Commit Graph

170 Commits

Author SHA1 Message Date
Randy Mackay b9e32d1f44 Rover: reduce expected times in scheduler table 2018-04-03 08:40:31 +09:00
Michael du Breuil b761a57da3 Rover: Support new battery interface 2018-03-27 22:12:21 +01:00
Peter Barker ceb64fb7d9 Rover: use ins singleton 2018-03-16 00:37:35 -07:00
Randy Mackay 86c39c0314 Rover: run update_mission at 50hz 2018-03-14 12:40:04 +09:00
night-ghost bab54ea647 Rover: allow AP_Stats to be optional 2018-03-02 07:23:35 +11:00
Andrew Tridgell f190ca0867 Rover: use scheduler.get_last_loop_time_s() 2018-02-13 17:15:05 +11:00
Peter Barker 90d26a5100 Rover: eliminate perf_update scheduler table shim 2018-02-13 17:15:05 +11:00
Andrew Tridgell 80c45a7431 Rover: use filtered loop time 2018-02-13 17:15:05 +11:00
Peter Barker 7b6bc4adf1 Rover: pass log-performance-bit at init time rather than update time 2018-02-13 17:15:05 +11:00
Peter Barker 55c27dfc56 Rover: move logging of PM messages to AP_Scheduler 2018-02-13 17:15:05 +11:00
Peter Barker b2e2b91d7e Rover: move PERF: statustext sending into AP_Scheduler 2018-02-13 17:15:05 +11:00
Peter Barker d9bb546048 Rover: use AP_Scheduler's loop() function 2018-02-13 17:15:05 +11:00
Peter Barker 211e7416a9 Rover: use scheduler ticks in place of mainloop_count 2018-02-13 17:15:05 +11:00
Peter Barker 9511e72113 Rover: use PerfInfo for performance monitoring 2018-02-13 17:15:05 +11:00
Peter Barker df304c5e6b Rover: remove shims used in scheduler table 2018-02-12 15:39:26 +09:00
Andrew Tridgell 65308f9411 Rover: removed compass learn_offsets() 2018-02-08 17:36:33 +11:00
Michael du Breuil 2e9e91b3a3 Rover: Move battery logging to AP_BattMonitor 2018-02-06 00:11:32 +00:00
khancyr 5503a0069d Rover: add proximity library 2018-01-22 17:18:41 +09:00
khancyr c3fb985ec5 Rover: add fence support 2018-01-22 17:18:41 +09:00
Randy Mackay de196f818d Rover: log STER dataflash message regardless of mode
It is useful to at least have the pilot's steering in request even in manual modes
2017-12-09 12:18:49 +09:00
Randy Mackay 9710b16cac Rover: THR dataflash logging replaces CTUN 2017-12-09 12:18:49 +09:00
Peter Barker e38cefea8a Rover: add SmartRTL mode
called at 3hz from scheduler
2017-12-01 09:28:56 +09:00
Andrew Tridgell 01c4e51d08 Rover: don't disable compass on one bad reading
the compass can go back for a short time and recover

found by Michael
2017-11-28 09:02:24 +11:00
Peter Barker 2d0a23fcc8 Rover: call ins's periodic function 2017-10-27 16:33:45 +11:00
Randy Mackay 1600823b12 Rover: aux switch to learn cruise throttle and speed 2017-08-25 14:05:23 +09:00
Randy Mackay 524fe4cd82 Rover: aux switch saves waypoint in manual or steering modes
Also refactor aux switch methods
rename LEARN_CH to AUX_CH
2017-08-25 14:05:23 +09:00
Peter Barker fa2b500e93 Rover: remove CLI 2017-08-14 10:23:50 +09:00
khancyr 6b429bd372 Rover: remove redundant GPS check before camera update
this same check is included within AP_Camera
2017-08-05 17:05:19 +09:00
Randy Mackay 30852d4713 Rover: auto-reversed moved to mode 2017-08-05 11:20:58 +09:00
Randy Mackay 1e8e3609c6 Rover: remove duplicate setting of ground_speed
update_ahrs already does this using a slightly different method, having both likely leads to small twitches in ground speed at 10hz
2017-08-05 11:20:58 +09:00
Randy Mackay e88b1572b6 Rover: remove navigate 2017-08-05 11:20:58 +09:00
Randy Mackay b4af441eb9 Rover: remove unused update_navigation 2017-08-05 11:20:58 +09:00
Randy Mackay 2640ec9ed9 Rover: rename update_commands to update_mission 2017-08-05 11:20:58 +09:00
Peter Barker 81d52c282c Rover: camera is responsible for taking distance-based-images and logging 2017-07-28 14:27:53 +01:00
Randy Mackay ae487aa99b Rover: update wheel encoder at 20hz 2017-07-27 16:52:29 +09:00
Peter Barker 07f4603533 Rover: integrate mode class 2017-07-21 10:13:20 +09:00
khancyr 40b860e240 Rover: rename sonar to rangefinder 2017-07-14 17:40:05 +01:00
Randy Mackay ebbbe0584a Rover: integrate wheel encoder 2017-07-14 07:27:26 +09:00
Peter Barker 2692ee22d3 Rover: eliminate gcs_send_mission_item_reached wrapper 2017-07-11 23:45:16 +01:00
Peter Barker 130ad52a22 Rover: eliminate gcs_send_message wrapper 2017-07-11 23:45:16 +01:00
Peter Barker 9509f7f1bf Rover: use send_text method on the GCS singleton 2017-07-09 17:17:29 -04:00
khancyr 8ab3e83a3c Rover: use float qualifier and functions 2017-07-08 16:07:13 +09:00
khancyr 9b97ad0fc0 Rover: solve skid steer in value 2017-07-08 16:07:13 +09:00
Pierre Kancir 267a1532b9 Rover: integrate motors library
move throttle_slew_limit and THR_SLEWRATE parameter
move have_skid_steering to library
move mix_skid_steering to library's output_skid_steering method
move radio.cpp's output channel initialisation to motor's init method
use motors.get_throttle and get_steering instead of getting from Servo objects
use motors.set_throttle and set_steering instead of setting to Servo object
AP_Arming::arming_required is replaced with SAFE_DISARM parameter
2017-07-08 16:07:13 +09:00
Peter Barker dcad79bdef Rover: use DataFlash should_log to determine raw IMU logging 2017-06-29 15:26:27 +01:00
Pierre Kancir 97595f98ac Rover: add comments to scheduler 2017-06-24 13:17:05 +09:00
Pierre Kancir feb8c30af4 Rover: move rssi.init and set_control_channels 2017-06-24 13:16:54 +09:00
Randy Mackay eb2aa80fca Rover: compass set-initial-location uses ahrs location
Previously it could attempt to use a gps location even if gps was not being used
Also compass-accumulate moved to sensors.cpp
2017-06-14 09:12:20 +09:00
Randy Mackay 584974fd74 Rover: set home from ekf position 2017-06-14 09:12:20 +09:00
Randy Mackay 0da6e73d76 Rover: add support for visual odometry 2017-06-14 09:12:20 +09:00
Pierre Kancir 00204367fc APMRover2: Reduce the home position reset when disarm 2017-05-04 21:57:45 +10:00
Pierre Kancir f725e9f2b5 APMRover2: correct some style after addition of velocity controler 2017-05-04 19:53:21 +10:00
Pierre Kancir ed26c103f9 APMRover2: prevent unless calculus when stoping 2017-05-04 19:53:21 +10:00
Pierre Kancir 670e7b7914 ROVER: put all guided param in one structure 2017-05-04 19:53:21 +10:00
Pierre Kancir 045d171ab9 Rover: add Guided velocity controller 2017-05-04 19:53:21 +10:00
Pierre Kancir 27e52695fe APMRover2: add initial support for MAV_CMD_CONDITION_YAW 2017-04-28 12:01:47 +10:00
karthik.desai 47ff9ddeec Rover: Added Beacon implementation
Enabled beacon parameters
beacon updates at 50hz
Use dataflash library to log AP_Beacon msg
2017-04-26 11:59:11 +09:00
Pierre Kancir 2eb0ed6242 APMRover2: Remove, correct some cast 2017-04-26 08:43:09 +10:00
Pierre Kancir 20cc336885 APMRover2: const correctness 2017-04-26 08:43:09 +10:00
Pierre Kancir c41e695c98 APMRover2: correct some style 2017-04-26 08:43:09 +10:00
Pierre Kancir b634fe548d APMRover2: Use c++ cast 2017-04-26 08:43:09 +10:00
Grant Morphett 304c9b6e72 Rover: Fixed a bug in reverse
If a user was driving in reverse and when into an auto mission the
rover would try to do the whole mission in reverse.  This fixes that.
2017-03-15 17:24:35 +11:00
Pierre Kancir 99ba8bdc08 APMRover2: add advance failsafe 2017-01-31 17:12:37 +11:00
Randy Mackay cc64c5e44a Rover: notify initialised after parameters loaded 2017-01-23 15:07:21 -08:00
Andrew Tridgell c638be54a3 Rover: removed use of pwm_to_angle() 2017-01-12 17:39:37 +11:00
Andrew Tridgell 93d6b012c2 Rover: convert to new SRV_Channel API 2017-01-12 17:39:37 +11:00
Pierre Kancir aea1c81437 Rover: APMrover2.cpp correct whitespace, remove tabs 2016-12-30 09:20:24 +09:00
Pierre Kancir dec954bb0c Rover: added crash check 2016-12-07 12:46:02 +11:00
Peter Barker dab0d8e6e2 Rover: inform dataflash of vehicle arm state 2016-11-28 09:42:09 -08:00
Grant Morphett 515ceb3ccd Rover: Added logging of the guided commands 2016-11-28 12:00:03 +11:00
Peter Barker 36c0bacada Rover: support for AP_Stats (flight time, bootcount, runtime) 2016-10-29 14:53:25 +09:00
murata a71e889f51 Rover: To nullptr from NULL. 2016-10-28 16:22:44 -03:00
floaledm 629af84ca1 Rover: update sensor status error flags independently of sending a sys_status message 2016-10-28 15:11:44 +11:00
Grant Morphett 2d09db4ecb Rover: added a new form of GUIDED mode
Rover now accepts a new message MAV_CMD_NAV_SET_YAW_SPEED
which has an angle in centidegrees and a speed scale and the rover
will drive based on these inputs.
2016-10-25 08:04:01 +11:00
Mathieu OTHACEHE 152edf7189 Global: remove mode line from headers
Using a global .dir-locals.el file is a better alternative than
reincluding the same emacs header in every file of the project.
2016-10-24 09:42:01 -02:00
murata eec491a1f9 Rover: To add a judgment of 0 degrees longitude. 2016-10-04 12:54:55 -03:00
floaledm 4030851207 Rover: removed frsky_telemetry_send scheduled task 2016-08-25 10:16:17 +10:00
Andrew Tridgell fd0f31dc44 Rover: added AP_Button support 2016-07-22 15:01:21 +10:00
Grant Morphett 57c23c7fe3 Rover: Adding support for rovers driving in Reverse. 2016-07-17 08:15:34 +10:00
Andrew Tridgell cfaacf031b Rover: use ahrs.groundspeed() in more places 2016-05-31 21:23:01 +10:00
Andrew Tridgell b8fa1bc9f7 APMrover2: update signing timestamp on GPS lock 2016-05-21 15:25:13 +10:00
dgrat 41661f815f AP_Math: Replace the pythagorous* functions with a variadic template
The new function can deal with a variable number of function parameters.
Additionally, I renamed the functions to norm(), because this is the
standard name used in several other projects.
2016-05-10 11:41:26 -03:00
skyscraper 8c9e55edfa APMRover2: Fix up after refactoring RC_Channel class
Further to refactor of RC_Channel class which included
adding get_xx set_xx methods, change reads and writes to the public members
to calls to  get and set functionsss

old public member(int16_t)   get function -> int16_t     set function (int16_t)
(expression where c is an object of type RC_Channel)
c.radio_in                     c.get_radio_in()           c.set_radio_in(v)
c.control_in                   c.get_control_in()         c.set_control_in(v)
c.servo_out                    c.get_servo_out()          c.set_servo_out(v)
c.pwm_out                      c.get_pwm_out()            // use existing
c.radio_out                    c.get_radio_out()          c.set_radio_out(v)
c.radio_max                    c.get_radio_max()          c.set_radio_max(v)
c.radio_min                    c.get_radio_min()          c.set_radio_min(v)
c.radio_trim                   c.get_radio_trim()         c.set_radio_trim(v);

c.min_max_configured() // return true if min and max are configured

Because data members of RC_Channels are now private and so cannot be written directly
 some overloads are provided in the Plane classes to provide the old functionality

new overload Plane::stick_mix_channel(RC_Channel *channel)
which forwards to the previously existing
void stick_mix_channel(RC_Channel *channel, int16_t &servo_out);

new overload Plane::channel_output_mixer(Rc_Channel* , RC_Channel*)const
which forwards to
(uint8_t mixing_type, int16_t & chan1, int16_t & chan2)const;

Rename functions

 RC_Channel_aux::set_radio_trim(Aux_servo_function_t function)
    to RC_Channel_aux::set_trim_to_radio_in_for(Aux_servo_function_t function)

 RC_Channel_aux::set_servo_out(Aux_servo_function_t function, int16_t value)
    to RC_Channel_aux::set_servo_out_for(Aux_servo_function_t function, int16_t value)

 Rationale:

        RC_Channel is a complicated class, which combines
        several functionalities dealing with stick inputs
        in pwm and logical units, logical and actual actuator
        outputs, unit conversion etc, etc
        The intent of this PR is to clarify existing use of
        the class. At the basic level it should now be possible
        to grep all places where private variable is set by
        searching for the set_xx function.

        (The wider purpose is to provide a more generic and
        logically simpler method of output mixing. This is a small step)
2016-05-10 16:21:16 +10:00
Andrew Tridgell ac4da762d1 Rover: adjust for changed logging APIs 2016-05-07 18:27:18 +10:00
Luis Vale Gonçalves 75ffc0618a Revising ardupilot.com to .org
Revising ardupilot.com to .org
2016-04-23 22:49:38 -07:00
Grant Morphett 8e69b66cf0 Rover: added the VIBE logging to the Dataflash logs. 2016-04-05 15:41:53 +10:00
Tom Pittenger 92fea608f3 Rover: add item_reached_msg to GUIDED 2016-02-14 16:12:56 -08:00
Andrew Tridgell eed575886c APMrover2: update for changed AP_Camera API 2016-01-29 09:19:43 +11:00
Dario Lindo Andres f731a0dc53 APMrover2: Added precise camera trigger logging
included update_trigger function
added camera trigger precise time mark
detect camera feedback pin status
added support for TRIGGER MSG
corrected according to defines.h
2016-01-29 09:19:43 +11:00
Siddharth Bharat Purohit 53d3e7dc61 Rover: wire up accel calibrator for Rover 2015-12-29 10:46:35 -08:00
Andrew Tridgell 7daab1ee62 Rover: convert to Hz based task table 2015-12-27 14:57:24 +09:00
Andre Kjellstrup 80f19aefc7 APMrover2: Camera options for better camera control
All on one because they would not pass autotest if split up.
2015-12-18 18:16:11 +11:00
Caio Marcelo de Oliveira Filho ee073787c8 Rover: use millis/micros/panic functions
Instead of going through 'hal' then 'scheduler', use directly the AP_HAL
functions. Besides removing indirection that is not necessary for such
functions, this patch ends up reducing the code size in the call sites.

For example, building ArduCopter for PX4 with this change (compared to
before introduction of the functions) yields almost 3k bytes of code
size.

    # ArduCopter build before the functions (1b29a1af46)
       text	   data	    bss	    dec	    hex	filename
     895264	   2812	  62732	 960808	  ea928	/.../px4fmu-v2_APM.build/firmware.elf

    # ArduCopter build after this patch
       text	   data	    bss	    dec	    hex	filename
     892264	   2812	  62732	 957808	  e9d70	/.../px4fmu-v2_APM.build/firmware.elf

A later patch will remove the unused functions in the Schedulers.
2015-11-20 12:26:14 +09:00
Grant Morphett bbbbd07935 Rover: GPS fix to ensure we only look at new GPS messages 2015-11-11 13:39:39 +11:00
Grant Morphett 3636b53313 Rover: Implementation of the ARMING functionality 2015-11-11 13:39:38 +11:00
Grant Morphett 2d1745ab6a Rover: Implemented the HOME state update from Plane 2015-11-11 13:39:38 +11:00
Lucas De Marchi 20c6ffc5e3 Replace use of UARTDriver::printf_P() with UARTDriver::printf()
This also starts to show warnings on places that were already using
wrong printf format strings.
2015-10-30 14:35:25 +09:00
Lucas De Marchi 831d8acca5 Remove use of PROGMEM
Now variables don't have to be declared with PROGMEM anymore, so remove
them. This was automated with:

    git grep -l -z PROGMEM | xargs -0 sed -i 's/ PROGMEM / /g'
    git grep -l -z PROGMEM | xargs -0 sed -i 's/PROGMEM//g'

The 2 commands were done so we don't leave behind spurious spaces.

AVR-specific places were not changed.
2015-10-30 14:35:16 +09:00
Lucas De Marchi 2c38e31c93 Remove use of PSTR
The PSTR is already define as a NOP for all supported platforms. It's
only needed for AVR so here we remove all the uses throughout the
codebase.

This was automated with a simple python script so it also converts
places which spans to multiple lines, removing the matching parentheses.

AVR-specific places were not changed.
2015-10-30 14:35:04 +09:00
Caio Marcelo de Oliveira Filho 06b2c966c1 APMrover2: implement HAL::Callbacks
Also removes includes for each board since they are not necessary
anymore.
2015-10-21 09:16:09 +11:00