Joshua Henderson
ee273da50d
AP_Vehicle: move Airspeed to AP_Vehicle
2022-01-19 18:21:32 +11:00
Peter Barker
db6bb8d616
AP_Vehicle: move INS notch filter logging into INS
2022-01-05 16:34:36 +11:00
Peter Barker
295276cd37
AP_Vehicle: pass GyroFFT loop rate in Hz rather than period in us
...
It just calculates this anyway
2021-12-31 11:15:20 +11:00
Andy Piper
9ba1cbc9d8
AP_Vehicle: log up to 12 harmonic notch frequencies
2021-12-22 18:13:38 +11:00
Andy Piper
77acf9bcc2
AP_Vehicle: correct update_dynamic_notch_at_specified_rate()
2021-11-17 13:35:34 +00:00
Andy Piper
ac263e5659
AP_Vehicle: make sure notch update rate is configurable
2021-11-17 13:35:34 +00:00
Peter Barker
c559e27c55
AP_Vehicle: allow specification of Scheduler table priorities
2021-11-17 19:00:04 +11:00
Peter Barker
ce352410e1
AP_Vehicle: move EFI to AP_Vehicle
2021-11-05 09:22:17 +11:00
Peter Barker
d86e2792fd
AP_Vehicle: rename GENERATOR_ENABLED to HAL_GENERATOR_ENABLED
2021-09-26 19:24:09 +10:00
Tom Pittenger
de753f386c
AP_Vehicle: fix periph-heavy compile errors when INS is disabled
2021-09-24 10:47:13 -05:00
Andrew Tridgell
fd86cb0591
AP_Vehicle: moved accel cal update handling from vehicles
2021-09-17 14:07:14 +10:00
Peter Barker
7a06c941df
AP_Vehicle: make bad-mode-number notification consistent across vehicles
2021-09-01 19:45:46 +09:00
nkruzan
0a236bc13d
AP_Vehicle: log internal error and report bitmask to GCS
...
AP_Vehicle.cpp: cast parameter bitmask as (unsigned) per Peter B.
rework per Peter B.
Co-authored-by: Peter Barker <pb-gh@barker.dropbear.id.au>
remove unnecessary send_internal_error_statustext function
remove Write_InternalError function
2021-08-31 15:54:02 +10:00
Andy Piper
b6ec06ac0f
AP_Vehicle: output rcout banner when initialization is done
...
move down ready message
2021-08-12 19:07:51 +09:00
Hwurzburg
b69308858a
AP_Vehicle: correct OSD horizon for VTOL modes and TRIM_PITCH_CD in FW modes
2021-08-03 10:09:28 +10:00
Siddharth Purohit
a5a29fe3ec
AP_Vehicle: solve for undefined vehicle object in herepro build
2021-07-02 08:50:16 +10:00
Andy Piper
9bc9873e38
AP_Vehicle: optionally run the harmonic notch update at the loop rate
2021-05-19 17:35:16 +10:00
Andy Piper
5d154b138a
AP_Vehicle: generalise ESC telemetry to allow harmonic notch handling with other ESCs
...
log ESC telemetry data in frontend
2021-05-12 17:01:11 +10:00
Andrew Tridgell
6f5626d04f
AP_Vehicle: fixed SD card slowdown with early mounts
2021-05-01 12:32:23 +10:00
Andrew Tridgell
ec11bf1146
AP_Vehicle: fixed segfault in replay
2021-04-15 13:39:18 +10:00
Andy Piper
9ac8e2b705
AP_Vehicle: addlow SRV_Channels to be initialized
2021-04-06 10:24:04 +10:00
Peter Barker
749d4c997b
AP_Vehicle: ensure reboot command ACK is written out in SITL
2021-04-06 10:21:59 +10:00
Andy Piper
fcd35ba0f8
AP_Vehicle: move AP_Vehicle to AP_Vehicle
2021-02-23 11:43:32 +11:00
Andy Piper
b79ff9475d
AP_Vehicle: add support for the SmartAudio protocol
...
Co-authored-by: luis.martinez.exts <luis.martinez@juntadeandalucia.es>
2021-02-17 18:23:33 +11:00
Patrick José Pereira
b8360a08c7
AP_Vehicle: Add missing const in member functions
...
Signed-off-by: Patrick José Pereira <patrickelectric@gmail.com>
2021-02-03 18:45:14 +11:00
Andrew Tridgell
66297bd061
AP_Vehicle: added ExternalAHRS param tree and object
...
using EAHRS param prefix
2021-01-05 21:13:12 +11:00
yaapu
edf2291fb0
AP_Vehicle: added getters for waypoint info, refactored osd publish_nav_info()
2020-12-10 12:39:44 +11:00
Andrew Tridgell
a1c05e74b5
AP_Vehicle: call init_safety after first loop has run
...
this fixes a bug where servos can be driven to an out of range value
if PWM output happens before first loop has completed
thanks to Kris for reporting
2020-12-08 11:14:24 +11:00
Gone4Dirt
d25f9d5d3a
AP_Vehicle: Move AP_Generator to all vehicles
2020-11-24 12:54:52 +11:00
Andrew Tridgell
ae56f554b9
AP_Vehicle: send watchdog reset msg at startup
...
this helps if the watchdog will happen within 10s of startup
2020-11-10 16:15:45 +11:00
Mark Whitehorn
5f8b4968ec
AP_Vehicle: add instructions for config_error loop
2020-11-05 15:04:10 +11:00
yaapu
0012b83d86
AP_vehicle: added support for frsky bidirectional telemetry
2020-10-27 10:17:53 +11:00
Peter Barker
3aabb45059
AP_Vehicle: move orderly rebooting code from GCS into AP_Vehicle
...
Several places we reboot the vehicle we should probably do several of
the things done in this code - flushing parameters, forcing safety on
etc.
2020-09-29 18:07:59 +10:00
Tatsuya Yamaguchi
fb27dbbd4f
AP_Vehicle: replace message indicating that initialisation has completed
2020-09-22 09:52:52 +10:00
Peter Barker
0d396f4235
AP_Vehicle: don't do any GCS stuff in delay callback if we're Replay
...
We haven't initialised the GCS at all, so it's not a great idea to
update_receive() and the like.
2020-09-15 10:02:36 +10:00
Peter Barker
29d042dbc7
AP_Vehicle: Replay now creates vehicle singleton reference
2020-09-15 10:02:36 +10:00
Andrew Tridgell
7ae64d20aa
AP_Vehicle: init MSP earlier
...
this allows for MSP sensors (baro, compass) to be ready during probe
2020-09-09 06:35:50 +10:00
yaapu
7f789fb443
AP_Vehicle: added support for the MSP protocol
2020-09-02 05:56:46 +10:00
Peter Barker
34be953085
AP_Vehicle: add is_crashed method to AP_Vehicle
2020-08-05 16:26:19 +09:00
Andy Piper
820d6654af
AP_Vehicle: add VideoTX
2020-07-07 18:48:06 +10:00
Andy Piper
cb524b7d3d
AP_Vehicle: add function to log dynamic notch frequencies
...
move harmonic notch update here
2020-06-21 19:09:35 +10:00
Andy Piper
d873ec4533
AP_Vehicle: separate gyrofft gyro sampling from fft initiation
...
move FFT gyro sampling into fast loop for all vehicles
rename FFT update method
2020-05-24 07:43:34 +10:00
Andrew Tridgell
77b8f88289
AP_Vehicle: report thread name in watchdog mavlink msg
2020-04-29 07:36:55 +10:00
Randy Mackay
d1aa3858f0
AP_Vehicle: add visual odometry
2020-04-09 19:41:08 +09:00
Peter Barker
ec460b4244
AP_Vehicle: send statustext at regular intervals after watchdog reset
2020-03-31 14:30:11 +11:00
Peter Barker
1db081b095
AP_Vehicle: move AP_PARM_KEY_DUMP function up to AP_Vehicle base class
...
Common to all vehicles now, including Tracker
2020-03-10 11:00:14 +11:00
Peter Barker
2ede027635
AP_Vehicle: move initialisation of serial and gcs to AP_Vehicle
2020-02-25 11:50:55 +11:00
Peter Barker
2b7af4d70b
AP_Vehicle: fold init_vehicle back into AP_Vehicle init method
2020-02-25 11:47:52 +11:00
Andy Piper
6613d4da3d
AP_Vehicle: add FFT configuration and initialization
...
add arming checks to validate FFT performance
allow gyros to be sampled at either the fastloop rate or gyro rate.
add gyro and parameter update loops for GyroFFT
add GYRO_FFT aux function
save FFT results on disarm
2020-02-22 11:15:37 +11:00
Peter Barker
de2cf89b60
AP_Vehicle: initialise scheduler early
...
So the loop rate gets clamped before we memoise it and the loop period
in AP_Scheduler
2020-02-06 14:41:06 +11:00