Commit Graph

291 Commits

Author SHA1 Message Date
Andrew Tridgell 08fcfa04ae APM_Control: only save autotune gains when P finished
this prevents saving values which are temporarily high due to tuning
process

See this bug report
https://discuss.ardupilot.org/t/plane-4-1-0-stable/76507/45
2021-10-10 19:00:57 +11:00
Ben Wolsieffer 68ee2c21dd AP_Control: apply pitch rate limit to turn coordination
At high bank angles, for example when rolling to/from inverted, a large turn
coordination pitch rate offset is requested. Before this patch, this offset was
not subject to the configured pitch rate limit, which could result in pitch
controller integrator windup.
2021-09-29 17:03:32 +01:00
Randy Mackay 570c12215d AR_AttitudeControl: fix get_throttle_out_speed use of passed in limits 2021-09-10 07:50:00 +09:00
Peter Barker 066ad0f8da APM_Control: remove unused variables 2021-08-23 08:39:41 +09:00
Andrew Tridgell 47854ac4b7 APM_Control: lower the tuning trigger threshold
this allows for slower stick movements during tuning

This is based on analysing the log from kir850 on rcgroups
2021-07-31 10:01:14 +10:00
Iampete1 bb624074dd APM_Control: remove outdated tuning guide 2021-07-28 18:26:31 +10:00
Andrew Tridgell 45cf726a4b APM_Control: new autotune scheme
this separately tunes D and then P, which more closely follows the
technique used for a manual tune
2021-07-24 15:32:55 +10:00
Peter Barker d2102ce9b7 APM_Control: stop taking references to ahrs in APM_Control 2021-07-21 18:27:23 +10:00
Andrew Tridgell 1633afb6cd APM_Control: adjust fixed wing filter defaults
adjust defaults based on discussions with Paul, and initialise the
FLTT value based on the controller time constant
2021-07-05 20:07:47 +10:00
Andrew Tridgell cd43c0ecef APM_Control: use FF to increase but not reduce tau in autotune
if user wants a slow time constant we should not override
2021-05-25 12:14:38 +10:00
Hwurzburg 4f4389df2f APM_Control: make centideg metadata incr and range consistent 2021-05-25 10:10:18 +10:00
Iampete1 bc90ba5486 AR_AttitudeControl: get_steering_out_rate use abs speed for G limit 2021-05-19 16:02:20 +01:00
Randy Mackay b4fd9848df AR_AttitudeControl: add get_stop_speed accessor 2021-05-11 15:31:17 +09:00
Iampete1 980c41e273 APM_Control: G limit all turn rates 2021-05-03 19:22:16 -04:00
Andrew Tridgell f64c6f9ba1 APM_Control: fixed cygwin build
FF0 is a macro in cygwin
2021-04-15 06:57:16 +10:00
Andrew Tridgell 767a0b2a99 APM_Control: tweak the activation detection to catch more events 2021-04-15 06:57:16 +10:00
Andrew Tridgell bb1dc7192b APM_Control: lower default target filter frequencies
this will remove a lot of the level flight noise causing oscillation
at higher gains
2021-04-15 06:57:16 +10:00
Andrew Tridgell dd98f00947 APM_Control: prevent cross-axis tuning
this should fix tuning at higher AUTOTUNE_LEVEL values
2021-04-15 06:57:16 +10:00
Andrew Tridgell 320d3d20c2 APM_Control: log autotune at 25Hz 2021-04-15 06:57:16 +10:00
Andrew Tridgell 72b51a389c APM_Control: use ATRP log msg via structure 2021-04-15 06:57:16 +10:00
Andrew Tridgell 7b073a61f1 APM_Control: allow for gain reductions when idle 2021-04-15 06:57:16 +10:00
Andrew Tridgell 91856b1d8c APM_Control: prevent bad init of FF in autotune 2021-04-15 06:57:16 +10:00
Andrew Tridgell 3fdd507157 APM_Control: log I and prevent numercial errors in autotune 2021-04-15 06:57:16 +10:00
Andrew Tridgell 24d53eade4 APM_Control: adjust filter for autotune to 0.75 Hz
this should give a better FF estimate
2021-04-15 06:57:16 +10:00
Paul Riseborough 9e6561e6b5 APM_Control: Ensure adequate trim speed 2021-04-15 06:57:16 +10:00
Andrew Tridgell fa88967b6e APM_Control: adjust min value for tconst 2021-04-15 06:57:16 +10:00
Andrew Tridgell b079da33c5 APM_Control: use slew rate to move gains more smoothly 2021-04-15 06:57:16 +10:00
Andrew Tridgell 772b1262d4 APM_Control: added proportional reduction to D and P 2021-04-15 06:57:16 +10:00
Andrew Tridgell d561cd358f APM_Control: log RMAX and TAU 2021-04-15 06:57:16 +10:00
Andrew Tridgell d914ce6829 APM_Control: reset filters on autotune start 2021-04-15 06:57:16 +10:00
Andrew Tridgell 7e64875a02 APM_Control: tweak tuning settings 2021-04-15 06:57:16 +10:00
Andrew Tridgell ccd7b15d06 APM_Control: apply pitch limiting at high roll to rate
this fixes an issue with a large elevator trim error when rolled at
close to 90 degrees
2021-04-15 06:57:16 +10:00
Andrew Tridgell 4694820ac3 APM_Control: allow for smaller minimum tconst 2021-04-15 06:57:16 +10:00
Andrew Tridgell 97f88f67f6 APM_Control: allow for AUTOTUNE_LEVEL=0
this means keep the existing TCONST and RMAX parameters, if non-zero
2021-04-15 06:57:16 +10:00
Andrew Tridgell 316541017a APM_Control: fixed handling of clipped actuator in autotune 2021-04-15 06:57:16 +10:00
Andrew Tridgell 9997b191a8 APM_Control: log smoothed rates 2021-04-15 06:57:16 +10:00
Andrew Tridgell 20ef242280 APM_Control: fixed restore of tconst on autotune abort 2021-04-15 06:57:16 +10:00
Andrew Tridgell 53ee13a083 APM_Control: use instance logging and allow AUTOTUNE_LEVEL adjustments 2021-04-15 06:57:16 +10:00
Andrew Tridgell 70c194c358 APM_Control: fixed LoggerDocumentation test 2021-04-15 06:57:16 +10:00
Andrew Tridgell 0b76a8018f APM_Control: move rmax and tau more slowly 2021-04-15 06:57:16 +10:00
Andrew Tridgell 3cb32a18f0 APM_Control: fixed for cygwin build 2021-04-15 06:57:16 +10:00
Andrew Tridgell 364fa0680d APM_Control: use shorter tau for autotune higher levels 2021-04-15 06:57:16 +10:00
Andrew Tridgell f88622def8 APM_Control: implement new autotune system
use actuator/rate ratio with median filter for FF and Dmod/overshoot
for P,I,D
2021-04-15 06:57:16 +10:00
Andrew Tridgell 12fad55891 APM_Control: fixed pid_info for pitch controller 2021-04-15 06:57:16 +10:00
Andrew Tridgell ead011c7c2 APM_Control: move to only ACPID 2021-04-15 06:57:16 +10:00
Andrew Tridgell 6ca9033dde APM_Control: run AC_PID in parallel with old PID for roll/pitch 2021-04-15 06:57:16 +10:00
Randy Mackay f0ffaa5624 AR_AttitudeControl: reset speed filter and I term when stopped 2021-03-04 09:07:32 +09:00
Andrew Tridgell 9a244eef29 APM_Control: added SMAX param docs 2020-10-25 10:32:48 +11:00
Andrew Tridgell d2a4505184 APM_Control: fixed bug in slew filter 2020-10-25 10:32:48 +11:00
Peter Barker d20c6ceb3b APM_Control: replace '@User: User' with '@User: Standard' 2020-09-22 14:56:04 +10:00