Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
27,295 Commits 71 Branches 509 Tags 716 MiB
Commit Graph

183 Commits

Author SHA1 Message Date
Andrew Tridgell 7ea0f65590 Plane: removed incorrect comment 2017-04-24 16:56:23 +10:00
Andrew Tridgell 06b0742481 Plane: fixed jump in qhover on takeoff 
Z controller PID is from -1 to 1

thanks to Leonard for spotting this
 2017-04-24 16:55:41 +10:00
Andrew Tridgell aab20317a0 Plane: fixed position control in QLAND_FINAL 2017-04-24 16:55:41 +10:00
Andrew Tridgell b1f1ace736 Plane: support vectored yaw tiltrotors 
this adds support for tiltrotors which control yaw by vectoring the
forward motors. This avoids the need for the rear motor on a
tilt-tricopter to have a tilt servo
 2017-04-24 16:54:41 +10:00
Andrew Tridgell 2d9c3e3d93 Plane: added EKF yaw reset handling to quadplane 
this follows the implementation from copter. Thanks to Leonard for the
suggestion
 2017-04-24 16:52:16 +10:00
Andrew Tridgell 88e02c7b35 Plane: log the throttle mix for quadplane copter control 2017-04-19 09:08:43 +10:00
Andrew Tridgell d5ec7b0aad Plane: fixed a sign error in the angle assist code 
thanks to Leonard for finding this!
 2017-04-18 22:09:22 +10:00
Andrew Tridgell b15b11e32d Plane: always stabilize with tailsitters 2017-04-14 12:48:08 +10:00
Andrew Tridgell 46d910539c Plane: fixed a warning 2017-04-11 17:34:40 +10:00
Andrew Tridgell 642a6acfcb Plane: support thrust vectoring in tailsitters 
adds Q_TAILSIT_VHGAIN and Q_TAILSIT_VFGAIN, allowing for thust
vectoring in both fixed wing and hover
 2017-04-11 17:34:40 +10:00
Andrew Tridgell 664e41cec6 Plane: bring in demanded climb rate over 1 second 
when we engage the Z controller in quadplane we bring in the climb
rate slowly to prevent a sudden change in motor demand
 2017-04-09 16:45:19 +10:00
Andrew Tridgell 0cf571d338 Plane: moved Z altitude target reset 
reset alt target whenever we have not run Z controller for 2s
 2017-04-09 16:45:19 +10:00
Mark Whitehorn 7679b758b0 Plane: add parameter RUDD_DT_GAIN for dual motor tailsitter 
controls rudder to differential thrust mixing in FW mode
 2017-04-06 08:29:44 +10:00
Andrew Tridgell acaef22416 Plane: improve transition from QSTABILIZE to FBWA or QHOVER 2017-04-05 20:00:29 +10:00
Andrew Tridgell 36d8f730e1 Plane: setup better defaults for tailsitters 2017-04-04 10:15:08 +10:00
Andrew Tridgell 5d06e4238f Plane: make the quadplane motors var_info dynamic 
this will allow for more quadplane motors class types
 2017-03-25 16:22:10 +11:00
Andrew Tridgell af97a3974b Plane: initialise target height correctly on quadplane transition 
this fixes a bug where a plane in QSTABILIZE would drop suddenly if
switched to FBWA when the target altitude had not been initialised
 2017-03-22 21:34:40 +11:00
Andrew Tridgell bb158a437e Plane: handle bad Q_FRAME_CLASS 
default to quad with a warning. This prevents users getting stuck
without being able to set Q_ENABLE=1

thanks to Leonard for noticing
 2017-03-18 22:10:20 +11:00
Andrew Tridgell 3f7e7d456f Plane: in fixed wing mode slave quadplane attitude rate controller 
For quadplanes this uses the attitude controller from fixed wing
when using the multicopter controller to assist fixed wing
flight. This prevents a rate mismatch between the two controller
leading to oscillation
 2017-03-14 14:42:20 +11:00
Andrew Tridgell 2db8589f49 Plane: smarter Z controller initialisation for quadplanes 
this is more generic than the previous one used only for the full
position controller
 2017-03-14 14:42:20 +11:00
Andrew Tridgell 4ff5bf5af5 Plane: zero integrators and set throttle mix 
this zeros fixed wing integrators during TRANSITION_AIRSPEED_WAIT and
uses a zero throttle mix during TRANSITION_TIMER. This should allow
the fixed wing controller more time to adapt to forward flight
 2017-02-26 09:20:51 +11:00
Andrew Tridgell c061d5615b Plane: added manual input mask for tailsitter prop-hang 
This adds new parameters Q_TAILSIT_MASK and Q_TAILSIT_MASKCH. These
parameters allow a user to use the tailsitter capabilities of a 3D
plane to teach themselves to prop-hang.

It works by allowing the user to setup a switch on their transmitter
to enable manual pass-thru of a set of the input channels to outputs
when in tailsitter hover. The user can then use that switch to allow
learning of hover control in a 3D plane one channel (or two channels)
at a time.
 2017-02-26 09:20:13 +11:00
Andrew Tridgell 3bb25eb194 Plane: added Q_TAILSIT_INPUT 
this allows the user to control tailsitters either in body frame (like
a plane) or in earth frame (like a multicopter). This is useful for
people wanting to learn to fly prop-hang on 3D planes
 2017-02-26 09:20:13 +11:00
Andrew Tridgell ea5186340b Plane: added Q_TILT_RATE_UP and Q_TILT_RATE_DN as separate parameters 
allow control of tilt rate separately for UP and DOWN

always allow at least 90 degrees/second for switching to MANUAL
 2017-02-25 17:53:26 +11:00
Andrew Tridgell e8b11924f8 Plane: split out the tailsitter transition complete code 
use both roll and pitch to trigger completion of transition. This
copes with situations where the plane has managed to get itself rolled
over far enough that it can't recover into hover
 2017-02-18 17:26:43 +11:00
Andrew Tridgell d5a3f844f1 Plane: changes for AC_WPNav 2017-02-18 17:26:43 +11:00
Andrew Tridgell c787f4c56f Plane: initial support for tailsitter transitions 2017-02-18 17:26:43 +11:00
Andrew Tridgell 83f3cee99e Plane: initial hooks for tailsitter support 2017-02-18 17:26:43 +11:00
Andrew Tridgell 0fc04b0158 Plane: setup plane frame type parameter flags 2017-02-14 19:50:01 +11:00
Andrew Tridgell c294519925 Plane: lower default Q_M_SPOOL_TIME to 0.25 2017-02-14 09:23:17 +09:00
priseborough 013eb254a2 Plane: use standard unit descriptor for milliseconds 2017-01-27 16:57:42 +09:00
Andrew Tridgell 07cedd8a66 Plane: prevent stability shutdown in transition 
this prevents the vertical motors from shutting down while
transitioning if the desired throttle was too low at the start of the
transition
 2017-01-25 19:01:15 +11:00
Andrew Tridgell 0d4405106f Plane: removed forcing of trim for motors in quadplane 
this caused problems with tricopter tail servos
 2017-01-25 19:01:15 +11:00
Andrew Tridgell 5c820adad4 Plane: fixed tilt transition with binary tilt servo 
once the tilt is fully fwd then force transition as done at any
airspeed
 2017-01-25 19:01:15 +11:00
Andrew Tridgell 586f8a9ca8 Plane: fixes for tilt quadplane after rebase 2017-01-25 19:01:15 +11:00
Andrew Tridgell 54bca768b8 Plane: added Q_TILT_TYPE for retract servo tiltrotors 2017-01-25 19:01:15 +11:00
Andrew Tridgell 2f100b0804 Plane: removed separate tricopter quadplane build 
can all be done with one build now
 2017-01-12 17:39:37 +11:00
Andrew Tridgell b83f50be0f Plane: use new SRV_Channels API 2017-01-12 17:39:37 +11:00
Andrew Tridgell 1c4bf77cf6 Plane: added custom conversion of Q_FRAME_CLASS parameter 2016-12-31 10:56:01 +09:00
Randy Mackay 934ef55338 Plane: quadplane instantiates motor matrix outside of case 
Thanks to khancyr for noticing this
 2016-12-31 10:55:23 +09:00
Randy Mackay c6dec5c3f6 Plane: quad plane uses consolidated multicopter classes 2016-12-31 10:55:23 +09:00
Pierre Kancir da1f784e78 Plane : quadplane change to float to avoid the loss of a fractional part 2016-12-05 12:39:31 -08:00
Tom Pittenger f556f705e6 Plane: move various g params to aparms 2016-11-25 19:07:30 -08:00
expntly 0d1e50b50b Plane: fix typo, check wp_nav is initialized 2016-10-27 14:39:50 +11:00
Mathieu OTHACEHE 152edf7189 Global: remove mode line from headers 
Using a global .dir-locals.el file is a better alternative than
reincluding the same emacs header in every file of the project.
 2016-10-24 09:42:01 -02:00
Andrew Tridgell 0445b51143 Plane: fixed throttle slew rate in manual for quadplanes 2016-10-12 09:55:37 +11:00
murata b3eecb87ac Plane: To define the same wording. 2016-10-06 10:03:23 -07:00
Andrew Tridgell cb61840ad2 Plane: tell TECS to use synthetic airspeed during transition 2016-10-05 11:52:52 +11:00
Andrew Tridgell 4e017bf5b3 Plane: fixed loiter mode when Q_GUIDED_MODE=1 
This fixes the fixed wing behaviour of LOITER mode whne
Q_GUIDED_MODE=1.

Many thanks to the PertUAV team for finding and reporting this bug
 2016-10-01 08:37:17 +10:00
Andrew Tridgell 841828541d Plane: fixed auto ICE engine cut in QLAND final 2016-09-29 05:18:55 +10:00