Commit Graph

951 Commits

Author SHA1 Message Date
Andrew Tridgell 8e5c0fa32b AP_InertialSensor: disable kill IMUs with HAL_MINIMIZE_FEATURES 2019-07-07 19:03:01 +10:00
Andrew Tridgell 09d3392aee AP_InertialSensor: zero accumulators on time step
this zeros the delta angle and delta velocity accumulators when a
sensor is unavailable for a period of 0.1s. This prevents garbage
values being passed into the EKF when a sensor dies and then becomes
available again some time later
2019-07-07 19:03:01 +10:00
Andrew Tridgell 3444e82ef9 AP_InertialSensor: added RC switch for killing IMUs 2019-07-07 19:03:01 +10:00
Andrew Tridgell 053f0cb689 AP_InertialSensor: try much harder to get all IMU samples
this we ensures we get new data for all active IMUs on each loop,
rather than sometimes returning with some IMUs not having data.

This matters as not having a sample on an IMU for a single loop can
cause an EKF IMU failover, which will degrade the learned bias
variances

The issue is usually only seen under high load, such as requesting a
loop rate beyond what the hardware is capable of
2019-07-07 19:03:01 +10:00
Andy Piper 31ea3466af AP_InertialSensor: Post-filter logging takes precedence over sensor-rate logging. 2019-06-06 17:09:17 +10:00
Andy Piper 36878e9b3c AP_InertialSensor: Allow all filter frequencies to be 16bit. 2019-06-06 17:09:17 +10:00
Andy Piper fff81a2163 AP_InertialSensor: Make sure the LPF output is used by the notch input. 2019-06-06 17:09:17 +10:00
Andy Piper 18d403c3ac AP_InertialSensor: Rework notch filter allocation and sampling
https://github.com/ArduPilot/ardupilot/issues/11346

Allocate a notch filter per-IMU.
Update the notch filters in the backend at the sensor sample rate.
Allow raw logging of post-filtered gyro and accel values.
2019-06-06 17:09:17 +10:00
Andrew Tridgell aef343bfd0 AP_InertialSensor: removed old mRoControlZeroF7 config 2019-05-30 15:39:57 +10:00
Andrew Tridgell 039e7366b0 AP_InertialSensor: support new sensor config setup 2019-05-30 15:39:57 +10:00
Andrew Tridgell 3823ba539c AP_InertialSensor: rename to EXPECT_DELAY_MS() 2019-05-15 15:33:48 +10:00
Andrew Tridgell 02326ac52c AP_InertialSensor: use EXPECT_DELAY() macro 2019-05-15 15:33:48 +10:00
Andrew Tridgell 4e769730c9 AP_InertialSensor: removed unusued AP_Common/Semaphore.h 2019-05-15 15:33:48 +10:00
Phillip Kocmoud 6665e4c0a7 AP_InertialSensor: probe IMUs for mRoControlZeroF7 2019-05-10 15:05:42 +10:00
Andrew Tridgell 893b49d145 AP_InertialSensor: disable register checking in invensensev2 driver
register checking doesn't work for the banked registers used in the
invensensev2 register layout. It ends up setting the wrong register
value in some cases, which can either cause the sensor to stop working
or in the worst case give bad data
2019-05-10 14:55:39 +10:00
Jaaaky 47c65314fb AP_InertialSensor: fix accelcalsimple watchdog 2019-05-01 14:23:20 +10:00
Andrew Tridgell 034d476fa5 AP_InertialSensor: prevent watchdog in accelcal 2019-04-22 16:53:35 +10:00
Andrew Tridgell 9c48d001ac AP_InertialSensor: skip gyro cal on watchdog reset 2019-04-22 16:53:35 +10:00
Andrew Tridgell c988eb2fd9 AP_InertialSensor: don't set INS_ENABLE_MASK to found IMU mask 2019-04-22 14:56:59 +10:00
Andrew Tridgell c7ed4bfbcc AP_InertialSensor: allow testing of IMU failure 2019-04-22 14:56:42 +10:00
Randy Mackay 9fa742e1be AP_InertialSensor: fix compiler warning in BMI088 driver 2019-04-11 10:32:51 +09:00
Peter Barker e0fc73776c AP_InertialSensor: return floats from raw-sample-rate getters
The underlying type changed at some stage but the getters did not
2019-04-09 10:02:16 +10:00
Andrew Tridgell fa63243eb0 AP_InertialSensor: added BMI088 accel config retry 2019-04-08 19:58:12 +10:00
Peter Barker ef860db558 AP_InertialSensor: add floating point constant designators 2019-04-05 23:04:17 -07:00
Michael du Breuil c7a9e8bf93 AP_InertialSensor: Fix implicit include of AP_Logger 2019-04-05 20:12:53 +11:00
L Kurt Shaw d08ab88dea INS: AP_InertialSensor comments for new cubes
Correct comments ICM20648 should have been ICM20948
2019-04-02 10:52:43 +11:00
Tom Pittenger 3eeaa2c8df AP_InertialSensor: rename dataflash to logger 2019-03-28 16:40:57 +11:00
na 494a3f86ad AP_IntertialSensor: support ICM20601 IMU 2019-03-28 09:15:27 +11:00
Randy Mackay 5d8747c81d AP_InetialSensor: fixup ENABLE_MASK parameter desc 2019-03-27 13:14:48 +09:00
Andrew Tridgell 4a334d0ed7 AP_IneertialSensor: fixed startup race in SITL 2019-03-21 18:54:32 +11:00
Andrew Tridgell 0a718ba330 AP_IneertialSensor: fixed orientations and gyro scale factors for new Invensense IMUs 2019-03-21 18:54:32 +11:00
Siddharth Purohit 8c2d3945de AP_IneertialSensor: add support for custom accel scale
adds support for 30g measurement on ICM20649
2019-03-21 18:54:32 +11:00
Siddharth Purohit 3a833d9a90 AP_InertialSensor: fix rotation for ICM20649 2019-03-21 18:54:32 +11:00
Andrew Tridgell 880a55c6a2 AP_InertialSensor: fixes for BMI088 on SPI
The sensor has an unusual SPI interface, with a pad byte on read, and
retries needed on write
2019-03-14 16:10:40 +11:00
L Kurt Shaw 8d75e8c5bb INS: AP_InertialSensor.cpp
Fix typo in comments should be NFC
2019-03-12 15:56:55 +09:00
Andrew Tridgell 81cd103073 AP_InertialSensor: probe for new v2 invensense IMUs
also suppress LSM9DS0 whoami warnings, as these will now be common
with new IMUs

and make 20602 show up as a new devtype so we can distinguish it
2019-03-11 12:40:21 +11:00
Andrew Tridgell dff3ea416c AP_InertialSensor: allow for LSM9DS0 to be used on I2C 2019-03-10 09:03:06 +11:00
Siddharth Purohit 086b4c1cfd AP_InertialSensor: use default value for temperature scale and offset 2019-03-06 20:47:10 +11:00
Siddharth Purohit b76ec8cc11 AP_InertialSensor: fix slave register structure for Invensensev2 2019-03-06 20:47:10 +11:00
Siddharth Purohit 528c0b4d7c AP_InertialSensor: add drivers for register bank based Invensense Sensors 2019-03-06 20:47:10 +11:00
Siddharth Purohit 0cfcd0986e AP_InertialSensor: look for icm20602 for Pixhawk 2 series flight boards 2019-03-06 20:47:10 +11:00
Andrew Tridgell 103af72859 AP_InertialSensor: remove more px4 remnants 2019-02-27 20:32:37 +11:00
Andrew Tridgell 2b285089e9 AP_InertialSensor: widen allowable temp gap on invensense IMUs
some sensors have more temperature noise
2019-02-26 16:18:26 +11:00
Andrew Tridgell 07e2167996 AP_InertialSensor: setup for fmuv6 2019-02-26 16:18:26 +11:00
Tom Pittenger 9347e6d36f AP_InertialSensor: unify singleton naming to _singleton and get_singleton() 2019-02-10 19:09:58 -07:00
Andrew Tridgell 6048c10a7c AP_InertialSensor: added driver for BMI088
setup for 1600 Hz accel sample, 2kHz gyro sample, 24g accel range
2019-01-31 12:05:57 -08:00
Andrew Tridgell 9520f5f768 AP_InertialSensor: removed F4Light 2019-01-21 21:57:21 +11:00
Peter Barker 6fc76a32af GLOBAL: use AP::logger() and strip redundant Log_ from methods 2019-01-18 18:08:20 +11:00
Peter Barker b47733142f GLOBAL: rename DataFlash_Class to AP_Logger 2019-01-18 18:08:20 +11:00
Peter Barker 43e3acc954 AP_InertialSensor: remove use of never-set AP_HAL_PX4 and AP_HAL_VRBRAIN 2019-01-18 09:53:44 +11:00