Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
4,881 Commits 71 Branches 509 Tags 789 MiB
Commit Graph

4881 Commits

Author SHA1 Message Date
Andrew Tridgell 73c682faf6 Rover: fixed build with new RC_Channel code 2012-08-08 12:11:05 +10:00
Andrew Tridgell b0e403e6fb AP_Baro: the DerivativeFilter now handles duplicate data 
this saves a few bytes of memory
 2012-08-08 12:07:36 +10:00
Andrew Tridgell fb90d16092 Filter: make the DerivativeFilter test GNUPlot friendly 
makes testing easier
 2012-08-08 12:07:36 +10:00
Andrew Tridgell 2de06df08d Filter: automatically cope with duplicate timestamps 
this makes it easier for callers to avoid excessive slope calculations

Thanks to Jon Challinger for the idea
 2012-08-08 12:07:35 +10:00
Jonathan Challinger e97305ea6e APM: fixed rounding of altitude 
the cast was rounding to the nearest meter
 2012-08-08 12:07:35 +10:00
Andrew Tridgell c9a56e2223 Filter: fixed a off-by-one DerivativeFilter bug 
many thanks to Jon Challinger for noticing this!
 2012-08-08 12:07:35 +10:00
rmackay9 40839fdea2 ArduCopter: Dan Gray's fix for Condition_Yaw 
command_yaw_dir is an unsigned byte but was being set to a -ve number leading to very incorrect yaw target heading for counter clockwise turns.
command_yaw_end (i.e. turn's end target) was not being set if turn was of type "relative"
 2012-08-07 06:43:10 -07:00
Michael Oborne abd937a590 Merge branch 'master' of https://code.google.com/p/ardupilot-mega 2012-08-07 19:27:16 +08:00
Michael Oborne 4b27564833 Mission Planner 1.2.4 
remove geofence tab
add guided alt remeber
change wp upload retry to 200 ms
 2012-08-07 19:26:10 +08:00
Amilcar Lucas ff32fed176 ArduCopter: Use generic channel names for AP_Mount servos. 
This simplifies mission planner, the same code can be used for plane and copter now.
 2012-08-06 23:33:51 +02:00
Amilcar Lucas 16dd919819 Fix heli compilation 2012-08-06 23:30:02 +02:00
Michael Oborne b312938b5a Mission Planner 1.2.3 
hud font move
add progress bar lock
add quickview mono fix
fix centi-degree/degree units
fix mnt config camera tab
fix some meters/feet scaling issues
 2012-08-06 22:22:57 +08:00
Amilcar Lucas fbc25e4baa AP_Mount: move mount to a "retracted position" into the fuselage with a fourth servo 2012-08-06 01:27:29 +02:00
Amilcar Lucas 03b902d4b7 Add me :) 2012-08-06 00:40:12 +02:00
Amilcar Lucas a961988bba ArduCopter: Make the code fit in a 1280 chip again 
Even allows to control a camera/antenna mount, if the user explicitly wants to.
 2012-08-06 00:23:48 +02:00
Amilcar Lucas fc3a60a176 Default CLI_SLIDER_ENABLED to DISABLED 
Chris asked for this on the mailing list
 2012-08-06 00:22:33 +02:00
Amilcar Lucas 2a3be452e0 Spellcheck in comments 2012-08-06 00:21:14 +02:00
Amilcar Lucas 36bcd827b4 AP_Mount: Allow using any RC channel to control any of the mount axes. 
This has the added benefit of saving 60 bytes and simplifying Mission Planner gui.
Moved some code from RC_Channel_aux to AP_Mount class
The servos get written by the update_mount_position() function, this simplifies main()
PS: The beauty of using libraries: I did not have to touch a single line of ArduPlane's code!
 2012-08-05 23:48:57 +02:00
Amilcar Lucas fe4713b46e RC_Channel: Allow each channel to know who they are, this simplifies the enabling and output function calls. 2012-08-05 23:08:31 +02:00
Amilcar Lucas f28be02286 ArduCopter: Save more space in APM1280 2012-08-05 23:05:52 +02:00
Amilcar Lucas f3f89004e9 More work on ch9, 10 and 11 2012-08-04 19:44:41 +02:00
Amilcar Lucas 4be8073328 Implement set ROI 2012-08-04 18:44:29 +02:00
Amilcar Lucas 9b31938519 The mount type must be updated periodically 2012-08-04 18:44:08 +02:00
Amilcar Lucas 431ed1c9b9 More flexible RC support 2012-08-04 18:39:20 +02:00
Amilcar Lucas 7b2896c72b Merge from ArduPlane 2012-08-04 18:38:50 +02:00
Amilcar Lucas 813e3ad229 Enable camera triggering by default 2012-08-04 16:32:47 +02:00
Amilcar Lucas 8f836b2fd6 ATmega1280 does not have enough memory for mount support so disable AUTO GPS support, to allow mount support to fit. 
This should almost have no side effects, because the most users use MTK anyways.
If the user defined a GPS protocol, than we will NOT overwrite it
 2012-08-04 16:32:20 +02:00
Michael Oborne 1692cedf42 Mission Planner 1.2.2 
add DegreeTracker
fix popout tab on config page
add remember last config tab
fix bytes send count
fix deactivate bug
fix ap_limits bug
fix ap_mount bug
 2012-08-02 18:04:54 +08:00
Michael Oborne 2e8c6151c3 firmware build 2012-08-01 15:24:39 +08:00
Andrew Tridgell 526344ab7c APM: added control switch debouncer 
this adds a switch debouncer, similar to the one used in
ArduCopter. I'm adding this after a flight on the weekend where noise
on the control mode channel caused a mode change away from auto.

To prevent this change adding excessive mode switch latency, it also
moves the reading of the control switch to the 10Hz loop, away from
the 3.3Hz loop. That gives us 0.2s delay in mode switch changes and
allows for spikes in the control mode for 0.1 seconds without changing
mode.
 2012-08-01 13:59:37 +10:00
rmackay9 64f027bf42 ArduCopter: bug fix to reset yaw target when zero and when in stabilize or acro mode. 2012-08-01 12:15:02 +09:00
rmackay9 95522fb8a3 ArduPlane: bug fix to global var_info parameter list for ahrs object. 2012-08-01 10:52:34 +09:00
rmackay9 b85986cb44 ArduCopter: bug fix to global var_info parameter list for ahrs object. 2012-08-01 10:52:27 +09:00
Andreas M. Antonopoulos 1ea2cb7b75 AP_Limits: experimental "bounce" mode. 2012-07-31 18:39:58 -07:00
Robert Lefebvre 54b320a9a0 Fixing Trad Heli Ext ESC Controller 
-Added ramp-down rate instead of instantly setting ramp to zero when throttle is dropped to bottom. This is to allow "warm-restart" if shutdown was unintentional.
-Actual ESC still goes to zero while throttle is dropped to the bottom, only the ramp counter winds down slowly behind the scenes.
 2012-07-31 17:47:25 -04:00
Andreas M. Antonopoulos 005b3d7f62 AC2.7.1: Updated version and tag 2012-07-31 13:11:17 -07:00
Andrew Tridgell 24ba59f528 APM: fixed overflow in geofence code for altitudes above 327 meters 2012-07-31 15:46:47 +10:00
Jason Short 4829e937ea ACM: Toy mode fix - Pitch flipped the sign on roll/Yaw coupling. 2012-07-30 15:43:05 -07:00
rmackay9 072c247911 ArduCopter: reduce stabilize roll, pitch and rate yaw IMAX values 2012-07-30 11:01:45 +09:00
Michael Oborne 529e1bcc71 Mission Planner 1.2.1 
add enable/disable to mavlinkcheckbox
modify my button to curved
add delay to progress reporter dialog. to ensure correct parent
Fix Mount screen for AP
Fix Hardware screen Text
display roi difrently
modify HIL/Quad Hil
update dataflashlog format (thanks randy)
update mavcmd format for roi
 2012-07-30 07:23:42 +08:00
Andrew Tridgell cc9712860b APM: fixed case of 'LAND_PITCH_CD' 
mavlink parameters are uppercase by convention
 2012-07-29 17:07:38 +10:00
Michael Oborne 2d6d74f625 AC remove attitude hil unused extra (gps jump issue.) 2012-07-29 08:18:41 +08:00
rmackay9 38ff381620 ArduCopter: reset target yaw when throttle is zero (except if failsafe has been triggered) 2012-07-28 23:05:05 +09:00
rmackay9 717d0d25d4 ArduPlane: allow MPU6000's DMP to be used for attitude estimation. 
Enable by adding this line to APM_Config.h:
#define DMP_ENABLED ENABLED
 2012-07-28 19:50:40 +09:00
rmackay9 23a1e33e20 AP_InertialSensor_MPU6000: another attempt at fixing the SITL build 2012-07-28 17:19:19 +09:00
rmackay9 06a4aaa763 AP_InertialSensor_MPU6000: changed DMP memory definition (dmpMem) to const uint8_t to remove SITL compile errors (hopefully) 
Removed unused 'dump' variable from dmp_load_mem to reduce compiler warnings
 2012-07-28 16:33:04 +09:00
rmackay9 a10ac65c11 ArduCopter: added DMP_ENABLED to APM_Config.h to make it easier for people to enable it. 2012-07-28 16:31:38 +09:00
rmackay9 9a558be53e AP_AHRS_MPU6000: cleaning up compiler warning due to unused yaw_deltat variable 2012-07-28 16:23:25 +09:00
rmackay9 07a8d0cc99 ArduCopter: fixed HIL build by removing ability to change _kp and _kp_yaw gains (used for accel and gyro sensor mixing) 2012-07-28 16:22:35 +09:00
rmackay9 ea4e56309d AP_InertialSensor_Oilpan: changed initialisation order of parameters to remove compiler warning 2012-07-28 15:22:37 +09:00