Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
33,621 Commits 71 Branches 509 Tags 763 MiB
Commit Graph

124 Commits

Author SHA1 Message Date
Peter Barker 937d8dac97 AP_Motors: remove unneeded initialisations 2018-07-23 16:30:40 +09:00
bnsgeyer dec8c5de77 AP_Motors: convert heli code to use SRV_Channels 
this converts the heli code to use the SRV_Channels output
functions. It does not change behaviour, but removes the last vehicle
type that did its own servo output calculations.  This change also
fixed servo initialization conflicts.

Note that this also allows helis to be setup with more than one
channel for a particular output (eg. two separate channels for tail
servo if they are wanted). This isn't likely to be used much, but does
make heli consistent with other vehicle types
 2018-07-16 12:41:16 +10:00
Jacob Walser abcb845af5 AP_Motors: refactor output_test -> output_test_seq 2018-07-02 11:31:58 -04:00
Jacob Walser 9ce9f95692 AP_Motors: make output_test signatures consistent and ensure override 
specifier on derived classes
 2018-07-02 11:31:58 -04:00
bnsgeyer c8488e3333 AP_Motors: Tradheli - swashplate servo trim fix for heli single and dual frames 2018-04-24 10:30:26 +10:00
bnsgeyer 690e8fd3f4 AP_Motors: TradHeli - Changed RSC mode 3 to a spline fit throttle curve 2018-03-27 09:07:03 +11:00
ChristopherOlson 96793a3ae7 AP_Motors:TradHeli - DDVP Ramp/Runup 
Change to ramp and runup DDVP tail rotor to prevent torque pitching the frame and provide runup in sync with main
rotor like a mechanically driven tail.

Fix some comments and remove indents found in whitespace in AP_MotorsHeli.cpp and AP_MotorsHeli.h
 2018-03-14 09:18:07 +09:00
Andrew Tridgell 03e1f6967f AP_Motors: removed enable() API 
all output channels are already enabled by SRC_Channels::enable_aux_servos()
 2017-10-22 15:52:50 +11:00
Andrew Tridgell e1f8e7bc58 AP_Motors: cope with H vs X frame in HeliQuad 2017-10-03 10:16:41 +11:00
Andrew Tridgell f07aac396c AP_Motors: support inverted flight for helicopters 2017-10-03 10:16:41 +11:00
Andrew Tridgell 1ad5e1db4e AP_Motors: integrate AP_MotorsHeli_Dual 
fixed issues with combining with Heli_Single
 2017-03-25 16:22:10 +11:00
Andrew Tridgell 638f1364be AP_Motors: adapt to new RC_Channel API 2017-01-12 17:39:37 +11:00
Randy Mackay 7be0f437a9 AP_Motors: consolidate matrix multicopters 
AP_MOTORS_x_FRAME definitions moved to motor_frame_type enum
init function and now accepts frame-class and type to perform initial motor setup
set_frame_class_and_type allows real-time changing of motor setup
initialised_ok flag and accessor records whether setup was successful
 2016-12-31 10:55:23 +09:00
Randy Mackay 2da7ea746b MotorsHeli: minor formatting updates 2016-12-14 13:21:59 +09:00
Mathieu OTHACEHE 152edf7189 Global: remove mode line from headers 
Using a global .dir-locals.el file is a better alternative than
reincluding the same emacs header in every file of the project.
 2016-10-24 09:42:01 -02:00
Andrew Tridgell 11975223dd AP_Motors: added H_RSC_POWER_NEGC and H_RSC_SLEWRATE 
this gives more control over throttle for petrol
helis. H_RSC_POWER_NEGC allows for a asymmetric V-curve, which allows
for less power being put into the head when landing or when sitting on
the ground. That can lead to significantly less vibration and chance
of ground oscillation. A heli not being flown with aerobatics does not
need to use high throttle at negative collective pitch.

The H_RSC_SLEWRATE allows for a maximum throttle slew rate to be
set. Some petrol motors can cut if the throttle is moved too
quickly. We had this happen at a height of 6m when switching from
ALT_HOLD to STABILIZE mode. It also lowers the chance of the blades
skewing in their holders with the sudden change of power when the heli
is disarmed. In general it is a bad idea to do instantaneous large
movements of a IC engine throttle.
 2016-07-03 18:29:05 +10:00
Andrew Tridgell bc7488e2f2 AP_Motors: fixed typos 2016-07-01 15:35:29 +10:00
Leonard Hall 4f0db2bc36 AP_Motors: learned THST_HOVER replace THR_MID 
This holds the estimated thrust required for the vehicle to hover
expressed as a number from 0 to 1.  0 will be equivalent to outputting
SPIN_MIN (which is a number from 0~1 but in the full output range) and 1 is equivalent to SPIN_MAX (also 0~1 but in the full output range)
 2016-06-18 11:55:49 +09:00
Fredrik Hedberg 75d5c87788 AP_Motors: Fix setpoint bug with 0~1 conversion in AP_MotorsHeli 2016-05-25 09:27:40 +09:00
Ricardo de Almeida Gonzaga 2802775e7d AP_Motors: Fix typos 2016-05-13 19:20:06 -03:00
Randy Mackay 2e8acf1f74 AP_MotorsHeli: calculate_scalars made protected 
No functional change
 2016-04-01 11:59:30 +09:00
Randy Mackay 4f1e62d551 AP_MotorsHeli: remove reset_radio_passthrough 2016-04-01 11:59:30 +09:00
Randy Mackay 9790245bf1 AP_MotorsHeli: replace collective_mid_pwm with collective_mid_pct 2016-04-01 11:59:30 +09:00
Randy Mackay 4514e8d100 AP_MotorsHeli: remove slow_start 2016-04-01 11:59:30 +09:00
Randy Mackay e863f0b9c0 AP_MotorsHeli: use AP_Motors set_radio_passthrough in 0 to 1 range 2016-04-01 11:59:30 +09:00
Randy Mackay b3334c3ae5 AP_MotorsHeli: rotor speed function in 0 to 1 range 2016-04-01 11:59:30 +09:00
Randy Mackay 756236af35 AP_MotorsHeli: remove unused delta_phase_angle 2016-04-01 11:59:30 +09:00
Randy Mackay 16ac92be82 AP_MotorsHeli: remove unused definitions 2016-04-01 11:59:30 +09:00
Randy Mackay aeef6692cb AP_MotorsHeli: remove unused roll_scalar, pitch_scalar, collective_range 2016-04-01 11:59:30 +09:00
Randy Mackay bcbe6b279e AP_MotorsHeli: explicitely set ServoControlModes enum 
Non functional change but this enum is tied to a parameter value so the exact value is important
 2016-04-01 11:59:30 +09:00
Randy Mackay 8febcedf4b AP_MotorsHeli: remove unnecessary static declaration 2016-04-01 11:59:30 +09:00
Randy Mackay f022e504b0 AP_MotorsHeli: remove unused get_collective_mid and out methods 2016-04-01 11:59:30 +09:00
Randy Mackay 1197a439af AP_MotorsHeli: move_actuators to -1 to +1 range 2016-04-01 11:59:30 +09:00
Leonard Hall f02e8f8e01 AP_MotorsHeli: remove output_armed_not_stabilizing 2016-04-01 11:59:30 +09:00
Lucas De Marchi 7d9153feb8 AP_Motors: replace header guard with pragma once 2016-03-16 18:40:42 +11:00
Robert Lefebvre 3a13db9333 AP_MotorsHeli: Add more parameter checks. 2015-12-07 14:51:42 +09:00
Andrew Tridgell 47b9f6598a AP_Motors: allow change to heli rotor speed controls while armed 
this helps a lot with tuning for gas helis
 2015-11-27 15:12:03 +09:00
Robert Lefebvre bb7f8c1999 AP_MotorsHeli: Create Servo Test functionality 2015-11-12 19:37:34 +09:00
Robert Lefebvre eeb544d098 AP_MotorsHeli: Create SV_MAN=5=Oscillate servo setup mode. 2015-11-12 19:37:33 +09:00
Fredrik Hedberg 212eb85ff2 AP_MotorsHeli: Add min and max collective to manual servo modes 2015-11-12 19:37:30 +09:00
Robert Lefebvre 22729e6927 AP_MotorsHeli: Change servo manual #defines into enum 2015-11-12 19:37:29 +09:00
Fredrik Hedberg 5fd7fe3e53 AP_Motors: Add manual servo override to center swash-plate for set-up in AP_MotorsHeli. 2015-11-12 19:37:25 +09:00
Jolyon Saunders ca28a49fa6 AP_Motors: Circular swash-plate limits for AP_MotorsHeli 2015-11-12 19:37:24 +09:00
Randy Mackay ca942f39dd AP_Motors_Heli: remove unused allow_arming check 2015-10-27 09:14:40 +09:00
Andrew Tridgell f22a1d3e6d AP_Motors: display message in heli parameter_check() 2015-09-25 12:30:34 +10:00
Randy Mackay e3ff4ed9c4 MotorsHeli: integrate RotorControlState 2015-08-31 11:43:59 +09:00
Robert Lefebvre bde43412d8 AP_MotorsHeli: Fix RSC Mode 3 2015-08-31 11:43:55 +09:00
Robert Lefebvre 28318c4116 AP_MotorsHeli: Move Output functions into parent class 2015-08-31 11:43:50 +09:00
Robert Lefebvre 84102c3e3f AP_MotorsHeli: Rework how servo setup is done. 2015-08-31 11:43:49 +09:00
Robert Lefebvre 345663f705 AP_MotorsHeli: Simplify servo init/reset 2015-08-31 11:43:48 +09:00