a9c570702c
AP_Param: fixed build warning
2018-07-09 19:41:18 +10:00
1a45aa12f5
AP_Param: warn on last pass only about unknown parameters
...
Do not warn about unknown parameters on the first pass, i.e. when
AP_Param:load_all() is called. This is because we may still not know
about dynamically loaded parameters. When we call the second (last)
time, we expect to already know all possible parameters, so print a
warning to both console and the debug terminal.
2018-06-28 10:18:19 -07:00
7f0d5ddf21
AP_Param: stop panic()'ing on unknown parameters
...
Our track record on keeping parameters up to date with master is not
great and panic()'ing when loading them apparently is not helping
because every and each vehicle has a different file.
On aerofc load_defaults_file() is used in the same way as
load_embedded_param_defaults() is in which the panic() behavior has been
previously removed.
This finishes the removal of the panic param and add warnings to the
debug console when reading the parameters (rather than when counting
them).
2018-06-28 10:18:19 -07:00
83b918f1c3
AP_Param: make send_parameter_value_all a GCS method rather than static
2018-05-01 09:39:01 +10:00
32795f0a8f
AP_Param: correct possible use of nullptr during param count
...
::first can return nullptr
2018-04-02 14:12:09 +09:00
c6c5603382
AP_Param: added back key dumping code
...
this is essential for working out conversion tables.
2018-01-24 18:23:59 +11:00
a1a5665213
AP_Param: Support marking a param group as ignoring the enable flag
2018-01-17 22:21:55 +00:00
51512ed7c0
AP_Param: don't panic on bad embedded parameters
...
this makes life much easier for vendors
2018-01-15 11:46:02 +11:00
d0d6040b3e
AP_Param: use wider range of sentinal values
...
this copes better with power off while writing parameters
2018-01-15 11:46:02 +11:00
4ac49483c8
AP_Param: added support for embedded parameters
...
use a block of flash to hold embedded parameters that can be changed
using apj_tool.py
2017-12-18 11:14:59 +11:00
d5896287b7
AP_Param: Add set_by_name and set_and_save_by_name helpers
2017-10-25 21:07:09 +11:00
e3599ab4f9
AP_Param: remove CLI
2017-08-14 10:23:50 +09:00
8de96ee4a1
AP_Param: Check for duplicate group id's before handling groups
2017-07-17 08:43:50 -07:00
60e4c0eb98
AP_Param: make count_parameters() thread safe
2017-05-01 14:36:10 +10:00
47803e73e4
AP_Param: allow for dynamic var_info tables
...
this allows the var_info entry in a table to be a constant pointer,
allowing the selection of a type for a parameter class at runtime.
2017-03-25 16:22:10 +11:00
c93942695f
AP_Param: load parameters from a comma-separated-list
...
This patch will break things for anyone who is using
a comma in their filenames for their ardupilot defaults
files.
2017-02-23 22:46:33 -08:00
fe189fefbc
AP_Param: Factor load_defaults_file (NFC)
2017-02-23 22:46:33 -08:00
79b0c856b2
AP_Param: added support for frame specific parameters
...
this allows for libraries that have parameters that are only activated
on particular frame types
2017-02-14 19:49:29 +11:00
59454b0c6f
AP_Param: Unify from print or println to printf.
2017-01-27 18:20:22 +11:00
4687785185
AP_Param: fixed a bug in default file handling
...
this fixes a bug in how default file values are handled that affects
any common sub-objects. When we had a default value for something like
SERVO12_FUNCTION then configured_in_defaults_file() would return true
for SERVO1_FUNCTION as it shares a common default value pointer
this changes the implementation to use the object pointer instead
2017-01-24 09:50:25 +11:00
a481e52861
AP_Param: make configured() const
2017-01-20 13:02:53 +09:00
5aa4bc4368
AP_Params: fix seg fault in debug function
...
otherwise at start, when loading paramter is could fail at AP_Param.cpp:611, Debug("scan past end of eeprom")"
2017-01-13 08:54:20 -08:00
d005cbffd8
AP_Param: added convert_parent_class()
2017-01-12 17:39:37 +11:00
05e9462a9c
AP_Param: added CONVERT_FLAG_REVERSE and CONVERT_FLAG_FORCE
2017-01-12 17:39:37 +11:00
d430cd62a6
AP_Param: fixed loading defaults file after storage
...
make sure defaults don't override storage values
2017-01-12 17:39:37 +11:00
0c32178d07
AP_Param: added reload_defaults_file()
...
this allows defaults to be set for parameters in pointer objects
2017-01-12 17:39:37 +11:00
0d6801fbe6
AP_Param: added find_old_parameter() method
...
allows for custom conversion of parameters
2016-12-31 10:55:59 +09:00
c808ee2f49
Global: To nullptr from NULL.
...
RC_Channel: To nullptr from NULL.
AC_Fence: To nullptr from NULL.
AC_Avoidance: To nullptr from NULL.
AC_PrecLand: To nullptr from NULL.
DataFlash: To nullptr from NULL.
SITL: To nullptr from NULL.
GCS_MAVLink: To nullptr from NULL.
DataFlash: To nullptr from NULL.
AP_Compass: To nullptr from NULL.
Global: To nullptr from NULL.
Global: To nullptr from NULL.
2016-11-02 16:04:47 -02:00
2bd13af43d
AP_Param: unhide groups when generating parameters in autotest
2016-10-26 09:53:14 +11:00
152edf7189
Global: remove mode line from headers
...
Using a global .dir-locals.el file is a better alternative than
reincluding the same emacs header in every file of the project.
2016-10-24 09:42:01 -02:00
68f0777dac
AP_Param: fixed bug with deeply nested parameter trees
...
enumeration could loop forever if the IDs overlapped due to 8 bit
masking
2016-10-23 15:27:42 +11:00
0d113b265c
Examples: fix examples for px4
...
The change to use AP_BoardConfig messed up the examples. Here are some
updated but there are plenty more to do.
2016-10-04 12:50:47 -03:00
a071fa3921
AP_Param: display defaults path on startup
2016-06-30 14:16:52 +10:00
1581a5e354
AP_Param: fixed forced save of constructor override parameters
...
this fixes the problem where setting ATC_RAT_YAW_FILT to 20 in copter
didn't stick across reboots
2016-05-24 16:55:45 +10:00
5bd034a5a8
Global: start using cmath instead of math.h
2016-04-05 21:06:19 -07:00
86416e8f05
AP_Param: added set_default_by_name()
2016-04-01 16:39:51 +11:00
0530af93aa
AP_Param: allow top level parameters to be pointers
...
this will allow for the attitude_control variable in quadplane to be a
pointer
2016-04-01 16:16:03 +11:00
018c7425a4
AP_Param: added AP_PARAM_NO_SHIFT
...
used for cases where we know the shift is not needed
2016-03-18 12:33:16 +11:00
71b6d3e33d
AP_Param: add in nested group offset in load for conversion
2016-03-18 10:04:56 +11:00
c15fa950c0
AP_Param: convert_old_parameter becomes public and accepts scaling
2016-03-18 10:04:55 +11:00
12067b27b3
AP_Param: cope with multi-level nesting and zero-idx
...
this copes properly with multi-level nesting of groups, and fixes an
issue with an idx of zero in nested groups
2016-03-18 10:04:55 +11:00
ff04871fc5
AP_Param: fixed a reporting problem with AP_Vector3f
...
if we load an element other than the X element of a Vector3f via
MAVLink then the value reported back to the GCS would be at the wrong
offset in memory. This led to some very confusing results for users
2016-03-16 17:03:30 +11:00
c2db6bfb9d
AP_Param: Fix warning
...
Cast to the original type to use get function.
Still a hack but better than casting a pointer to an object which
memory mapping we are not supposed to know
2016-02-15 15:48:35 -02:00
b54bb757df
AP_Param: fixed flymaple build
2016-01-08 10:33:45 +11:00
415d800957
AP_Param: use get_custom_defaults_file()
2016-01-07 09:09:54 +11:00
93f0707679
AP_Param: added count_parameters() API
...
this auto-clears when an ENABLE parameter changes
2016-01-06 14:44:34 +11:00
224b2e2dda
AP_Param: allow group entries as duplicates
...
otherwise this breaks heli attitude control object
2016-01-05 07:50:23 +11:00
ac64effc74
AP_Param: allow group entries in any order
...
this will make the ENABLE flag more useful
2016-01-04 11:14:43 +11:00
57f580fdfc
AP_Param: enable param debug by default
2016-01-04 11:14:43 +11:00
1b8cf84801
AP_Param: allow for up to 512 top level vehicle parameters
...
this will make life a bit easier for copter
2016-01-04 11:14:43 +11:00
Andrew Tridgell
Lucas De Marchi
Peter Barker
Michael du Breuil
Jacob Walser
murata
Pierre Kancir
Mathieu OTHACEHE
Andy Little
Ricardo de Almeida Gonzaga
Randy Mackay
Julien Beraud