Pierre Kancir
7a5a7b1eb5
CI: add examples test
2021-03-03 18:07:38 +11:00
Andy Piper
46c5d72166
Tools: add bdshot bootloaders for CubeYellow and mRoControlZeroH7
2021-03-03 18:02:26 +11:00
Peter Barker
b3ee5d5f59
autotest: increase verbosity in AHRS2 test
2021-03-03 16:29:33 +11:00
Peter Barker
5a49d98555
Tools: have decode_watchdog try to decode from .log dataflash dumps
2021-03-03 13:38:12 +11:00
Randy Mackay
a35a7e1523
Tools: autotest manual control test requires 12 deg
...
adjusted down because of lower default angle_max
2021-03-03 08:03:39 +09:00
Peter Barker
317181922c
autotest: ensure we're getting vaguely sane data in AHRS2 message
2021-03-02 20:48:36 +11:00
Peter Barker
cc83562add
autotest: tidy fence handling
2021-03-02 16:54:06 +11:00
Peter Barker
b2d4cefa85
autotest: change heli default RPM type to 10
...
Change default to SITL
2021-03-02 15:41:44 +11:00
Peter Barker
4d2cf8c95b
AP_Frsky_SPort: correct handling of RPM sensor data
...
Nails support down to just two RPM sensors for the time being.
Simplifies things (there was an issue here when I corrected RPM-in-SITL)
2021-03-02 15:41:44 +11:00
Peter Barker
eb499ff731
autotest: improve frsky SPort test
...
- reduces verbosity as we only check the remaining items when new data
received
- reduces repoll interval and explains why we need to re-poll
2021-03-02 15:41:44 +11:00
Peter Barker
7b251b6fd4
autotest: add diagnostics for frsky tests
2021-03-02 15:41:44 +11:00
Peter Barker
2671a2f71f
autotest: fix up FRSky tests for running under Valgrind
2021-03-02 15:41:44 +11:00
Peter Barker
360512f6b0
autotest: preserve commandline customisations on reboot under valgrind
2021-03-02 15:41:44 +11:00
Peter Barker
fc9a93ba67
autotest: stop using mavproxy for clearing missions
2021-03-02 14:24:36 +11:00
Peter Barker
97e2596bf8
autotest: stop clearing mission at start of test
...
These are implicitly cleared by the framework
2021-03-02 14:24:36 +11:00
Peter Barker
973510a4ff
autotest: push context after customising cmdline
...
doing things in the other order causes problems when running the
complete suite
2021-03-02 14:24:36 +11:00
Peter Barker
5d1e105534
autotest: allow more time for mission upload and download
...
We upload some rather large missions....
2021-03-02 14:24:36 +11:00
Peter Barker
10007e2e42
autotest: load missions natively rather than using MAVProxy
2021-03-02 14:24:36 +11:00
Peter Barker
993d87469c
autotest: move mission upload functions from rover to common
2021-03-02 14:24:36 +11:00
Peter Barker
34a52e9cfe
autotest: use wait_statustext in place of mavproxy.expect for autorotate test
2021-03-02 13:34:09 +11:00
Rishabh
6e2339d2d6
Tools: default parameters for Hexsoon TD-650
2021-03-02 10:13:51 +09:00
Peter Barker
0daa1a63d3
autotest: remove pointless fetch_parameters call
...
And the entire method, replace with equivalent test
2021-03-01 17:27:52 +11:00
nkruzan
3e0f9ab4e7
Tools:autotest\common.py fix text typo
2021-03-01 15:15:38 +11:00
Peter Barker
61138f342a
autotest: do not time out receiving of heartbeat if running gdb
...
pausing indefinitely when running GDB is OK.
2021-03-01 13:44:23 +11:00
Peter Barker
1f47698076
autotest: use change_mode in place of mavproxy.send
2021-03-01 13:10:09 +11:00
Andrew Tridgell
97e7b48ca1
Tools: rebuild DrotekP3Pro bootloader
2021-02-28 17:24:25 +11:00
Andrew Tridgell
0528414a9c
AP_Bootloader: limit the 1M flash check to the F427
...
this fixes an issue with the DrotekP3Pro which uses the STM32F469
2021-02-28 17:24:25 +11:00
Andrew Tridgell
b137f9e319
waf: fixed embed error on python2
2021-02-26 10:59:09 +11:00
bugobliterator
6d25b02508
waf: need to crc the padded bootloaders before embedding
2021-02-26 10:59:09 +11:00
Peter Barker
d3b3c443bc
autotest: reset copter completely after autotune test
2021-02-25 10:49:58 +11:00
Andrew Tridgell
98abe125ad
Tools: rebuild IO firmware
...
we now have enough memory again
2021-02-24 18:21:08 +11:00
Peter Barker
013415eb31
autotest: make and mark arducopter.py as flake8-compliant
2021-02-24 15:10:10 +11:00
Andrew Tridgell
b012c472e1
waf: added crc to embedded data
2021-02-23 20:20:07 +11:00
Peter Barker
79f21ed639
autotest: add test for GSF logging
2021-02-23 12:36:33 +11:00
Peter Barker
9d681eecc4
autotest: move to state outside when we leave log structure
...
No vertical whitespace allowed in the structures...
We concatenate all of the LogStructure files; without this we remain in
state_inside and try to parse every line in the concatenation as if it
were a log structure definition
2021-02-23 12:36:33 +11:00
Andrew Tridgell
20da92c8a1
Tools: revert IO firmware
...
this is a temporary fix until the full cause of the IOMCU issue is
found
2021-02-22 19:52:05 +11:00
Peter Barker
4d9cfdaaa8
Vagrant: create a bionic64-desktop VM
...
The focal-desktop appears to have a problem where directories are
considered to be in-use when being deleted. Not reproduced by me, but
reliably by a Windows user.
2021-02-22 15:00:38 +11:00
Andy Piper
fa1bed9735
Tools: rebuild iomcu firmware
2021-02-22 07:07:43 +11:00
Peter Barker
44ec74030e
autotest: recover from flip in althold to remove stabilise throttle problem
2021-02-21 23:11:26 +11:00
Peter Barker
a4a5d52c35
autotest: extend time allowed for RTL for simplemode test
2021-02-21 22:45:06 +11:00
Peter Barker
9120882e9e
autotest: print name of open dataflash log when test exception caught
...
The stack trace is already extremely useful... but mapping back to the
relevant dataflash log is a bit of a pain.
Adding more stuff to this method in the future might be good, too.
2021-02-21 21:35:35 +11:00
Peter Barker
adf44f3b2b
autotest: make and declare sim_vehicle.py flake8-clean
2021-02-21 21:35:17 +11:00
Peter Barker
98451e499a
autotest: make and declare balancebot flake8-clean
2021-02-21 21:35:17 +11:00
Peter Barker
b5f490aff4
autotest: make fly_proximity_avoidance_test_alt_no_avoid more reliable
2021-02-21 17:44:10 +11:00
Andy Piper
94de238751
AP_HAL_ChibiOS: disable RCOUT thread on iomcu and rebuild iomcu.
2021-02-20 14:37:11 +11:00
Peter Barker
d4aef2dba8
autotest: stop using MAVProxy to change mode
2021-02-20 00:03:24 +11:00
Peter Barker
05c9b79a5e
autotest: make and declare quadplane.py flake8-clean
2021-02-20 00:02:33 +11:00
Peter Barker
c13d229877
autotest: use self.set_current_waypoint rather than "wp set" to set current wp
2021-02-19 12:25:40 +11:00
Peter Barker
148e2e751f
autotest: add set_current_waypoint
2021-02-19 12:25:40 +11:00
Peter Barker
b7044d3708
autotest: remove use of global expect_list
2021-02-18 18:18:30 +11:00