Commit Graph

115 Commits

Author SHA1 Message Date
Clyde McQueen 872cbc72ff autotest: MAV_CMD_DO_REPOSITION in sub 2024-07-25 10:44:16 +10:00
Willian Galvani bd27edc9f5 autotest: test mag fusion and origin backup
Co-authored-by: Clyde McQueen <clyde@mcqueen.net>
2024-07-11 14:17:54 -03:00
Peter Barker 96a78456bf autotest: reboot after reverting rangefinder settings
Co-authored-by: Thomas Watson <twatson52@icloud.com>

Thomas noted that tests prior to RngFndQuality were leaving a LUA rangefinder hanging around in https://github.com/ArduPilot/ardupilot/pull/27484

Thomas' patch fixes RngFndQuality to only collect context messages after a reboot, which will fix the problem.

But tests should *not* leave the vehicle in this state, so this patch fixes that.
2024-07-08 14:36:10 +10:00
Peter Mullen 7a0569fd8f autotest: test ArduSub surface tracking modes 2024-04-08 11:18:23 -03:00
Clyde McQueen c8fc90cca3 autotest: test SET_GPS_GLOBAL_ORIGIN mav msg 2024-04-02 11:00:22 +11:00
Peter Barker d0bb0b729a autotest: remove special-case-for-reboot for Sub
we now instantiate AP_Stats so the boot count is available
2024-03-13 08:07:40 +09:00
Clyde McQueen e3af56eff5 Sub: test for ABOVE_TERRAIN frame 2024-03-11 13:38:38 -03:00
Clyde McQueen f9db039dcc Sub: add SURFTRAK mode 2024-02-21 18:59:20 -03:00
Peter Mullen 948ee94cee Tools/autotest: Add LUA interface to access Range Finder state 2024-01-02 11:31:02 +11:00
Clyde McQueen ce824b725d Sub: copy 4.1 parm defaults 2023-11-29 22:13:02 -03:00
Andrew Tridgell f175cb19a1 Tools: added autotest for networking over UDP
downloads a log with mavlink over UDP from NET_P1 port
2023-11-17 10:54:24 -08:00
Willian Galvani 40cdb5d01e Autotest: improve flapping Sub test 2023-11-01 20:43:38 +11:00
Willian Galvani 24bed08c4e Tools: Autotest: fix and re-enable Subs's MAV_CMD_DO_CHANGE_SPEED test 2023-10-31 09:23:26 +11:00
Peter Barker a8bd417527 autotest: cope with rename of AutoTest to Testsuite 2023-10-27 14:17:09 +11:00
Peter Barker e2531a93f2 Tools: accept MAV_CMD_CONDITION_YAW as both long and int in Sub 2023-10-10 08:32:54 +09:00
Peter Barker 938ec84fa7 autotest: add (disabled) sub test for MAV_CMD_DO_CHANGE_SPEED
this doesn't work on master either...
2023-10-04 18:36:52 +11:00
Peter Barker 41518a4fc0 autotest: add test for Sub MAV_CMD_MISSION_START 2023-10-03 23:54:40 +11:00
Peter Barker fa6ec69bf1 autotest: add tests for Sub NAV_LAND and NAV_LOITER_UNLIM via mavlink 2023-09-26 11:38:28 +10:00
Tom Pittenger 4d05eda6f0 Tools/autotest: SITL reset to reset more/all16 Battery instances 2023-08-29 10:28:14 +10:00
Peter Barker bde43f167e autotest: use named parameters for send_cmd and run_cmd 2023-07-16 10:23:20 +10:00
Joshua Henderson b7672bf124 autotest: sub dive_manual update TSYS01 desired temperature 2022-10-18 10:05:31 +11:00
Peter Barker 0cd7668258 autotest: correct sub test now gripper is enabled 2022-10-04 10:58:34 +11:00
Willian Galvani 650e8652a9 Tools: Sub: add test to make sure changing modes does not cause altitude changes 2022-10-01 09:52:56 -03:00
Willian Galvani fcafd2c685 Tools: attempt to fix Sub flapping test 2022-09-30 15:24:33 -03:00
Peter Barker ba6cf1a42b autotest: remove disabled LogUpload test
This has been unused for a long time, and is getting in the way of reforms.  Its position as a test rather than as a part of a framework was always going to cause oddities, particularly after we split the Copter tests into several chunks.
2022-09-11 20:45:13 +10:00
Peter Barker 80c36ecc97 autotest: use reflection to collect test details
We had a pattern emerging of using the test name as the method name to contain the actual test.  We also tended to duplicate the docstrings in the test description - or omit the docstring.

This uses reflection to retrieve both the test name and the description, meaning less duplication of this information and enforcing having docstrings on the test methods.
2022-09-10 18:27:27 +10:00
Pierre Kancir 4e2e4fa4d4 Tools: autotest: remove useless shebang 2022-06-08 08:16:42 +09:00
Willian Galvani c63d12b6c9 Autotest: Sub: fix sub tests for new althold implementation
With this implementation (same as copter's) 1450 is within the pilot deadzone,
which breaks the test.
2022-04-13 16:23:55 -03:00
Willian Galvani 81cd49213a Autotest: Sub: tighten default watch_altitude_maintened delta 2022-04-13 16:23:55 -03:00
Willian Galvani e23e2cb63f Autotest: Sub: Add depth hold cases of large buoyancies and small inputs 2022-04-13 16:23:55 -03:00
Peter Barker 376d7ade50 autotest: use assert_receive_message to remove redundant code 2022-02-15 11:06:10 +11:00
Peter Barker 5ec82851d0 autotest: add test for Sub entering circle twice 2021-09-28 19:11:43 +10:00
Peter Barker d621fe0cde autotest: correct sub gripper mission
Ordinarily not run because gripper is disabled
2021-03-31 13:43:31 +11:00
Peter Barker fdbbcaa506 autotest: bump default speedups for several vehicles
These tests seem to run stabley on my box with essentially no speedup
limit
2021-03-24 14:46:48 +11:00
Peter Barker 4269cf52a2 autotest: split application of default parameters and defaultfile parameters
ensures all vehicles have LOG_DISARMED
2021-03-19 09:46:45 +11:00
Peter Barker 9120882e9e autotest: print name of open dataflash log when test exception caught
The stack trace is already extremely useful... but mapping back to the
relevant dataflash log is a bit of a pain.

Adding more stuff to this method in the future might be good, too.
2021-02-21 21:35:35 +11:00
Peter Barker dcc04ccd09 autotest: stop using MAVProxy to change modes 2021-02-18 17:38:52 +11:00
Peter Barker e221e6ce45 autotest: flake8 compliance for ardusub.py 2021-02-18 10:43:05 +11:00
Peter Barker a292fe1b8b autotest: use wait_statustext rather than mavproxy.expect
This is important when running under Valgrind as the text can be
significantly delayed.  wait_statustext times out in simulation time,
whereas mavproxy.expect has a flat 60s timeout
2021-02-17 18:16:04 +11:00
Peter Barker a5706a18af autotest: handle Py2 not having ConnectionResetError built in 2021-02-12 18:24:18 +11:00
Peter Barker f65bee80dc autotest: use BATTERY_STATUS to detect sub reboot
Sub doesn't implement AP_Stats so we have custom reboot detection for
it.

The current look-for-string strategy is flawed - we're missing the
string on reboot
2021-02-03 13:58:17 +11:00
Peter Barker ad2ab333f9 Tools: autotest: allow autotest to connect directly to SITL 2021-01-24 09:25:45 +11:00
Andrew Tridgell c396d15890 Revert "autotest: ensure defaults files don't set already-default-values"
This reverts commit 3d431cd4f1.

It breaks MissionPlanner SITL. We can re-apply once MissionPlanner
copes with external_model.
2021-01-20 08:54:43 +11:00
Peter Barker 3d431cd4f1 autotest: ensure defaults files don't set already-default-values
autotest: mark some vehicles as having external physics models

autotest: add default_params_filename to some vehicle info
2021-01-19 10:34:00 +11:00
Peter Barker 6433647d9e autotest: add trivial autotest for TSYS01 temperature 2021-01-05 12:01:51 +11:00
Peter Barker 65cffdad5a autotest: print stack traces when exceptions caught 2020-12-31 17:43:23 +11:00
Peter Barker b02f0ee51f autotest: make Sub's setting of FS_GCS_ENABLE persist across wipes 2020-12-25 12:18:01 +11:00
Randy Mackay bce3c551e7 Tools: sub set-position-target-global-int sends target once 2020-11-27 10:52:17 +09:00
Randy Mackay d63fe1eb6c Tools: sub set-position-target uses negative altitude 2020-11-27 10:52:17 +09:00
Peter Barker ba91cbb270 autotest: correct sub parameter name PSC_VELZ_P, fix test to match 2020-08-30 08:38:35 +10:00