Andrew Tridgell
10416f92c4
HAL_ChibiOS: set CS pins high while in bootloader
...
this appears to be the root cause of the parameter resets on
CubeOrange. We need to ensure the CS pin is not floating or random
noise on the SPI bus for FRAM can cause the FRAM to become corrupt
2020-05-11 13:48:28 +10:00
E Thomas
c09d6908ed
Enabled active buzzer output on OmnibusNanoV6
2019-09-03 09:59:53 +10:00
Andrew Tridgell
614a059819
HAL_ChibiOS: convert more boards to using new sensor config system
2019-06-05 18:54:40 +10:00
Andrew Tridgell
2b0a30a2c5
HAL_ChibiOS: ensure we don't overflow bootloader area
...
this modifies the ld script to use the maximum size available for the
bootloader, so we can't accidentially grow the bootloader beyond its
max size
2019-05-06 12:36:41 +10:00
Andrew Tridgell
f98bfb1a35
HAL_ChibiOS: enable flash logging on Omnibus and speedybeef4
2019-01-23 09:00:42 +11:00
Nigel Williams
071dca8fe8
HAL_ChibIOS: Fix INS default rotation for OmnibusNanoV6
...
This makes the default orientation match betaflight (i.e. USB
connector top of the board at the front, ESC connector bottom of the
board to the rear).
2019-01-18 11:00:43 +11:00
vierfuffzig
d204939cb2
AP_HAL_ChibiOS: set default type for boards with onboard OSD
2018-11-09 08:12:51 +11:00
rain-er
565b370330
UART4 added for BLHeli ESC telemetry
2018-10-17 13:57:19 +11:00
Hwurzburg
19f44f80ad
HAL_ChibiOS: Added Omnibus F4 NanoV6 (only V6)
...
bench tested all ports
2018-07-30 19:32:29 +10:00
