Andrew Tridgell
142848ee54
Tools: update for changed INS_NOTCH parameter name
2022-04-28 12:56:34 +10:00
Willian Galvani
e5844b7753
Frame_params: Sub: make RNGFND1_TYPE 0 (None)
...
This was causing issues in QGC 4.1 as it was showing an unhealthy
Rangefinder and marking the vehicle as "not ready to fly".
It will be up to the companion computer to set this to 10(Mavlink)
2021-02-11 10:43:50 -08:00
Jacob Walser
e235c379bf
Frame_params: rename bluerov2 4.0 firmware defaults files
...
These files apply to 4.0.0...4.0.2, not only 4.0.2
2021-01-13 12:50:28 -05:00
Willian Galvani
9020c79677
Tools: Frame_params: Sub: fix parameter types
...
These files are consumed by QGroundControl. This means integers
should not have a decimal point.
2021-01-12 11:44:25 -08:00
Jacob Walser
c5ec0cfdee
Frame_params: (BlueRov2/Sub-3.5.1) revert to 19086e34
...
this file is targeted specifically at 3.5.1 firmware
the subsequent contributions reflecting changes to master should
not have been applied
2021-01-07 07:39:59 -08:00
Jacob Walser
4c13a5ae4f
Frame_params: (BlueRov2 Heavy/Sub-3.5.2) revert to 9897ff60
...
this file is targeted specifically at 3.5.2 firmware
the subsequent contributions reflecting changes to master should
not have been applied
2021-01-07 07:39:59 -08:00
Jacob Walser
567c6d4991
Frame_params: (BlueRov2/Sub-3.5.2) revert to 83bb1e7f
...
this file is targeted specifically at 3.5.2 firmware
the subsequent contributions reflecting changes to master should
not have been applied
2021-01-07 07:39:59 -08:00
Jacob Walser
367e7b35de
Frame_params: add defaults for bluerov2 on Sub 3.5.4 firmware
2021-01-07 07:39:59 -08:00
Jacob Walser
3ce9d9eb44
Frame_params: add defaults for bluerov2 on Sub 4.0.2 firmware
2021-01-07 07:39:59 -08:00
Andrew Tridgell
dde940380f
Tools: update param files to not reference GND parameters
2020-12-08 13:22:17 +11:00
Leonard Hall
fb790cadda
Tools: update parameter files after PID upgrade
2019-07-25 17:38:15 +09:00
Michael du Breuil
ec1b6db83b
Tools: Remove BRD_SERIAL_NUM from parameter files
2019-04-08 18:18:32 -07:00
Jacob Walser
9897ff60de
Frame_params: Add BlueROV2 Heavy param file
2018-02-28 13:22:08 -05:00
Jacob Walser
83bb1e7f4a
Frame_params: (BlueROV2/Sub-3.5.2) update tilt servo reversal
2017-11-14 18:10:45 -05:00
Jacob Walser
305f203dd3
Frame_params: (BlueRov2/Sub-3.5.2) Reset to defaults
2017-11-13 21:08:55 -05:00
Jacob Walser
67eefe3d6a
Frame_params: (BlueRov2/Sub-3.5.2) Use integers for APInts
2017-11-13 20:57:43 -05:00
Jacob Walser
acb65b99ac
Frame_params: add file for BlueROV2 on Sub 3.5.2
2017-11-13 15:42:04 -05:00
Jacob Walser
19086e34f0
Frame_params: update BlueROV2 defaults for 3.5.1
2017-08-30 17:49:34 -04:00
Jacob Walser
1a52acc99e
Frame_params: Remove calibration parameters from bluerov2 standard
2017-05-27 11:30:56 -04:00
Jacob Walser
193e590592
Frame_params: add standard bluerov2 parameter file
2017-05-27 11:30:56 -04:00