giacomo892
|
41c5f35699
|
AP_VideoTX: Add pull down VTX option
|
2021-07-04 08:19:10 +10:00 |
giacomo892
|
b6b329d668
|
AP_SmartAudio: Remove useless variable and comment
|
2021-07-04 08:19:10 +10:00 |
giacomo892
|
ad69ba2f6c
|
AP_VideoTX: Add band names to GCS
|
2021-07-04 08:19:10 +10:00 |
giacomo892
|
f7e66c44c9
|
AP_VideoTX: Add configuration_finished functions
|
2021-07-04 08:19:10 +10:00 |
giacomo892
|
06a1442ec6
|
AP_SmartAudio: Add configuration_finished and configuration_pending functions
|
2021-07-04 08:19:10 +10:00 |
giacomo892
|
e8085fac97
|
AP_OSD_Screen: Blink the OSD VTX Power element indicating configuration in progress
|
2021-07-04 08:19:10 +10:00 |
Tatsuya Yamaguchi
|
9114caf213
|
AP_Proximity: fix proximity status for upward facing rangefinder
|
2021-07-04 08:19:10 +10:00 |
Randy Mackay
|
dbc9b0c2f9
|
AC_Loiter: init brake_accel and fix brake timer type
|
2021-07-04 08:19:10 +10:00 |
Tatsuya Yamaguchi
|
7335e4640f
|
AR_WPNav: add WP_PIVOT_DELAY parameter
|
2021-07-04 08:19:10 +10:00 |
Peter Barker
|
8fbd9b5e40
|
AP_Compass: remove unused setup_earth_field
|
2021-07-04 08:19:10 +10:00 |
Peter Barker
|
43cce260a0
|
GCS_MAVLink: remove HIL support
|
2021-07-04 08:19:10 +10:00 |
Peter Barker
|
fd8eb3c6c0
|
AP_InertialSensor: remove HIL support
|
2021-07-04 08:19:10 +10:00 |
Peter Barker
|
3a8d3c38e7
|
AP_HAL: remove HIL support
|
2021-07-04 08:19:10 +10:00 |
Peter Barker
|
2ff4ec80ad
|
AP_GPS: remove HIL support
|
2021-07-04 08:19:10 +10:00 |
Peter Barker
|
76aa7c485c
|
AP_Compass: remove HIL support
|
2021-07-04 08:19:10 +10:00 |
Peter Barker
|
759c37271a
|
AP_Baro: remove HIL support
|
2021-07-04 08:19:10 +10:00 |
Peter Barker
|
77718b1611
|
AP_Airspeed: remove HIL support
|
2021-07-04 08:19:10 +10:00 |
Peter Barker
|
1122642f50
|
AP_AHRS: remove HIL support
|
2021-07-04 08:19:10 +10:00 |
Peter Barker
|
42c47d6d84
|
AP_BattMonitor: add cells 13 and 14 for SITL only
Allows for testing higher-cell-count scenarios
|
2021-07-04 08:19:10 +10:00 |
Peter Barker
|
023c84f84a
|
AP_BattMonitor: add assertion to avoid memory over-read
|
2021-07-04 08:19:10 +10:00 |
Peter Barker
|
170062804f
|
SITL: add accessor for battery voltage
|
2021-07-04 08:19:10 +10:00 |
Peter Barker
|
6c473a80c2
|
SITL: add maxell to i2c bus and make it 14-cells
|
2021-07-04 08:19:10 +10:00 |
Peter Barker
|
cbd6dd3887
|
AP_BattMonitor: switch to Log_Write for BCL2
Just for the flash savings on smaller boards
|
2021-07-04 08:19:10 +10:00 |
Dr.-Ing. Amilcar do Carmo Lucas
|
222ef40321
|
AP_BattMonitor: Increase the max. nr. of supported battery cells from 12 to 14
Uses a second message, because the original message does not support any more fields
|
2021-07-04 08:19:10 +10:00 |
Iampete1
|
06e64b5585
|
AP_Scripting: add SN-GCJA5 particle sensor example
|
2021-07-04 08:19:10 +10:00 |
Peter Barker
|
3101b08489
|
GCS_MAVLink: correct decimation of SENSOR_STATUS message
static infers shared between all backends
|
2021-07-04 08:19:10 +10:00 |
Rishabh
|
36259bc195
|
AC_PrecLand: Use rotate_xy instead of matrix multiplication
|
2021-07-04 08:19:10 +10:00 |
Rishabh
|
7528d6ee7e
|
AC_PrecLand: Account for vertical camera offset in alt calculations
|
2021-07-04 08:19:10 +10:00 |
Rishabh
|
f7cbdb5559
|
AC_PrecLand: Initialize EKF before using its output
|
2021-07-04 08:19:10 +10:00 |
murata
|
d32bce85d1
|
AP_Scheduler: Change the Task Performance Notification Level to Information
|
2021-07-04 08:19:10 +10:00 |
Josh Henderson
|
32359e209d
|
AP_Math: SCurve check direction.length_squared is_zero
|
2021-07-04 08:19:10 +10:00 |
Peter Barker
|
5c9467044b
|
AP_HAL_ChibiOS: fix infinite loop for large SPI transfers
len is 32 bits; i may integer-wrap back to zero at 65535+1
|
2021-07-04 08:19:10 +10:00 |
Hwurzburg
|
1f8170a47d
|
AP_Vehicle: add QRTL always as Q_RTL_MODE option
|
2021-07-04 08:19:10 +10:00 |
Andrew Tridgell
|
217a1acd7d
|
HAL_ChibiOS: fixed build of VRUBrain-v51
overflowing flash
|
2021-06-24 18:03:40 +10:00 |
Andrew Tridgell
|
fcbb8647b5
|
AP_Logging: update EKF while waiting for log open
this prevents the EKF getting unhappy when we arm
|
2021-06-24 18:03:24 +10:00 |
Andy Piper
|
eea2151774
|
AP_BattMonitor: zero consumption total before recalculating
add reset function to ESC backend.
|
2021-06-24 18:02:10 +10:00 |
Samuel Tabor
|
534b807e22
|
AP_HAL_ChibiOS: Restore soaring on F405-Wing board.
|
2021-06-24 18:01:53 +10:00 |
Peter Barker
|
357770deba
|
AP_Logger: rearrange PrepForArming stuff
|
2021-06-24 18:01:38 +10:00 |
Andrew Tridgell
|
a1f8d4c79c
|
AP_Logger: moved log file open to logger thread
this prevents a watchdog if the filesystem takes a long time to
respond to a file open
|
2021-06-24 18:01:32 +10:00 |
Andrew Tridgell
|
1106b39d46
|
AP_Filesystem: removed the 3s grace period for file ops when armed
log file open now needs to happen in the logging thread
|
2021-06-24 18:01:29 +10:00 |
Andy Piper
|
132b651968
|
AP_HAL_ChibiOS: make sure all MatekF405 bi-dir outputs get a DMA channel
only allow (b)dshot on M1-4 to get full DMA on USART3 and UART4
|
2021-06-24 18:01:17 +10:00 |
Peter Barker
|
ce4ca0ac08
|
AP_InternalError: specify size for error_t
|
2021-06-13 08:41:25 +10:00 |
Andrew Tridgell
|
f19b604a0c
|
AP_Math: added xy() method on Vector3
useful for getting xy length
|
2021-06-13 07:50:02 +10:00 |
Peter Barker
|
d9e3526bd2
|
AP_HAL_SITL: correct compilation for mission pread/pwrite ret check
|
2021-06-12 16:02:51 +10:00 |
Rishabh
|
9a1a748348
|
AC_Avoid: Change ALT_MIN param to be copter only
|
2021-06-12 13:31:52 +09:00 |
Rishabh
|
b9fbf1a661
|
AP_Math: Update segment_to_segment_dis test
|
2021-06-12 13:31:52 +09:00 |
Rishabh
|
730cf0ad9b
|
AC_Avoid: Add deadzone param to avoidance backaway
|
2021-06-12 13:31:52 +09:00 |
Rishabh
|
b301bd0ca4
|
AC_Avoid: Use plane intersection in prox stop mode
|
2021-06-12 13:31:52 +09:00 |
Rishabh
|
547f0efd57
|
AP_Math: Add segment to plane intersection function
|
2021-06-12 13:31:52 +09:00 |
Rishabh
|
cb911a01e2
|
AP_Prox: Add plane intersection code to closest_point_from_segment_to_obstacle
|
2021-06-12 13:31:52 +09:00 |