Peter Barker
af510801f1
Tools: autotest: use RC_CHANNELS rather than RC_CHANNELS_RAW
2018-09-12 10:06:36 +10:00
Peter Barker
a7042e3847
Tools: autotest: tweak output messages, loosen camera trigger timeout
2018-09-08 12:56:15 +10:00
Peter Barker
6e44ea13d4
Tools: autotest: do not arm vehicle before flaps test
2018-09-07 23:18:43 +10:00
Pierre Kancir
d8c53bbd9c
Tools: remove dependency on mavproxy for cmd_long based functions
2018-09-07 11:20:03 +10:00
Pierre Kancir
87a7fd0fbb
Tools: remove dependency on mavproxy for arming/disarm
2018-09-07 11:20:03 +10:00
Pierre Kancir
e278a09668
Tools: don't use strict comparison for param fetch all to cope with TYPE one's
2018-09-06 15:30:06 +10:00
Peter Barker
5d317a8ef7
Tools: autotest: clear Rover waypoints before toggling them in
2018-09-06 15:29:28 +10:00
Peter Barker
56646651c6
Tools: autotest: add test for RCn_OPTION - camera trigger
2018-09-05 13:47:19 +10:00
Peter Barker
f47823f4e4
Tools: autotest: add test for RCn_OPTION - toggling relays
2018-09-05 13:47:19 +10:00
Peter Barker
197edca772
Tools: expand test to cover use of disable-gcs-rc-overrides switch
2018-09-05 11:54:32 +10:00
Peter Barker
a9621191d8
Tools: autotest: correct descent throttle in copter fence test
...
1500 is sufficient that we may not descend.
2018-09-05 10:42:33 +10:00
Peter Barker
f1a0ebfd10
Tools: autotest: reduce verbosity of wait-for-heading
2018-09-04 10:32:26 +10:00
Peter Barker
5c7e21d38f
Tools: autotest: add test for clearing waypoints
2018-09-04 10:32:26 +10:00
Patrick José Pereira
fc1f2e4109
Tools: Update BARO_RND in sub param
...
From MS5837-30BA Ultra Small Gel Filled Pressure Sensor datasheet
The measurement depth system has a water depth resolution of 2 mm.
A standard deviation of 1.951 cm was the best result in experimental conditions
Signed-off-by: Patrick José Pereira <patrickelectric@gmail.com>
2018-08-28 15:12:46 -04:00
Pierre Kancir
36d8ef1971
Tools: auto fetch parameter if in fetch_all list
2018-08-27 21:28:09 +10:00
Pierre Kancir
f6cc934678
Tools: pep8 corrections + correct variable shadowing
2018-08-27 17:08:47 +10:00
Pierre Kancir
d5c4c32529
Tools: add gripper test for copter
2018-08-27 14:39:49 +10:00
Pierre Kancir
7f601db05b
Tools: add gripper tests
2018-08-27 14:39:49 +10:00
cclauss
da7fe1055a
Tools: add missing import to arducopter.py
...
Fixes undefined names on lines 1406 and 1408
2018-08-27 11:40:47 +10:00
Pierre Kancir
aedd5a9db2
Tools: make takeoff check if it need arming and auto arm
2018-08-25 09:29:24 +09:00
Pierre Kancir
92d06c354e
Tools: rise nav_takeoff_delay_abstime delta to cope with rounding.
2018-08-25 09:28:36 +09:00
Peter Barker
a80d27eeff
Tools: autotest: fetch parameters after applying parameter file
2018-08-23 11:34:37 +10:00
Leonard Hall
519be92902
Tools: sitl gain update for hexa y6 and octaquad
2018-08-22 11:07:07 +09:00
Pierre Kancir
9c6e75f45b
Tools: allow to retry to get parameters before timeout
2018-08-21 21:26:39 +10:00
Pierre Kancir
cc8aca1619
Tools: various fixes for Copter tests
...
Tools: correct altitude check
Tools: correct tests syntax
Tools: add autotest syntax check on common
Tools: search for syntax mistake on autotest lambda
Tools: put copter in hover trottle to prevent crash
Tools: reboot after baterry failsafe test
Tools: copter takeoff wait_ready_to_arm before arming
Tools: arm copter after land on RTL
Tools: reset copter battery voltage after battery failsafe
2018-08-21 20:41:09 +10:00
Peter Barker
ac55fae1c1
Tools: autotest: add test for Copter delayed-takeoff-with-do-set-speed
2018-08-20 14:15:40 +09:00
Leonard Hall
5cc3bf311a
Tools: sitl hexa default param updates
2018-08-20 13:14:42 +09:00
Patrick José Pereira
e3d797e063
Tools: sim_vehicle.py: Print a more readable exception
...
Signed-off-by: Patrick José Pereira <patrickelectric@gmail.com>
2018-08-20 11:13:56 +10:00
Peter Barker
2a174a5dac
Tools: add test for Sprayer-on-Rover
2018-08-17 15:33:35 +09:00
Peter Barker
0f7c837d2d
Tools: autotest: increase timeout for RTL test
...
BalanceBot is slow!
2018-08-16 16:06:00 +10:00
Peter Barker
4c89fa4b75
Tools: autotest: add tests for changing modes via MAVProxy mode command
2018-08-16 16:05:19 +10:00
Peter Barker
680f78869d
Tools: autotest: tidy and fix nav-delay test
2018-08-16 13:33:56 +10:00
Pierre Kancir
303e40f578
Tools: arducopter.py: add tolerance to takeoff alt
2018-08-15 20:06:07 +10:00
Pierre Kancir
2f9f793ccf
Tools: add arm and disarm tests
2018-08-15 16:38:20 +10:00
Peter Barker
aa36d20aa1
Tools: autotest: add steps to autotest to build and run unit tests
...
This is Linux-specific ATM
2018-08-15 12:11:43 +10:00
Peter Barker
8e3b69bca0
Tools: autotest: add flaps test
2018-08-15 10:16:13 +10:00
Pierre Kancir
a8ea84a729
Tools: autotest: clean function arguments
2018-08-15 10:16:13 +10:00
Peter Barker
6e7e24ac91
Tools: autotest: raise exception, don't return it
...
Spotted by @khancyr
2018-08-15 10:16:13 +10:00
Pierre Kancir
579d471e98
Tools: use set_parameter instead of mavproxy directly
2018-08-15 10:16:13 +10:00
Peter Barker
eba8dee371
Tools: autotest: add test for delay-until-absolute-hour-minute-second
2018-08-08 08:41:22 +10:00
Peter Barker
e932f873cc
Tools: autotest: use component id 250 so we have something different to mavproxy
2018-08-08 08:41:22 +10:00
Peter Barker
b8c0199853
Tools: autotest: add test for copter's NAV_DELAY function
2018-08-07 22:37:07 +10:00
Randy Mackay
56a89c0a1c
Tools: balance bot default params for SERVOx_FUNCTION
2018-08-06 11:30:22 +09:00
Randy Mackay
ddc5b031e3
Tools: balance bot autotest params in alphabetical order
2018-08-06 11:30:22 +09:00
Peter Barker
7772279785
Tools: param_parse.py - fix vehicle-specific values
2018-08-06 12:27:56 +10:00
Peter Barker
81b1270db9
Tools: autotest: use tcp for mavproxy-to-autotest mavlink
2018-08-05 16:07:15 +10:00
Peter Barker
af37e10126
Tools: autotest: factor out starting of our our mavlink connection
2018-08-04 10:07:22 +10:00
Peter Barker
dab93750a0
Tools: add test for rc overrides
2018-08-03 13:07:50 +10:00
Pierre Kancir
a262099d35
Tools: arducopter.py: set submode change as test
2018-08-03 08:57:50 +10:00
Pierre Kancir
a930822d9d
Tools: unify exception on os.link
2018-08-03 08:40:33 +10:00