09 17:08:07 +11:00
Lucas De Marchi 469efb00f6 AP_InertialSensor: save id for gyro and accel instances
This allows each sensor to be uniquely identified in the system by using
either the index inside the backend or for those that use the Device
interface, to use the bus type, location, and device id.

We leave 16-bit for each sensor to be able to change its own
identification in future, which allows them to be changed in an
incompatible manner forcing a re-calibration.
2016-11-09 17:08:05 +11:00
Lucas De Marchi bbb9bfa95e AP_InertialSensor: save only gyro calibration
When we are initializing the gyro and then saving the calibration we are
also saving the calibration values for the accelerometers. Right now
this is non-problematic, but we want to check that the ID of the
accelerometer corresponds to the ID of the sensor detected. If we also
save accel calibrations we would actually override the ID of the
accelerometer.

Rename the method to _save_gyro_calibration() and save only on gyro
values.
2016-11-09 17:08:05 +11:00
Lucas De Marchi ace61087a1 AP_InertialSensor: remove product_id
We only leave the parameter there for backward-compatibility. However
product id on the inertial sensor is not much useful since it's only
kept for the first instance.

A better implementation per-gyro and per-accel is needed in order to
avoid problems with sensors taking the offsets configured for another
sensor.
2016-11-09 17:08:05 +11:00
Andrew Tridgell 4ef92b5e39 AP_InertialSensor: enable all 3 IMUs on PH2 2016-11-09 17:08:04 +11:00
Andrew Tridgell a5c5e033d2 AP_InertialSensor: fixed threading and locking in remaining backends
use a backend semaphore for shared data and use thread per bus where
available
2016-11-09 17:08:01 +11:00
Andrew Tridgell b92c48548a AP_InertialSensor: added per-instance rotation for LSM9DS0 2016-11-09 17:08:00 +11:00
Andrew Tridgell 2df6ed08c2 AP_InertialSensor: added optional per-instance orientation
this is needed for multi-sensor boards to get orientation right for
each sensor
2016-11-09 17:08:00 +11:00
Andrew Tridgell 7832f1a1b6 AP_InertialSensor: allow for in-tree drivers for PX4 2016-11-09 17:07:58 +11:00
murata c808ee2f49 Global: To nullptr from NULL.
RC_Channel: To nullptr from NULL.

AC_Fence: To nullptr from NULL.

AC_Avoidance: To nullptr from NULL.

AC_PrecLand: To nullptr from NULL.

DataFlash: To nullptr from NULL.

SITL: To nullptr from NULL.

GCS_MAVLink: To nullptr from NULL.

DataFlash: To nullptr from NULL.

AP_Compass: To nullptr from NULL.

Global: To nullptr from NULL.

Global: To nullptr from NULL.
2016-11-02 16:04:47 -02:00
priseborough 7460d97c9a AP_InertialSensor: Update parameter documentation
Add brief description of body frame conventions.
2016-10-27 14:54:45 +11:00
priseborough 54a431a51d AP_InertialSensor: Update position offset parameter documentation
Notify users of the potential for velocity noise when using larger offset values..
Specific advice in terms of values has not been provided because it is highly dependent on Gyro noise levels.
2016-10-27 14:54:43 +11:00
priseborough 6db93d8a21 AP_InertialSensor: Add parameters defining accelerometer position offset 2016-10-27 14:54:41 +11:00
Mathieu OTHACEHE 152edf7189 Global: remove mode line from headers
Using a global .dir-locals.el file is a better alternative than
reincluding the same emacs header in every file of the project.
2016-10-24 09:42:01 -02:00
Gustavo Jose de Sousa 68fe536da3 AP_InertialSensor: use BMI160 for Intel Aero 2016-09-03 01:03:07 -03:00
Gustavo Jose de Sousa cd0d65dc3f AP_InertialSensor: don't check {gyro,accel}_available twice
That gives a slightly simpler code.
2016-07-22 19:58:08 -03:00
Gustavo Jose de Sousa 69405cc99a AP_InertialSensor: fix timing debug macro
- Use "INS_" prefix for the name in order to limit the scope for that macro.

- Don't define it in the code and check if it is defined instead of checking
  the value. With that, there's no need to touch the code for enabling debug,
  only a reconfiguration is necessary (e.g., `CXXFLAGS='-DINS_TIMING_DEBUG' waf
  configure ...`).
2016-07-21 19:01:28 -03:00
Gustavo Jose de Sousa ee7c40be61 AP_InertialSensor: BMI160: add backend
The reason of defining BMI160_MAX_FIFO_SAMPLES as 8 can be found on the
following histogram of the number of samples in the FIFO on each read while
performing the accelerometer calibration process:

Samples Count   Freq Acc. Freq
------------------------------
      1  3842 0.1201  0.120111
      2 13172 0.4118  0.531904
      3  9065 0.2834  0.815300
      4  2710 0.0847  0.900022
      5  2231 0.0697  0.969769
      6   816 0.0255  0.995279
      7   137 0.0043  0.999562
      8    13 0.0004  0.999969
     13     1 0.0000  1.000000
2016-07-15 16:46:06 -03:00
Gustavo Jose de Sousa e85ac8b2c5 AP_InertialSensor: inform maximum gyro average difference
While at it, define GYRO_INIT_MAX_DIFF_DPS.
2016-06-27 17:22:43 -03:00
Gustavo Jose de Sousa e6f62080f5 AP_InertialSensor: fix best_diff on gyro initialization
Without this patch, if accel_diff.length() > 0.2f and j == 0, then
best_diff[k] would be zero forever since diff_norm[k] >= 0 for any j.
2016-06-27 17:20:51 -03:00
Grant Morphett 34fa2a39bd AP_InertialSensor: Changing the default gyro filter from 10 to 4
This change is only for Rovers.
2016-06-16 14:37:55 +09:00
Lucas De Marchi b067bce140 AP_InertialSensor: remove support for flymaple 2016-05-23 21:49:45 -03:00
Lucas De Marchi 7503c1b6d4 AP_InertialSensor: update doc about used ids 2016-05-23 21:49:45 -03:00
dgrat 41661f815f AP_Math: Replace the pythagorous* functions with a variadic template
The new function can deal with a variable number of function parameters.
Additionally, I renamed the functions to norm(), because this is the
standard name used in several other projects.
2016-05-10 11:41:26 -03:00
Andrew Tridgell be41d402b5 AP_InertialSensor: added set of delta angle time for replay 2016-04-26 15:50:46 +10:00
Andrew Tridgell 4401cbec72 AP_InertialSensor: cope with zero delta angle time from Replay 2016-04-26 15:37:11 +10:00
mirkix c3a6a56ebb AP_InertialSensor: Add second MPU9250 autodetection to BBBmini 2016-04-24 10:57:57 -03:00
ashwinvasudevan e33812e1cb AP_InertialSensor: added missing brackets 2016-03-23 17:46:41 +09:00
raspilot 1d1d224c18 AP_InertialSensor: Enable dual IMU for raspilot 2016-03-18 21:51:37 -03:00
AndersonRayner c9d5c548a6 Corrects a bracket error for the LSM9DS0 IMU
Switches the probe of the accel and gyro so they boot correctly (was
failing the WHOAMI with a switched result)
2016-02-25 20:08:01 -03:00