Andrew Tridgell
409c147ce3
ACM: fixed heli build
2012-03-27 15:37:25 +11:00
Andrew Tridgell
5d7c571fb1
ACM: fixed the build on the 1280
2012-03-27 15:37:24 +11:00
rmackay9
441413f1c6
ArduCopter - added PID log type. Implemented for Yaw stabilize and rate controllers.
2012-03-25 16:09:08 +09:00
Andrew Tridgell
690ad58a64
AHRS: adapt ArduCopter for new AHRS framework
2012-03-19 17:29:02 +11:00
Jason Short
722a4d01e8
ACM: Attitude.pde - consolidated wind I term resets
2012-03-18 22:31:21 -07:00
Jason Short
bb56cea1ac
ACM: increased the available rate error constrain, it was too low
2012-03-10 12:39:16 -08:00
Jason Short
285f2dd791
ACM: removed the experiment for rate error.
2012-03-10 12:38:29 -08:00
Jason Short
43b3e1ccd1
ACM -
...
Implemented automatic ranging of Alt Hold gains. Works well in simulator and testing.
- alt hold estimation moved to 50 hz
- simple fixed observer calc for smooth and accurate climb rates useful for derivative calcs
- auto-reset of the I term by moving I value into throttle value. This recalcs the gain every 20seconds for battery drainage compensation in long flights.
- remove filtering for Nav_throttle
- added a way to lower the gain on nav_throttle for descents by / climb_rate error by 2 - seems to work OK and keeps copter from dropping like a rock when the Baro drifts quickly lower.
- removed old throttle hold set point code
- made throttle override for alt hold +- 200 vs 250
2012-03-06 22:22:14 -08:00
Jason Short
27f6afd178
added stab_d gain scheduling
2012-02-28 20:16:40 -08:00
rmackay9
8da8ce5b58
ArduCopter - made rate controller filters globals to fix compiler error on Arduino 022 (Arduino 1.0 was fine)
2012-02-28 22:56:26 +09:00
rmackay9
082cc70f1c
ArduCopter - Attitude.pde - updated get_rate_roll and get_rate_pitch to use new average filter.
...
modified all int to int16_t in Attitude.pde
2012-02-28 21:26:37 +09:00
Jason Short
a3f65b4a23
increased the rate error for more responsive alt hold
2012-02-25 13:31:21 -08:00
rmackay9
ab0e1d7632
TradHeli - increase max yaw input to 45 degrees
2012-02-24 20:18:40 +09:00
Jason Short
b1340bbf80
added a constraint to D term
2012-02-23 09:14:44 -08:00
Jason Short
70d7a1f5d0
Added slow_wp default in AP mode
2012-02-19 13:15:40 -08:00
Jason Short
03aa28224b
re-implemented WII Dampening filter for Marco.
2012-02-16 22:38:23 -08:00
Jason Short
6913400221
cast D term to float just in case
2012-02-16 22:09:21 -08:00
Jason Short
bb4c02fbff
Added acro_p to the params
2012-02-15 11:29:25 -08:00
Jason Short
11d1973abd
Added Acro_P
2012-02-15 09:10:14 -08:00
Andrew Tridgell
1af6f08b1c
adapted main ACM code for AP_Param
2012-02-13 16:22:52 +11:00
Jason Short
4f44ccc182
get_acro_yaw added
2012-02-10 22:32:55 -08:00
Jason Short
f3547a04a5
Acro fix - we had lost the scaling of Acro mode in 2.1. This restores that.
2012-02-09 22:22:00 -08:00
Randy Mackay
1a1f6cac5d
OptFlow - reenable OF_LOITER pid controller and reduce I term
2012-02-01 08:04:18 +09:00
Jason Short
c855c81d2a
limiting alt hold rate error to 1m/s
2012-01-29 17:08:34 -08:00
Jason Short
0213f4dd88
2.2B6 - Please verify Heli still functions properly.
...
Added AC_PID lib
Updated landing code
bug fixes
2012-01-28 22:00:05 -08:00
Randy Mackay
2f84b54bbb
OpticalFlow - replaced PI controller with PID controller.
...
Modified optical flow hold to use aggregated position instead of speed.
2012-01-25 21:55:14 +09:00
Jason Short
02d6adb21f
slightly less filtering for less latency
2012-01-21 22:04:54 -08:00
Jason Short
8f86caa3ff
limiting the pitch throttle compensation
2012-01-21 11:59:49 -08:00
Jason Short
525f7cd40f
cleanup
2012-01-20 22:52:30 -08:00
Jason Short
d991a22453
Refined the D term for stabilize
...
moved all the rest_I terms from code into 1 central place
2012-01-20 22:52:29 -08:00
Jason Short
11e1df497d
lowered Loiter I, commented out unused var
2012-01-14 11:20:40 -08:00
Jason Short
f25d741f62
temp removed alt D term until more testing
2012-01-14 11:20:40 -08:00
Jason Short
9a0539f39e
tuned down Alt hold D gain
2012-01-13 09:36:51 -08:00
Jason Short
09c4bbe46e
Added simple constrain for Alt d term
2012-01-13 08:49:55 -08:00
Jason Short
5418d330f6
Added a small D term on alt hold
2012-01-12 22:28:58 -08:00
Jason Short
581657ab7a
climb rate control
2012-01-10 23:42:26 -08:00
Jason Short
9d1b1dba77
Added comments
2012-01-10 23:42:26 -08:00
Randy Mackay
7b9701fdd5
ArduCopter - added ROLL_PITCH_STABLE_OF (i.e. Stabilised Roll/Pitch + adjustments based on optical flow)
...
Removed optical flow from regular loiter for now until it's tested.
2012-01-09 13:53:54 +09:00
Jason Short
3d7f3f6b77
removed unused var
2012-01-04 09:28:37 -08:00
Jason Short
e6887aa3ec
added Reset_Rate_I function
...
Removed I term from Throttle rate calc
Added some basic constrains to Acro
2012-01-04 09:28:37 -08:00
Jason Short
e17c8705ba
Loiter I reset
2011-12-31 09:45:25 -08:00
Jason Short
170a646ecf
removing I term clearance
2011-12-30 23:48:04 -08:00
Jason Short
8fc73844ee
Yaw Performance tweaks
2011-12-29 23:02:03 -08:00
Jason Short
89c705c8b9
removed loiter I from Reset Nav
2011-12-29 23:02:03 -08:00
Jason Short
83d52899b0
Added second order, filtered derivative in stabilize. Works much better than the non-filtered one I used to have.
2011-12-29 23:02:02 -08:00
Jason Short
dc2103d67f
the second accel test is just for fun.
...
Filtered output for Nav_throttle
2011-12-23 14:42:50 -08:00
Jason Short
ed818e4ccf
Cleanup
...
removed Iterm experiment - no noticeable effect in actual flight
2011-12-16 20:47:23 -08:00
Jason Short
2b5c039eae
turned off iterm for traverse
2011-12-15 20:51:41 -08:00
Jason Short
05e921f5d0
More power to descend
2011-12-15 20:51:40 -08:00
Jason Short
d5666f287c
added loiter control to reset nav
2011-12-14 22:08:41 -08:00
Randy Mackay
68d1fa6ec7
Arducopter - Attitude.pde - fixed small bug in pitch stabilise
2011-12-13 22:10:51 +09:00
Jason Short
424a11d269
Stability patch2 - Jose style.
2011-12-12 17:47:45 -08:00
Jason Short
4efbae4a1c
Hack to prevent fly aways
...
Cleanup to remove SIMPLE mode switch note
2011-12-11 12:01:06 -08:00
Jason Short
64cb2a54cf
eased up on the i term blocker
2011-12-10 23:25:52 -08:00
Randy Mackay
ced26d7ba2
TradHeli - Attitude.pde - made yaw contol use jason's stability patch
...
Quad - fixed small bug in pitch control (was using roll's stabilise controller)
2011-12-08 22:23:50 +09:00
Randy Mackay
ee8986c463
TradHeli - fixed roll/pitch so it's not scaled when throttle is scaled
2011-12-08 21:30:47 +09:00
Jason Short
e3700365d4
Stability patch updates,
...
Cleanup
2011-12-06 21:03:56 -08:00
Jason Short
55b2e5339a
simple patch to improve alt hold based on stability patch
2011-12-04 21:32:33 -08:00
Jason Short
be3dba817b
Stability patch from 55
2011-12-03 17:54:38 -08:00
Jason Short
a661311f60
remove PI_crosstrack
2011-11-19 13:58:53 -08:00
Jason Short
043c3197da
Added additional nav params to reset
2011-11-12 21:39:00 -08:00
Jason Short
ccc2746a22
removed debugging code
2011-11-08 14:41:46 -08:00
Jason Short
c7eb695b4a
SIM test
2011-11-08 14:11:02 -08:00
Andrew Tridgell
87d5581046
ArduCopter: use specific sized data types in a lot of places
...
this will make the Desktop build more consistent with the real AVR
build, and also with a future ARM build
2011-11-08 11:05:36 +11:00
Jason Short
34a53f6f7d
Removed some old debug prints from motors.pde
...
added ability to not increment I term for traversals.
2011-11-07 14:32:39 -08:00
Jason Short
6d0a32cc65
Alt hold fix
2011-11-07 12:00:37 -08:00
Jason Short
7bf8ef98f5
default top_bottom ratio 1.0
2011-11-06 22:45:07 -08:00
Jason Short
37883a93f6
Merge branch 'master' of https://code.google.com/p/ardupilot-mega
2011-11-04 21:42:10 -07:00
Jason Short
80c7e135d5
renamed some command variables to align with Arduplane
...
reworked the arming code and moved the DCM gains out.
updated climb_rate to include sonar data.
2011-11-04 21:41:51 -07:00
unknown
3df9a03e02
TradHeli - fix to allow tail servo to be reversed. Also increase max movement of tail servo to 45 degrees.
2011-11-05 12:31:30 +08:00
Jason Short
7b88499579
Z dampener
...
Integrated Aurelio R. Ramos' Z dampening code.
2011-11-01 21:18:47 -07:00
Jason Short
561a5a740b
removed accel.z references
2011-11-01 09:28:23 -07:00
Jason Short
09fa260883
Tweaks to alt hold
2011-11-01 09:25:23 -07:00
Jason Short
a88424b152
Added a slew rate to the alt change rate.
...
Added better reporting of throttle control
upped constraints for alt hold
Additional logging for CTUN lay hold
2011-10-28 21:29:10 -07:00
Jason Short
81083ddecf
Attitude
...
Made the Acro mode more NG like. Should be much more nimble!
Tweaked the Accel hold with sim tests. not flight tested or enabled by default.
added option to set scalar in angle boost
2011-10-27 12:31:46 -07:00
Michael Oborne
1a715706a6
fix make issue
2011-10-04 09:34:47 +08:00
Jason Short
7e81756ccd
Added second PI loop for alt hold.
...
Upped gains for default JDrones Frame
added gains for second PI loop for alt
removed some tests for 1280 space constraints
2011-10-02 11:36:23 -07:00
Jason Short
9a4bd31a8b
Minimized the accel_filtered vector to be faster and more accurate.
...
Made the Filter include the Accels and moved from 8 to 4 terms in the filter
2011-09-30 18:40:29 -07:00
Jason Short
df1a39f650
Added ADC gyro Filtering for quads - this fixes a noise issue introduced into the controller
...
added Position mode
removed
Added back in the accelerometer experiment
Added filter_result boolean to enable filter on the fly
2011-09-29 23:27:23 -07:00
Jason Short
d0405b0a0a
2.0.46 -Not flight tested!
...
restored 42 alt hold code
removed throttle timer, replaced with safer constant
increased alt control range
reformatted nav_rate calls
removed unused simple mode defines
set alt hold home to 10m
tuned down rateP to .13 from .14 for broader application.
2011-09-27 09:35:05 -07:00
Jason Short
059551de48
Fixed issue with Simple mode changes.
...
Reverted to simpler, safer timer code for throttle hold
2011-09-25 14:16:35 -07:00
Jason Short
bdf6471587
Better throttle boost value
2011-09-24 21:55:54 -07:00
Jason Short
0540331426
Fixed throttle_boost
2011-09-23 15:34:18 -07:00
Jason Short
0f5c74f03a
Trying to make Alt hold more aggressively change altitudes.
2011-09-23 13:58:39 -07:00
Jason Short
f65390920a
Added a default, but low throttle cruise value
...
Added a clear integrator for Rate I to prevent tip ups at launch.
2011-09-22 23:10:55 -07:00
Jason Short
5b57df5d1c
Refined Throttle Timer reset
...
Reduced Loiter I gain to decrease overshoot.
2011-09-22 17:38:39 -07:00
Jason Short
ffb6f06f57
Fixed Throttle integrator bug. Time was not being reset causing a big drop in throttle control.
2011-09-22 12:28:46 -07:00
Jason Short
e4f87d7442
removed debug statements
2011-09-21 22:34:27 -07:00
Jason Short
7512e686b9
Fixed Timer overflow for throttle PI loop.
...
Moved look at home to update_nav where it belongs
2011-09-21 22:31:12 -07:00
Jason Short
59a2d2a256
Converted Millis to Micros
...
added navigation check to return a failed navigation
2011-09-19 22:24:57 -07:00
Jason Short
3b4743ef03
changed PI Library to take Float for DeltaTime
...
Changed timing to be more accurate in main loop. Still need to switch to micros(). Left that for Tridge. This gets rid of six floating point calcs *250. Nice!
2011-09-19 14:02:42 -07:00
Jason Short
9a508a20f4
Integration of optical flow
...
bug fixes for new Simple mode
increased Baro filter by 2 fields
2011-09-15 23:33:00 -07:00
Jason Short
ae81a758de
Removed Simple Mode
...
Added Simple option to mode switch positions
removed unused OptFlow code
added reset lat and lon error
removed unused init_auto
Fixed log formatting
Added simple mode bitmask
removed pitchmax
added CLI setup for enabling Simple mode to any switch position
2011-09-14 13:58:18 -07:00
Jason Short
8ae158191f
Fixes Alt hold mistake
...
Moves tuning into runtime definable param
Added more IMax to throttle
Signed-off-by: Jason Short <jasonshort@gmail.com>
2011-09-10 15:16:51 -07:00
Andrew Tridgell
be8864f424
renamed top level directories
...
ArduCopterMega -> ArduCopter
added archives directory for old code
2011-09-09 11:27:41 +10:00