Randy Mackay
0f6762bbd2
Copter: PSC_ACCZ param name shortened
2018-01-31 08:48:21 +09:00
Andrew Tridgell
89674482a7
Copter: added FLTMODE_CH parameter
...
this allows for the flight mode to be on any RC channel, or no channel
at all to disable RC flight modes
2018-01-27 12:01:35 +09:00
Pierre Kancir
cfc69214e6
Copter: add LAND_ALT_LOW parameter
2018-01-24 21:14:35 +09:00
Randy Mackay
8d6f8e4d9c
Copter: move pos-control pids to pos-control library
2018-01-23 12:00:43 +09:00
Randy Mackay
6546ccbb3f
Copter: velocity pi moved to position control library
2018-01-23 12:00:43 +09:00
Dylan Herman
20fe5bb98f
Copter: add SmartRTL failsafe action
...
Adds SmartRTL or RTL and SmartRTL or Land failsafe options for batt, throttle, and GCS failsafes
2018-01-22 10:54:28 +09:00
Randy Mackay
0ac708b5a0
Copter: remove ability to disable PosHold flight mode
...
This flight mode is stable and regularly used so it is unlikely that we ever want to disable it
2017-12-12 10:39:26 +09:00
Andrew Tridgell
311d7c11e4
Copter: added LOITER option in THROW_NEXTMODE
2017-11-27 14:14:06 +09:00
ChrisBird
caaeae3d0a
Copter: Separate max ascent and descent speeds
...
Added equivalent parameters to WPNAV_SPEED_UP and WPNAV_SPEED_DN
New parameters named:
PILOT_SPEED_UP (technically renamed PILOT_VELZ_MAX)
PILOT_SPEED_DN
Removed parameter PILOT_VELZ_MAX (technically renamed to PILOT_SPEED_UP).
Flight Modes impacted:
ALTHOLD
AUTOTUNE
CIRCLE
LOITER
POSHOLD
SPORT
TAKEOFF
Update a section in GUIDED mode but I don't think it is ever used but update just in case.
It will use the PILOT_SPEED_UP for ascending max velocity. For down it will check if
it is 0, if so then it will PILOT_SPEED_UP instead, if non zero it will use PILOT_SPEED_DN.
This retains current behavior and gives the flexibility to change it if desired.
2017-11-09 09:03:54 +09:00
Randy Mackay
787954fa37
Copter: integrate winch library
...
fixes after peer review:
rename winch-disable to winch-relaxed
add DO_WINCH to do-verify
winch release-length accepts rate
2017-10-27 09:20:38 +09:00
Andrew Tridgell
e2f710523e
Copter: added inverted flight to switch docs
2017-10-03 10:16:41 +11:00
Randy Mackay
44a436642b
Copter: complete rename to SmartRTL
...
Also fix parameter description for CH7_OPT
2017-09-15 08:58:14 +09:00
squilter
4b57a4a231
Copter: rename SafeRTL to SmartRTL
2017-09-09 14:05:41 +09:00
squilter
ba0e08552f
Copter: add SafeRTL flight mode
2017-09-09 14:05:41 +09:00
squilter
00ace08b54
Copter: minor formatting fixes
2017-08-30 20:07:11 +09:00
Peter Barker
0b6de644fb
Copter: add ArduSub to list of SYSID_SW_TYPE
2017-08-24 19:50:38 +09:00
Peter Barker
c6b9c84d1f
Copter: remove CLI
2017-08-14 10:23:50 +09:00
Andrew Tridgell
7473471f38
Copter: reverse IDs in g2 for TCAL and tx_type
...
as discussed with Randy
2017-07-10 17:07:57 +10:00
Peter Barker
d9b45cc202
Copter: create GCS subclass, use inheritted methods
2017-07-07 16:18:37 +01:00
Eugene Shamaev
24c390ade0
ArduCopter: move of CAN parameters into separate group
2017-07-03 11:44:32 +01:00
Randy Mackay
41752eef8b
Copter:default RC_FEEL to 50
2017-07-03 09:34:07 +09:00
Dr.-Ing. Amilcar Do Carmo Lucas
f8aa91681e
Copter: Improve the PWM parameters descriptions
2017-06-06 11:06:26 +10:00
Leonard Hall
c61d0a7373
Copter: reduce RC_FEEL default to 25
2017-06-01 10:06:20 +09:00
murata
1a76c28655
Copter: add dodeca-hexa
2017-05-27 14:21:13 +09:00
Randy Mackay
70ed572476
Copter: minor formatting fix
...
This is mostly just to trigger compilation of the latest beta
2017-05-25 17:53:20 +09:00
Dr.-Ing. Amilcar Do Carmo Lucas
f366095113
Copter: Use SI units conventions in parameter units
...
Follow the rules from:
http://physics.nist.gov/cuu/Units/units.html
http://physics.nist.gov/cuu/Units/outside.html
and
http://physics.nist.gov/cuu/Units/checklist.html
one further constrain is that only printable (7bit) ASCII characters are allowed
2017-05-17 18:07:25 +10:00
Dr.-Ing. Amilcar Do Carmo Lucas
60aeade0f4
Copter: Add missing @RebootRequired: True
2017-05-15 21:51:16 +09:00
Randy Mackay
1a246851fc
Copter: enable radio failsafe by default
2017-04-24 17:07:42 +09:00
Randy Mackay
713c08672f
Copter: integrate AP_VisualOdom
2017-04-19 11:04:40 +09:00
Randy Mackay
7478ae9eb4
Copter: TUNE parameter description fixes
2017-04-08 15:35:05 +09:00
Andrew Tridgell
6bb5c16fb8
Copter: allow for HELI_DUAL configurations
2017-03-25 16:22:10 +11:00
Jacob Walser
353202e03c
Copter: Fix parameter metadata
2017-03-22 16:16:26 -07:00
Randy Mackay
e8c5612587
Copter: fix reference to PosControl param descriptions
...
No functional change
2017-03-01 14:59:44 +09:00
Randy Mackay
627e3faf41
Copter: fix SYSID_ENFORCE parameter description
2017-02-28 15:06:51 +09:00
Randy Mackay
34726208b2
Copter: clarify CHX_OPT avoidance and adsb-avoidance
2017-02-27 15:18:23 +09:00
Andrew Tridgell
6b6d03eb8d
Copter: fixed upgrade of parameters
...
now that we dynamically allocate many key objects in copter we need to
move the parameter upgrade code to after when the objects are allocated
2017-02-15 15:02:06 +10:00
Andrew Tridgell
d8972d5344
Copter: setup frame type parameter flags
2017-02-14 19:50:01 +11:00
Peter Barker
f49f153da0
Copter: rename gcs[] to gcs_chan[]
...
Wish to use gcs() to return the gcs singleton
2017-02-13 09:32:01 +11:00
Peter Barker
b7f982d7ce
Copter: support for arming and disarming using an auxsw
2017-02-06 16:48:50 +09:00
Andrew Tridgell
00711f5a98
Copter: fixed typo in param generation
2017-02-06 15:36:52 +11:00
Andrew Tridgell
79b23dff0e
Copter: fixed parameter path
2017-02-06 15:12:32 +11:00
murata
8f926bd177
Copter: Unify from print or println to printf.
2017-01-27 18:20:22 +11:00
Peter Barker
4ea6cf4ce3
Copter: transfer old ARMING_CHECK value to new location
2017-01-17 11:45:08 +09:00
Peter Barker
bd6ffc025e
Copter: start conversion to AP_Arming_Copter
2017-01-17 11:45:08 +09:00
Andrew Tridgell
1297a7dedb
Copter: convert the rest of motors class for tricopter
2017-01-12 17:39:37 +11:00
Andrew Tridgell
7aee3500e1
Copter: added conversion of tricopter tail servo parameters
2017-01-12 17:39:37 +11:00
Andrew Tridgell
a3220944d8
Copter: make conversion tables constant
2017-01-12 17:39:37 +11:00
Andrew Tridgell
6a12ed0d65
Copter: upgrade heli servo parameters
2017-01-12 17:39:37 +11:00
Andrew Tridgell
c0c25e0588
Copter: fixed parameter doc paths
2017-01-12 17:39:37 +11:00
Andrew Tridgell
e85df47b06
Copter: fixed parameter handling for pointer objects
...
fixed loading of default files and use of POINTER flag on object
groups
2017-01-12 17:39:37 +11:00
Andrew Tridgell
3c1517f583
Copter: added automatic SRV_Channel parameter upgrade
2017-01-12 17:39:37 +11:00
Andrew Tridgell
5a87ae3f01
Copter: use new SRV_Channels API
2017-01-12 17:39:37 +11:00
Peter Barker
a233024e05
Copter: fix compilation when fence andd proximity are disabled
...
This adds AC_AVOID_ENABLED; avoidance must be disabled if either
of fence or proximity are disabled.
Parameter definitions have been reordered to avoid compiler warnings;
this make sthe numbering non-linear
2017-01-03 10:44:03 +09:00
Randy Mackay
d011783d76
Copter: fix FRAME_TYPE param description
2016-12-31 10:55:23 +09:00
Randy Mackay
12d024e0c6
Copter: rename FRAME to FRAME_TYPE
...
This unifies the plane and copter parameter names
2016-12-31 10:55:23 +09:00
Randy Mackay
0ac00dbfd6
Copter: add FRAME_CLASS parameter
2016-12-31 10:55:23 +09:00
Randy Mackay
38478638de
Copter: aux switch for enable/disable proximity based avoidance
2016-12-20 19:48:02 +09:00
Randy Mackay
a43229de0f
Copter: fix z-axis accel parameter description
2016-12-19 17:01:06 +09:00
Andrew Tridgell
c3b9dbf5c8
ArduCopter: Add EKF3 and remove EKF1
2016-12-19 08:07:09 +11:00
Randy Mackay
a2474667a8
Copter: minor formatting fix
...
no functional change
2016-12-14 13:22:24 +09:00
Randy Mackay
21c7ea1df7
Copter: integrate AP_Beacon
2016-11-30 17:56:55 +09:00
murata
f7273d0e93
Copter: Change from printf statement to print, println statement.
2016-11-26 00:02:11 +00:00
Peter Barker
e72f5a6240
ArduCopter: enable/disable precision loiter on a switch
...
A switch MUST be assigned for precision loiter to be enabled
2016-11-18 09:41:56 +09:00
Peter Barker
236b8ab6b7
Copter: make EPM a subclass of AP_Gripper_Backend
2016-11-05 10:20:39 +09:00
Peter Barker
920868145c
Copter: support for AP_Gripper
2016-11-05 10:20:33 +09:00
Peter Barker
df07cb525a
Copter: use AP_Stats to store statistics about vehicle
2016-10-29 14:53:25 +09:00
Mathieu OTHACEHE
152edf7189
Global: remove mode line from headers
...
Using a global .dir-locals.el file is a better alternative than
reincluding the same emacs header in every file of the project.
2016-10-24 09:42:01 -02:00
Randy Mackay
83b8208b8b
Copter: fix PRX_ parameters duplicate underscore in param name
2016-10-19 17:24:43 +09:00
Andrew Tridgell
5a9276a5c4
Copter: added SYSID_ENFORCE parameter
...
allows enforcement of SYSID_MYGCS
2016-10-15 17:14:19 +11:00
Leonard Hall
5c47f3f9e5
Copter: add acro throttle and yaw expo and smoother manual pilot throttle
2016-10-15 11:27:53 +09:00
Randy Mackay
0aab175051
Copter: move proximity to g2
2016-10-14 14:02:29 +09:00
Randy Mackay
fcc2a1b378
Copter: integrate AP_Proximity into main vehicle
2016-10-13 20:21:07 +09:00
John deVere
d89b82b69f
Copter: fixed parameter description typos
2016-09-14 14:05:47 -07:00
Randy Mackay
9b1b18b15b
Copter: add sprayer to aux switch options
2016-09-13 17:34:15 +09:00
Randy Mackay
a8f0291711
Copter: parameter conversion only for matrix multicopters
...
Single, Coax and Tri copter rate parameter conversions were incorrect
2016-09-13 09:44:38 +09:00
Andrew Tridgell
d0dd10aeea
Copter: added DEV_OPTIONS parameter
...
this is for little used options to allow standard firmware builds to
enable those options for development purposes
First option is for MAVLink based ADSB avoidance
2016-09-12 16:24:34 +10:00
Randy Mackay
cba480d02b
Copter: add auto calibration to ESC_CAL parameter description
...
No functional change
2016-08-31 11:53:53 +09:00
Randy Mackay
e17c8ac851
Copter: remove non-working reset-to-armed-yaw
...
Arguably we should make this work, but until that happens we should not present the option on the auxiliary switches
2016-08-29 16:34:24 +09:00
Randy Mackay
eded2dee23
Copter: TELEM_DELAY parameter range to 30sec
...
No functional change
2016-08-29 15:29:05 +09:00
khancyr
1a1c749501
Copter: fix typo in parameters.cpp
2016-08-26 14:28:35 +09:00
Andrew Tridgell
f18e0dadc9
Copter: added optional AdvancedFailsafe for copter and heli
2016-08-25 14:14:18 +10:00
Andrew Tridgell
89c10a2db9
Copter: rename WP_TKOFF_NAV_ALT to WP_NAVALT_MIN
...
this is in preparation for using the same parameter for landing as
well
2016-08-16 11:26:56 +10:00
Randy Mackay
9842840346
Copter: GND_EFFECT_COMP parameter to enable ground effect compensation
2016-08-09 13:31:36 +09:00
chambana
25940c8e0f
Copter: add THROW_TYPE and allow dropping vehicle to trigger motors
2016-08-02 20:25:52 +09:00
Randy Mackay
f0f87a2f0c
Copter: add throw_nextmode
...
vehicle switches to mode specified in THROW_NEXTMODE parameter after the
throw is completed.
2016-08-02 20:25:52 +09:00
Randy Mackay
1161417d7f
Copter: add GUIDED_NOGPS flight mode
...
This mode is a cut down version of Guided mode that only accepts attitude commands.
This mode does not require a GPS lock
2016-08-02 18:25:59 +09:00
Randy Mackay
d50987f976
Copter: avoidance_adsb implements copter avoidance using ADSB
2016-07-25 20:24:37 +09:00
Andrew Tridgell
cb5ca713a9
Copter: added AP_Button support
2016-07-22 15:01:20 +10:00
Francisco Ferreira
25fefe77b7
Copter: add AP_Rally_Copter
...
override default is_valid method so we can check if rally point is inside the fence, if it isn't we ignore it
2016-07-22 09:00:18 +09:00
Andrew Tridgell
3a8ed06267
Copter: added TKOFF_NAV_ALT parameter
...
this adds TKOFF_NAV_ALT which controls the altitude above takeoff that
navigation can begin. It is meant for unstable vehicles such as helis
to prevent blade strike during initial takeoff.
This also adds a new parameter class ParametersG2 which can hold 64
parameters. This is to avoid running out of parameters in the first
256 block
2016-07-07 14:21:47 +09:00
Peter Barker
043b1d321d
Copter: remove paths for documenation for non-multi frame
...
Our current documentation system only emits one XML document (apm.pdef.xml)
for ArduCopter.
Since there is a conflict between parameters in the MOT_ namespace in Copter,
we only emit the documentation for the first parameter defining the MOT_ namespace.
This patch removes the documentation lines for frame types other than multicopter, meaning the documentation will reflect mutlictopter usage - the most common case.
These lines will need to be reinstated when we change the way we produce the xml documentation.
2016-06-24 09:55:28 +09:00
Peter Barker
7742503ef3
Copter: include AC_AttitudeControl parameter documentation
2016-06-24 09:55:26 +09:00
Daniel Ricketts
87be8daf0e
Copter: integrate AC_Avoidance library
2016-06-22 11:38:15 +09:00
Randy Mackay
901e8cc23f
Copter: convert THR_MIN to MOT_SPIN_MIN, THR_MID to MOT_THST_HOVER
2016-06-18 11:55:49 +09:00
Leonard Hall
48eb4cf674
Copter: remove THR_MID
2016-06-18 11:55:49 +09:00
Leonard Hall
dec9323127
Copter: remove THR_MIN
...
Equivalent is AP_Motors SPIN_MIN
2016-06-18 11:55:49 +09:00
Peter Barker
1fc4063117
Copter: correct TERRAIN_FOLLOW parameter comments
2016-06-08 17:35:20 +09:00
Randy Mackay
2815af81ad
Copter: rename RTL_CONE_SLOPE_DEFAULT definition
...
Also tiny formatting fix
2016-05-31 12:20:21 +09:00
Randy Mackay
be3b1cb6ab
Copter: convert STB_ params to ATC_ANG_
2016-05-28 15:45:30 +09:00
Randy Mackay
7689315ba2
Copter: rename sonar to rangefinder
2016-05-21 10:36:53 +09:00