Commit Graph

33364 Commits

Author SHA1 Message Date
Andrew Tridgell 47827f432d Tools: added CUAVv5Nano bootloader 2019-04-30 10:47:41 +09:00
Andrew Tridgell b26ae4594f HAL_ChibiOS: change CUAVv5Nano default PWM count to 11 2019-04-30 10:47:38 +09:00
Andrew Tridgell fc86a7db11 HAL_ChibiOS: fixed CUAVv5Nano uarts 2019-04-30 10:47:36 +09:00
Andrew Tridgell a9c868a154 HAL_ChibiOS: support for CUAVv5Nano board
F765 with no IOMCU
2019-04-30 10:47:34 +09:00
Andrew Tridgell 06cfdedfb2 HAL_ChibiOS: fixed fallback to microSD for storage
this is used when FRAM fails on a board with microSD support. The
double init caused the validate() in the FATFS code to fail
2019-04-30 10:47:31 +09:00
Andrew Tridgell 481a6ea570 AP_Rangefinder: probe all I2C buses for rangefinders 2019-04-30 10:47:28 +09:00
Randy Mackay 2f40967820 Copter: version to 3.6.8 2019-04-26 13:01:41 +09:00
Randy Mackay 32ef34f55e Copter: 3.6.8-release notes 2019-04-26 13:00:48 +09:00
Andrew Tridgell 7d667650a5 Copter: update version to 3.6.8-rc1 2019-04-24 12:25:04 +10:00
Andrew Tridgell 33ce31b720 Copter: updated release notes for 3.6.8 2019-04-24 12:25:04 +10:00
Andrew Tridgell 87ae7ac422 AP_InertialSensor: don't set INS_ENABLE_MASK to found IMUs
this is needed for detection of failed cubes
2019-04-24 12:24:12 +10:00
Andrew Tridgell edffc3001b AP_AHRS: ensure AHRS never uses an unhealthy gyro 2019-04-24 11:47:56 +10:00
Jonathan Challinger c630a87e37 AP_BoardConfig: add targetted check for cube black internal sensors 2019-04-24 11:47:56 +10:00
Jonathan Challinger 10c930d62d AP_Baro: make crc4 a static member of AP_Baro_MS56xx 2019-04-24 11:47:56 +10:00
Jonathan Challinger b02d58444f AP_HAL_ChibiOS: add define HAL_CHIBIOS_ARCH_CUBEBLACK to cubeblack hwdef 2019-04-24 11:47:08 +10:00
Randy Mackay 38b8af17f2 Copter: version to 3.6.7 2019-03-06 10:56:00 +09:00
Randy Mackay 3d04962c9a Copter: 3.6.7 release notes 2019-03-06 10:55:09 +09:00
Randy Mackay 270a2099ef Copter: version to 3.6.7-rc1 2019-02-28 08:53:45 +09:00
Randy Mackay 969ad4b555 Copter: 3.6.7-rc1 release notes 2019-02-28 08:53:17 +09:00
Randy Mackay afea0353c8 Copter: stop at waypoint depending upon next command 2019-02-27 20:06:18 +09:00
Randy Mackay 92b68d516b Copter: remove unused auto_spline_start declaration 2019-02-27 20:06:16 +09:00
Andrew Tridgell a9b5a0fea0 AC_WPNav: prevent I term buildup during landing
this prevents I term buildup in the XY velocity controller during
landing. This to account for the EKF giving a non-zero horizontal
velocity when we have touched down. The I term buildup in the XY
velocity controller can lead to the attitude error going above the
level for disabling the relax function as the throttle mix is
changed. That results in large motor outputs which can tip over the
vehicle after touchdown.

Thanks to Leonard for the suggestion
2019-02-27 20:06:15 +09:00
Andrew Tridgell 6668a2e602 AP_RangeFinder: fixed lightware serial with LW20 lidar
it needs a longer serial write to force it to serial mode from i2c
2019-02-27 20:06:06 +09:00
Andrew Tridgell f04efe7985 HAL_ChibiOS: allocate threads from any heap
this fixes a failure on MatekF405-Wing where it fails to allocate the
SPI thread for the IMU
2019-02-27 11:59:45 +11:00
Randy Mackay 6b88b2ba97 Copter: version to 3.6.6 2019-02-15 12:56:43 +09:00
Randy Mackay ff6a1c0b4b Copter: 3.6.6 release notes 2019-02-15 12:56:30 +09:00
Randy Mackay 4e740de44a Copter: version to 3.6.6-rc2 2019-02-09 16:02:08 +11:00
Randy Mackay 0526df1192 Copter: 3.6.6-rc2 release notes 2019-02-09 16:02:08 +11:00
Andrew Tridgell 26a38e206f autotest: added defaults for compass3 offsets 2019-02-09 16:02:08 +11:00
Andrew Tridgell 5ce1c14674 AP_NavEKF3: fixed EKF compass switching
when we had 3 compasses the lack of the 'break' meant when we switched
compass in flight we would always switch back instantly to the one
that we had just rejected.
2019-02-09 16:02:08 +11:00
Andrew Tridgell 95522b5486 AP_NavEKF2: fixed EKF compass switching
when we had 3 compasses the lack of the 'break' meant when we switched
compass in flight we would always switch back instantly to the one
that we had just rejected.
2019-02-09 16:02:08 +11:00
Andrew Tridgell f614dcbb18 AP_Compass: change to 3 compasses in SITL 2019-02-09 16:02:08 +11:00
Randy Mackay bed8774e1a Copter: Guided_NoGPS does not require GPS 2019-02-09 16:02:08 +11:00
Andrew Tridgell 30d11f6a40 Filter: fixed crash on zero cutoff frequency
this fixes #10435
2019-02-09 16:02:08 +11:00
Andrew Tridgell 5a0e0179d8 HAL_ChibiOS: fixed mini-pix uart order 2019-02-09 16:02:08 +11:00
Andrew Tridgell 2f7121a073 HAL_ChibiOS: fixed CAN on Pixhawk4 and PH4-mini
the silent pins floating disabled CAN
2019-02-09 16:02:08 +11:00
Andrew Tridgell 2e0b0aa14c waf: fixed git hash in generated APJ file
# Conflicts:
#	Tools/ardupilotwaf/chibios.py
2019-02-09 16:02:08 +11:00
Andrew Tridgell b72378db9c HAL_ChibiOS: setup APJ board IDs in environment 2019-02-09 12:27:35 +09:00
Randy Mackay 0163460489 Copter: version to 3.6.6-rc1 2019-02-02 12:03:00 +09:00
Randy Mackay 748afad925 Copter: 3.6.6-rc1 release notes 2019-02-02 12:02:58 +09:00
Randy Mackay 835c0d8991 AC_PosControl: remove unnecessary init of last_update_xy_ms 2019-02-02 11:34:38 +09:00
hongle 44da0d03d7 AP_RSSI: add V5 Nano to the RSSI_ANA_PIN param description 2019-02-02 10:34:49 +09:00
Michael du Breuil d93eb0306d AP_RSSI: Remove APM doc references 2019-02-02 10:34:48 +09:00
Randy Mackay df4dcf3c8f AC_PosControl: constify dt calcs 2019-02-02 10:34:47 +09:00
Randy Mackay 0929d0333b AC_WPNav: use dt from pos controller 2019-02-02 10:34:46 +09:00
Randy Mackay 4f74075e53 AC_PosControl: increase accuracy of dt calcs 2019-02-02 10:34:45 +09:00
bnsgeyer 0be7a7cf2d Copter: Tradheli-fixes hover roll trim ramp time 2019-02-02 10:34:45 +09:00
Andrew Tridgell f044627895 waf: fixed ROMFS compression to use zero timestamp
this makes the apj file indepenent of build date, which fixes this
issue:

https://discuss.ardupilot.org/t/arducopter-waf-build-repeatability/37182
2019-02-02 10:02:46 +09:00
Peter Barker 2550c9922d AP_RSSI: make RSSI work on ChibiOS 2019-02-01 14:01:10 +09:00
Rob Ratcliff 6af9be44a7 RC_Channel: treat UINT16_MAX as a value of 0 in set_override
Addresses ignore R/C override issue documented here:
https://github.com/ArduPilot/ardupilot/issues/1667
2019-01-24 11:20:10 +09:00