Commit Graph

8361 Commits

Author SHA1 Message Date
Randy Mackay b462bfed84 Copter: remove unused print_wp function 2013-06-02 11:32:38 +09:00
Dr Gareth Owen 4c6d6ea96e changed yaw reset to when armed to not use initial_simple_bearing 2013-06-02 11:29:30 +09:00
Dr Gareth Owen 79bd8b4fd0 rtl resets yaw to same as when armed - unless user specifies otherwise 2013-06-02 11:29:27 +09:00
Randy Mackay 0460147a15 Copter: guided mode yaw fix
Nose of copter now points at next guided point if it is more than 10m
away
2013-06-02 11:25:35 +09:00
Andrew Tridgell a0bf49ab42 Rover: updated AUTO_TRIGGER_PIN docs 2013-06-02 07:55:49 +10:00
Randy Mackay 57f7d5d18f AutoTest: reduce circle test time 2013-06-01 21:35:04 +09:00
Andrew Tridgell d9bcfd913a Plane: reset attitude integrators on mode change 2013-06-01 22:29:38 +10:00
Andrew Tridgell 05889391e5 APM_Control: cope with zero integrator or tconst
if the user zeros the integrator tuning factor, we need to zero the
integrator
2013-06-01 22:29:38 +10:00
Andrew Tridgell bb3171ab5f Plane: zero attitude integrators on the ground 2013-06-01 22:29:38 +10:00
Andrew Tridgell 512d3d811d APM_Control: neaten up code formatting 2013-06-01 22:29:38 +10:00
Randy Mackay 5203ba9fe3 Copter: alt hold feed forward filter 2013-06-01 21:13:47 +09:00
Randy Mackay da97c991f8 AutoTest: add circle mode test 2013-06-01 18:21:31 +09:00
Randy Mackay 592062870e Autotest: update randy's sim script 2013-06-01 18:21:31 +09:00
Randy Mackay 99f5462a03 Copter: circle mode fixes 2013-06-01 18:21:30 +09:00
Randy Mackay e3cd494709 Copter: remove debug message 2013-06-01 18:21:30 +09:00
Randy Mackay 7a2afb7443 Copter Nav: add accessor for waypoint speed 2013-06-01 18:21:29 +09:00
Randy Mackay 8b87849acd Math: add wrap_PI 2013-06-01 18:21:29 +09:00
Randy Mackay 23ce35d292 Copter: remove unused NAV_WP_INAV #define 2013-06-01 18:21:28 +09:00
Andrew Tridgell b91755318a HAL_PX4: play some tones on PX4IO firmware load
gives some chance of knowing if it worked
2013-06-01 12:41:28 +10:00
Andrew Tridgell c82caeeba1 HAL_AVR: configure analog inputs as INPUT without pullup
not all pins were defaulting to this, which led to some strange
readings on some devices. First noticed by Andi on a LM335 temperature
sensor
2013-06-01 12:19:02 +10:00
Randy Mackay 89bbf5844f Copter WPNav: remove unused variable 2013-05-31 21:41:32 +09:00
Randy Mackay 5e2fc32410 Copter: remove unused cli wp report 2013-05-31 21:04:27 +09:00
Randy Mackay 1722e438d8 Copter: pass alt hold gain to WP_Nav library 2013-05-31 21:04:10 +09:00
Randy Mackay 8c4a7ec094 Copter WPNav: Leonard's improved speed fix
Also pass in althold gain from main code
2013-05-31 21:03:27 +09:00
Andrew Tridgell dc712aab1f build: removed plane 1280 build from autotest
we probably won't support it for the next release.

See http://diydrones.com/forum/topics/keep-supporting-apm1-1280-in-arduplane
2013-05-31 18:30:11 +10:00
Andrew Tridgell 14c8c1bdfc APM_Control: tweak code layout and param descriptions 2013-05-31 17:24:55 +10:00
Randy Mackay d875e95da3 Copter: remove nav and wp tests from cli
This are more fully tested in the autotester
2013-05-31 15:23:39 +09:00
Randy Mackay ae91c4a237 Copter: alphabetise order of cli test menu 2013-05-31 15:16:06 +09:00
Randy Mackay e2495b7a49 Copter: alphabetise order of cli setup menu 2013-05-31 15:16:06 +09:00
Randy Mackay a0c8bf238e Copter: move motors test to test menu
Also allow test to be run from mission planner's cli window
2013-05-31 15:16:05 +09:00
Randy Mackay 76028fc9d3 Copter Motors: use _min_throttle in output_test 2013-05-31 15:16:04 +09:00
Randy Mackay 28f2f87b26 Copter Motors: minor formatting change 2013-05-31 15:16:04 +09:00
Andrew Tridgell 2cb28076c8 autotest: tweak plane autotest mission and parameters
a bit better with the new controllers
2013-05-31 15:31:59 +10:00
Andrew Tridgell f4efa92d3b APM_Control: fixed parameter names 2013-05-31 15:31:25 +10:00
Andrew Tridgell cd55ed45e2 Plane: removed the old roll/pitch/yaw PID controllers
use the new controllers, with auto parameter conversion
2013-05-31 14:06:56 +10:00
Andrew Tridgell 3e8af05d15 APM_Control: match parameter names with old PID controllers
this will make upgrading easier
2013-05-31 14:06:56 +10:00
Andrew Tridgell 91a04ab654 Plane: fixed headers for mode logging 2013-05-31 14:04:03 +10:00
Randy Mackay 1807840d4f Copter: fixed comments re mag field pre-arm check 2013-05-31 12:28:04 +09:00
Randy Mackay 7b50ecc73c Copter: pre-arm check for mag field length 2013-05-31 12:23:19 +09:00
Randy Mackay a1821c89e7 Copter: pre-arm check for board voltage < 5.8V 2013-05-31 11:31:27 +09:00
Randy Mackay c6e383be0f Copter: disable board voltage pre-arm check for PX4 2013-05-31 11:27:54 +09:00
Andrew Tridgell cae1079747 Plane: auto-convert the old RLL2SRV* parameters to the new CTL_RLL_* parameters 2013-05-31 07:58:29 +10:00
Andrew Tridgell 53d3ce7d2c APM_Control: fixed some documentation (old parameter names) 2013-05-31 07:58:29 +10:00
Andrew Tridgell 38e414db33 AP_Progmem: fixed type of strncmp_P() 2013-05-31 07:58:29 +10:00
Andrew Tridgell ad2f6e1217 AP_Param: add support for converting between old and new parameters
this allows for a conversion table between old parameters and new
parameters, making firmware upgrades with moved parameters much easier
for users
2013-05-31 07:58:29 +10:00
Andrew Tridgell e48b8c7b4a Plane: improve RTL altitude docs 2013-05-31 07:58:29 +10:00
Paul Riseborough 716c124f73 APM_control: Modified gain definitions for roll and pitch controllers so PID gains behave like previous servo PIDS
Gain definitions in roll and pitch controllers were updated previously
so that the old PID tuning values could be transferred across.
Updated tuning guide for revised gain definition.
2013-05-31 07:58:20 +10:00
Andrew Tridgell 6e0f1f56de Plane: update docs on volt/current pin 2013-05-31 07:57:15 +10:00
Andrew Tridgell 2488c4fdc3 Copter: update docs on volt/current pin 2013-05-31 07:57:15 +10:00
Andrew Tridgell 2db8e15964 Rover: update docs on volt/current pin 2013-05-31 07:57:15 +10:00