Commit Graph

167 Commits

Author SHA1 Message Date
Andrew Tridgell 166c1fd530 PX4: startup FMUv3 sensors if available 2014-06-30 07:58:35 +10:00
NosDE 613fda4889 PX4: enabling mkblctrl for fmuv1/fmuv2
See the comments in mk/PX4/ROMFS/init.d/rc.APM for details
2014-03-29 06:45:30 +11:00
Andrew Tridgell 11956ece7c PX4: make compass calibrate fail non-fatal
until we sort out what is going on with compass calibration failures
this is the best option
2014-03-11 13:32:47 +11:00
Andrew Tridgell d3088b230a PX4: use RGBLED state to show startup state
solid white while booting, solid red on error
2014-02-04 21:43:47 +11:00
Andrew Tridgell 02c98f901d PX4: run hmc5883 compass calibration on every boot
this gives us more consistent compass readings between boots
2014-01-22 17:15:34 +11:00
Andrew Tridgell 792667e311 PX4: test MTD device on boot
full rwtest on FMUv2, read test on FMUv1
2014-01-16 13:11:14 +11:00
Andrew Tridgell 950bb09735 PX4: enable MTD on FMUv1 as well 2014-01-15 19:33:14 +11:00
Andrew Tridgell 9d09a96377 PX4: don't write to BOOT.LOG unless we have errors
this gets us to zero writes to microSD when no errors and not armed
2014-01-14 13:57:59 +11:00
Andrew Tridgell db19c8b410 PX4: start mtd driver on FMUv2 2014-01-14 12:46:27 +11:00
Andrew Tridgell db8b262939 PX4: enable mtd driver in build 2014-01-14 12:46:26 +11:00
Andrew Tridgell 8698ee43bb PX4: use BOOT.LOG instead of boot.log 2014-01-14 12:46:26 +11:00
Andrew Tridgell f7029e6587 px4: enable dual telemetry by default on FMUv1
this makes us compatible with wiring diagrams from PX4 site
2013-12-31 11:54:42 +11:00
Andrew Tridgell 2e9e464c4b PX4: update FMUv1 bootloader to use USBID 0x10 2013-12-21 06:25:43 +11:00
Andrew Tridgell 5ca73785c8 PX4: added automatic IO firmware update
this avoids the px4io.loaded file on the SD card that confused many
users
2013-12-13 12:44:47 +11:00
Andrew Tridgell 829767bed2 PX4: change FMUv2 bootloader USB ID to 0x0011 2013-12-13 11:02:19 +11:00
Andrew Tridgell 3ead86ee2d PX4: start all sensor types on PX4
this allows for secondary sensors
2013-12-09 17:34:06 +11:00
Andrew Tridgell f1bad032dd PX4: added support for the MPU6000 on the v2.4 Pixhawk 2013-11-28 21:32:12 +11:00
Andrew Tridgell 45bf96382c PX4: setup uartD on PX4
on FMUv1 enable uartD only if /fs/microsd/APM/uartD.en exists

on FMU2 always enable uartD
2013-11-23 19:29:22 +11:00
Andrew Tridgell 145bbd1656 PX4: changed startup to fail if no px4io on FMUv2 2013-11-02 21:41:11 +11:00
Andrew Tridgell 06e29536f1 PX4: added auth command to the build 2013-09-27 15:44:31 +10:00
Randy Mackay 8f16dbf95e PX4: start rgbled driver 2013-09-11 13:15:35 +09:00
Andrew Tridgell 905c84bb4c PX4: move PX4IO update to before any sensors start
this seems to make the update much more reliable, possibly as it
avoids an interrupt load from l3gd20 driver
2013-09-07 17:39:51 +10:00
Andrew Tridgell ef6407988b PX4: avoid nsh redirects in if statements
this helps avoid FAT filesystem corruption
2013-09-06 22:14:04 +10:00
Andrew Tridgell 7536e0759d PX4: enable rgbled on FMUv1 2013-09-06 08:15:31 +10:00
Andrew Tridgell 474a6d1218 PX4: added FMU bootloader images to ROMFS
this makes it much easier for users to update their bootloaders
2013-09-04 12:53:56 +10:00
Andrew Tridgell 28fcb1666e PX4: fixed build for change in library layout 2013-08-30 13:01:34 +10:00
Andrew Tridgell 8efcf05835 PX4: start nsh on USB if SD card not inserted
useful for debugging
2013-08-30 13:01:34 +10:00
Andrew Tridgell 1230df8b0d PX4: try to start meas_airspeed driver 2013-08-30 13:01:33 +10:00
Andrew Tridgell 01e9122850 PX4: disable sensors module
this isn't needed for APM, and fails to build
2013-08-30 13:01:33 +10:00
Andrew Tridgell f88bb5638b PX4: changes to startup after stacksize fix
we can redirect to FAT fs again, and remove the sleep lines
2013-08-30 13:01:33 +10:00
Andrew Tridgell 02b8d3497e PX4: avoid writing px4io update log to SD card
this seems to be one of the causes of lockups of the FMU
2013-08-30 13:01:33 +10:00
Andrew Tridgell 2e75dd50be PX4: added a sleep before probing for PX4IO update
this makes boot more reliable for some unknown reason
2013-08-30 13:01:33 +10:00
Andrew Tridgell 50cc6b5445 PX4: implement APM/nostart in rcS
this keeps the same shell on nostart, avoiding relying on nshterm
2013-08-30 13:01:33 +10:00
Andrew Tridgell 1c1e7ed414 PX4: changed to new names for board modules 2013-08-30 13:01:33 +10:00
Andrew Tridgell 84b21eed78 PX4: fixed test logic for console 2013-08-30 13:01:33 +10:00
Andrew Tridgell 1853223f45 PX4: hide the mkdir error on boot 2013-08-30 13:01:33 +10:00
Andrew Tridgell 372c424605 PX4: added mathlib/math/filter module
needed for (unused!) l3gd20 driver
2013-08-30 13:01:33 +10:00
Andrew Tridgell 927bbc6527 PX4: enable nshterm and math/filter on FMUv2 2013-08-30 13:01:33 +10:00
Andrew Tridgell a0af499aa5 PX4: added nshterm command 2013-08-30 13:01:33 +10:00
Andrew Tridgell 200d310843 PX4: better error handling in startup script 2013-08-30 13:01:33 +10:00
Andrew Tridgell f45e0fe737 PX4: don't need hil module 2013-08-30 13:01:32 +10:00
Julian Oes 3b9d71ae8a PX4: Changed the startup script to have mavlink on USART2 / Serial 1 on FMUv2 2013-08-30 13:01:32 +10:00
Andrew Tridgell 16a3f0d47b PX4: only put one IO firmware in ROMFS
saves a bit of space. This also fixes makefile based upload
2013-08-30 13:01:32 +10:00
Andrew Tridgell 0f5111caeb PX4: expand pass thru mixer to 8 channels
we're not using it now, but when we do use it we want all 8 channels
2013-08-30 13:01:32 +10:00
Andrew Tridgell d9d378f74e PX4: disable mixer load for now
loading a mixer disables IO output
2013-08-30 13:01:32 +10:00
Andrew Tridgell 6ce63da042 PX4: fixed airspeed build on FMUv1 2013-08-30 13:01:32 +10:00
Andrew Tridgell 0f8892e3b9 PX4: enable airspeed base driver and meas driver
this uses the new airspeed parent driver from Lorenz
2013-08-30 13:01:32 +10:00
Andrew Tridgell 3a6b7df23c PX4: disable bma180 driver for FMUv1 2013-08-30 13:01:32 +10:00
Andrew Tridgell 33aa91c0dc PX4: adapt rc.APM for FMUv1 and FMUv2 2013-08-30 13:01:32 +10:00
Andrew Tridgell bc6c5d0fb1 HAL_PX4: enable right FMUv2 drivers
ets_airspeed is ok, but mkblctrl driver doesn't build yet
2013-08-30 13:01:32 +10:00
Julian Oes ca29d543fd PX4: Added config file fmuv2 board, not used yet 2013-08-30 13:01:32 +10:00
Julian Oes 56e94d70e9 PX4: Adaptations to latest build changes 2013-08-30 13:01:32 +10:00
Marco Bauer ae2ee399c2 PX4: added support for mkblctrl driver
this enables runtime support for the mkblctrl I2C ESC drivers
2013-07-11 13:50:22 +10:00
Marco Bauer c7c0fc01c3 PX4: enable mkblctrl driver 2013-07-11 13:50:22 +10:00
Kevin Hester 6187c66147 PX4: A better error message in the log file when the px4io upgrade fails 2013-07-05 22:44:47 +10:00
Andrew Tridgell 3b6bf49c84 PX4: fixed startup logging
echo has a very limited argument count
2013-06-27 10:49:54 +10:00
Andrew Tridgell d487b1170e PX4: log devices being used in boot.log 2013-06-24 21:51:31 +10:00
Andrew Tridgell 48875a3e19 PX4: enable ets_airspeed driver if connected 2013-06-03 11:51:09 +10:00
Andrew Tridgell 109c1ca792 PX4: added eagletree I2C airspeed driver to the NuttX build
just needs a wrapper driver in APM now
2013-06-02 14:49:34 +10:00
Andrew Tridgell b91755318a HAL_PX4: play some tones on PX4IO firmware load
gives some chance of knowing if it worked
2013-06-01 12:41:28 +10:00
Andrew Tridgell dd0630dc16 PX4: fixed handling of nostart option 2013-05-13 11:27:55 +10:00
Andrew Tridgell 01da926f04 PX4: don't start px4io twice 2013-05-11 21:07:27 +10:00
Andrew Tridgell 1248a49284 PX4: need led driver in build for latest upstream changes 2013-05-10 06:16:54 +10:00
Andrew Tridgell 73250efc01 build: added support for the new PX4 build system 2013-05-10 06:16:54 +10:00
Andrew Tridgell 9b752f5d2a PX4: added in remaining example mixers 2013-05-10 06:16:54 +10:00
Andrew Tridgell 947297f0cd PX4: added base ROMFS files from upstream 2013-05-10 06:16:54 +10:00
Andrew Tridgell 172faeea26 HAL_PX4: moved rc.APM to new ROMFS directory 2013-05-10 06:16:54 +10:00