Commit Graph

4264 Commits

Author SHA1 Message Date
Andrew Tridgell 20941c15c3 Compass: fixed a comment 2012-03-29 12:39:53 +11:00
Andrew Tridgell 79deeef0a0 Compass: added some more comments
explain the algorithm a bit more
2012-03-29 12:39:53 +11:00
Andrew Tridgell dd3218c913 pysim: ensure Vector3() uses floats 2012-03-29 12:39:53 +11:00
rmackay9 2cc87af180 Added multiple new tuning parameters to the inflight channel 6 tuning feature:
#define CH6_YAW_KI 24
        #define CH6_ACRO_KP 25
        #define CH6_YAW_RATE_KD 26
        #define CH6_LOITER_KI 27
        #define CH6_LOITER_RATE_KI 28
2012-03-28 23:58:58 +09:00
rmackay9 fd5e1c2f7b Filter - added FilterWithBuffer typedefs for int32t and uint32 for ease of use 2012-03-28 22:02:52 +09:00
rmackay9 99cdc69110 AP_OpticalFlow - small bug fix to ensure init attempts to read the product id 3 times before giving up 2012-03-28 22:00:57 +09:00
Michael Oborne ab16a33313 APM Planner 1.1.58
add read delay on write for serial
add tlog to gpx creation
fix issue 583 - georef image with a tlog
2012-03-28 20:45:16 +08:00
Andrew Tridgell 972bdcfa39 SITL: add magnetic field noise to the simulated compass 2012-03-28 20:55:27 +11:00
Andrew Tridgell dc127fe749 SITL: ensure we don't run the sitl timer twice
this caused problems with random()
2012-03-28 20:55:27 +11:00
Andrew Tridgell 2a011578f9 Compass: implement noise resistant varient of offset learning
This adds a large amount of noise robustness to the compass offset
learning algorithm, at a cost of 120 bytes of memory. The changes are
based on a long discussion with Bill Premerlani.
2012-03-28 20:55:27 +11:00
Michael Oborne c3a82247d3 firmware build 2012-03-27 13:16:48 +08:00
Andrew Tridgell 491b73c4e2 APM: increase ArduPlane version to 2.31 2012-03-27 16:13:29 +11:00
Andrew Tridgell 8ccf3a05f0 Mavlink: fixed warnings about limits on int32 values 2012-03-27 15:37:25 +11:00
Andrew Tridgell 409c147ce3 ACM: fixed heli build 2012-03-27 15:37:25 +11:00
Andrew Tridgell 5d7c571fb1 ACM: fixed the build on the 1280 2012-03-27 15:37:24 +11:00
Andrew Tridgell 16f094a1c5 ADC: minor fix to the ADC Ch6() code
we don't need to add count any more, as floating point maths doesn't
need to round up
2012-03-27 15:37:24 +11:00
Andrew Tridgell 3a325541f6 APM: enable the new offset nulling in APM 2012-03-27 15:37:24 +11:00
Andrew Tridgell 4821eb4807 ACM: enable the new compass offset nulling in ACM 2012-03-27 15:37:24 +11:00
Andrew Tridgell a3d3dd86cf Compass: implement Bills new offset nulling algorithm
this seems to work much better than the old algorithm, converging
faster and more accurately. Even better, it has no linkage to DCM, so
no possibility of nasty feedback effects
2012-03-27 15:37:24 +11:00
Michael Oborne aea780e5ea APM Planner 1.1.57
fix antenna tracker issue with saved settings
add pretyping to config list
add rawlogs
modify mavlink log graph interface. 2 x yaxis & roll,pitch,yaw now in degs
update dataflash log format - thanks randy
update google earth interface refresh to 0.3 sec
2012-03-26 18:21:49 +08:00
rmackay9 cf1a6f8ab8 APM_RC - moved Force_Out0_Out1, Force_Out2_Out3 and Force_Out6_Out6 to APM_RC parent class because it's already implemented in the APM1 and APM2 child classes anyway 2012-03-25 21:13:31 +09:00
rmackay9 2324be7e68 Filter - added simple LowPassFilter (simple but it's possible to make errors with simple stuff too so might as well have one) 2012-03-25 16:15:25 +09:00
rmackay9 bdda74fd28 Filter - remove obsolete warning from comments re alloc/malloc dangers 2012-03-25 16:14:07 +09:00
rmackay9 441413f1c6 ArduCopter - added PID log type. Implemented for Yaw stabilize and rate controllers. 2012-03-25 16:09:08 +09:00
Michael Oborne 0451da1d43 firmware build 2012-03-25 08:27:31 +08:00
Michael Oborne 80af415dc5 firmware build 2012-03-25 08:22:09 +08:00
rmackay9 eb55234809 ArduCopter - updated firmware version to 2.5.3 2012-03-25 09:13:51 +09:00
rmackay9 dc58c8a905 AP_Baro - change data type size of temperature's average filter to int32_t (was int16_t) 2012-03-24 23:21:11 +09:00
rmackay9 766abb8e6c AP_OpticalFlow - resolved compile error in example sketch (it could not find DCM.h but it's not required anyway) 2012-03-24 14:47:21 +09:00
rmackay9 1f253c5217 ArduCopter - altitude hold - ensure throttle_avg is initialised from g.throttle_cruise parameter 2012-03-23 23:48:24 +09:00
rmackay9 19981d4864 ArduCopter - updated to firmware version to 2.5.2 to avoid confusion with post 2.5.1 versions posted to downloads area 2012-03-23 23:12:49 +09:00
Robert Lefebvre 872ec65afa Fix Auto_Trim to allow it to actually be called when setup on Ch7 pulldown menu in MP. 2012-03-23 09:17:58 -04:00
Michael Oborne c0a381f10b APM Planner 1.1.56
add ardutracker support
add load/save setting in Tracker
move getserialports to serial class
hopefully fix dtr issue for good.
2012-03-23 20:52:12 +08:00
Andrew Tridgell 0b94b2e470 pysim: implement partial 3D acceleration support
The simulator flies very badly when using the full acceleration
code. I don't yet know if this is a bug in the simulation or a problem
with AHRS not handling acceleration for multicopters.

For now set the acceleration to be half a 'pure gravity' acceleration
and half from the full 3D calculation.
2012-03-23 16:48:52 +11:00
Andrew Tridgell 477b31fb0d Math: added mul_transpose() operation
this is equivalent to multiplying by m.transposed(), but is more
efficient
2012-03-23 16:48:52 +11:00
Andrew Tridgell c020030620 pysim: added experimental acceleration support 2012-03-23 16:48:52 +11:00
Jason Short 74893f6959 Throttle_hold was in APM_Config - which is ignored by the Mission planner Hex generator 2012-03-22 10:01:24 -07:00
Chris Anderson 90cafe216c Merge branch 'master' of https://code.google.com/p/ardupilot-mega 2012-03-22 07:37:29 -07:00
Andrew Tridgell ccfac19cef pysim: update the multicopter simulator with correct acceleration
this re-works the multicopter simulator in terms of rotation matrices,
and adds full acceleration support, which means it will include linear
acceleration affects and centripetal acceleration
2012-03-22 23:00:45 +11:00
Andrew Tridgell 21c8351f2f pysim: added rotmat.py
this is a python library for rotation matrices, following the
conventions in AP_Math
2012-03-22 23:00:45 +11:00
Andrew Tridgell 1b3a7d47bd AHRS: fixed build of AHRS example 2012-03-22 23:00:45 +11:00
rmackay9 be22deb56f ArduCopter - motors_quad.pde - corrected test sequence for + configuration 2012-03-21 22:04:50 +09:00
Michael Oborne 07cb15ec42 APM Planner 1.1.55
fix issue 573
fix issue 572
fix issue 571
fix issue 570
fix issue 564
fix issue 560
fix issue 555
fix issue 536
add CH6_LOITER_RATE_D
fix joystick axis 5-8 - can use joystick for camera pan/tilt
2012-03-21 20:13:08 +08:00
Andrew Tridgell fb9790e1f4 Math: moved matrix multiple operations to .cpp file
this means we only link this in once, rather than for every use of
matrix multiply, which saves us some flash space

We need to be careful not to put large pieces of code in template
headers, as if the operation is used a lot, it costs us a lot of code
space
2012-03-21 10:43:48 +11:00
Andrew Tridgell ece2aac4b9 Math: fixed the build of the eulers test in SITL 2012-03-21 10:41:55 +11:00
Andrew Tridgell 491def2b7e autotest: fixed the declination to match new compass
we now use the declination for Canberra
2012-03-21 10:41:55 +11:00
Andrew Tridgell e93b31c76b SITL: improve the simulated compass
this implements a much more accurate model of a compass using matrix
rotations, instead of trying to calculate components directly
2012-03-21 10:41:55 +11:00
Chris Anderson f9f7be832f Merge branch 'master' of https://code.google.com/p/ardupilot-mega 2012-03-20 07:42:54 -07:00
rmackay9 7dc18b53ad ArduCopter - navigation - corrected comment in check_missed_wp function to clarify that you've passed the waypoint when the direction to the way point is more than 100 degrees off (not 10 degrees off) from your original bearing towards the waypoint 2012-03-20 17:11:22 +09:00
rmackay9 198ac97914 ArduCopter - updated version to 2.5.1 2012-03-20 17:08:18 +09:00