Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
16,271 Commits 70 Branches 507 Tags 662 MiB
Commit Graph

16271 Commits

Author SHA1 Message Date
Leonard Hall 33a274c928 Copter: take-off uses PosControl's add_takeoff method 
Also balances pilot and takeoff climb rates
Also removes takeoff's direct use of poscontrol target

Combined effort of Randy and Leonard
 2015-05-01 12:56:32 +09:00
Randy Mackay 31edd6a72b AC_PosControl: add_takeoff_climb_rate method 
This function simply increments the current altitude target given a
climb rate and dt
 2015-05-01 12:56:30 +09:00
Randy Mackay 772a1acc37 Copter: cancel takeoff if mode changed 2015-05-01 12:56:28 +09:00
Randy Mackay ab608a8fcd Copter: minor takeoff param name change 
No functional change
 2015-05-01 12:56:25 +09:00
Randy Mackay 70f9739d77 Copter: add takeoff comments 2015-05-01 12:56:23 +09:00
Randy Mackay 6f5b5c24f2 Copter: rename tkoff_ to takeoff_ 2015-05-01 12:56:21 +09:00
Jonathan Challinger 73d961cebc Copter: mavlink initiated takeoff in alt-hold modes 
adds PILOT_TKOFF_ALT for target altitude above home in cm for pilot initiated takeoff
 2015-05-01 12:56:18 +09:00
Jonathan Challinger b10cf0f38a Copter: pre-takeoff throttle for sprung throttle sticks 
Adds PILOT_THR_BHV, PILOT_TKOFF_DZ parameters
 2015-05-01 12:56:16 +09:00
Jonathan Challinger e286323abc Copter: get_non_takeoff_throttle uses floats 2015-05-01 12:56:13 +09:00
Jonathan Challinger 348001e786 AP_Motors: add get_throttle_warn function 2015-05-01 12:56:11 +09:00
Peter Barker e1be814853 Replay: correct case for Airspeed when parsing airspeed messages 2015-05-01 09:18:49 +10:00
Peter Barker 67ba043b65 Replay: fix replay for CTUN (type=0) messages 2015-05-01 09:18:11 +10:00
Peter Barker 2b05f6e2b1 Replay: correct vehicle detection from MSG messages 2015-05-01 09:17:29 +10:00
Peter Barker db833a6473 Replay: fix null-pointer dereference when fields not present 2015-04-30 20:01:49 +10:00
Andrew Tridgell 9204cab7d5 autotest: fixed rover test 2015-04-30 18:45:38 +10:00
Andrew Tridgell 1cbbf1ab9e autotest: start SITL in synthetic clock mode 2015-04-30 17:19:56 +10:00
Andrew Tridgell 74581a55bc HAL_SITL: fixed startup of SITL in synthetic clock mode 2015-04-30 17:19:56 +10:00
Michael Day 8a6fc0ad77 Plane: If LAND_FLARE_SEC is 0 use LAND_FLARE_ALT for aim_height. 
See discussion here:

https://github.com/diydrones/ardupilot/pull/2197
 2015-04-30 17:19:55 +10:00
Michael Day 05d065b471 Plane: Make LAND_FLARE_SEC optional. 2015-04-30 14:34:34 +10:00
Andrew Tridgell a262f9d31b autotest: disable the devrelease build for now 
not being kept updated
 2015-04-30 14:09:59 +10:00
Andrew Tridgell 93fed6c2ac Plane: update release notes for 3.3.0beta2 2015-04-30 14:07:30 +10:00
Andrew Tridgell df21c6c68d AP_HAL: support micros64() and millis64() on all platforms 
this will allow for 64 bit timestamps in DF logs (Peter is working on
that)
 2015-04-30 12:17:34 +10:00
Andrew Tridgell c65f5a1bda Plane: disable camera mount support on APM2 
this makes the firmware small enough to squeeze onto an APM2 again
 2015-04-30 11:57:20 +10:00
Andrew Tridgell 4c4a4f9ea5 AP_RangeFinder: fixed cm to meter comparison 
thanks to EShamaev for this fix (see PR #1352)
 2015-04-30 11:26:36 +10:00
Andrew Tridgell 75c9689a64 Plane: added armed and safety state to STAT log message 2015-04-30 11:15:08 +10:00
Andrew Tridgell 5038e1d26d Plane: remove deprecated log types 
we no longer depend on the binary format for Replay, so we can change
IDs now
 2015-04-30 11:05:17 +10:00
Tom Pittenger f5dfe7c650 ArduPlane: Log isFlying status 
Log is_flying() status and its float probability in new STAT msg
and piggyback on MODE bitmask flag.
 2015-04-30 10:57:03 +10:00
Randy Mackay 1f80e8859c Tracker: 0.5 release notes 2015-04-29 14:50:04 +09:00
Randy Mackay dfadcad69d Mission: allow zoom_step to be negative 2015-04-29 14:36:25 +09:00
Randy Mackay bae1722946 AP_Motors: get_compensation_gain gets div-by-zero check 2015-04-29 14:36:22 +09:00
Randy Mackay 1b381b5675 Baro: get_air_density_ratio gets div-by-zero check 2015-04-29 14:36:20 +09:00
Jonathan Challinger 0dbe94c9a1 Copter: set motor air density ratio 2015-04-29 14:36:17 +09:00
Jonathan Challinger 41ae7207c7 AP_Motors: scale roll/pitch/yaw gain for air density 2015-04-29 14:36:15 +09:00
Jonathan Challinger e2ba351149 AP_Motors: refactor apply_thrust_curve_and_volt_scaling 2015-04-29 14:36:12 +09:00
Jonathan Challinger f381ef93e8 AP_Baro: add get_air_density_ratio 2015-04-29 14:36:10 +09:00
Jonathan Challinger 36cc832931 Copter: guided_posvel run update_z_controller at 400hz 2015-04-29 12:26:41 +09:00
Randy Mackay da629ce976 Copter: minor format fix 2015-04-29 12:03:34 +09:00
Jonathan Challinger f5fd89833d Copter: update YAW_LOOK_AHEAD to use inav velocity direction 2015-04-29 12:02:45 +09:00
Jonathan Challinger e5b6cf9966 Copter: use circular limit on tilt angle for arm check 2015-04-29 12:02:43 +09:00
Randy Mackay b55367ccc7 GCS_MAVLink: fix example sketch 2015-04-29 10:18:57 +09:00
Randy Mackay ff5f0f1d23 CPUInfo: add include to fix compile error 2015-04-29 10:10:21 +09:00
Randy Mackay 609bb0c56a Rover: fix MNT param description 2015-04-29 09:08:06 +09:00
Randy Mackay e122916815 Plane: fix MNT param description 2015-04-29 09:07:52 +09:00
Randy Mackay 85b0a18f61 Copter: fix MNT param description 
extra underscore was appearing in the parameter descriptions on the web
 2015-04-29 09:07:36 +09:00
Randy Mackay 276b2dcf5e Copter: move lost copter check to separate function 
Also run from scheduler instead of from arm/disarm stick checks
Run at 10hz instead of 1hz
soundalarm_counter to uint8
Disable if equivalent aux switch is setup
Remove SEVERITY_LOW message because the GCSs never print these anyway
 2015-04-29 00:05:03 +09:00
svefro 5bee93cba3 Copter: Lost copter alarm through sticks 2015-04-29 00:05:01 +09:00
Julien Dubois b7a6e3bf2c Copter: fix update_thr_average to run at 100hz 
Committed by Randy on Julien's behalf
 2015-04-28 22:44:59 +09:00
Peter Barker 56a8bf5460 Replay: use the message's name rather than number to determine which message handler to use for a message 2015-04-28 21:10:16 +10:00
Peter Barker 42351edfa6 Replay: use dataflash log format messages to extract message data instead of using structs 
dataflash logs have been self-describing since 2013.  Replay now uses the descriptions supplied in the dataflash log to understand the format of any particular message.

This change should allow fields to be added to messages with no impact on Replay.
 2015-04-28 21:10:15 +10:00
Randy Mackay 60bc986e71 VARTest: remove duplicate ap_message enum 2015-04-28 20:09:07 +09:00