Commit Graph

569 Commits

Author SHA1 Message Date
Andrew Tridgell 53997a284b AP_HAL_SITL: fixes from --ubsan autotest 2022-09-06 10:49:50 +10:00
Jeffrey Laut 3133aff352 SITL: fix simulated RC failure while receiving RC overrides 2022-09-02 12:08:34 +10:00
Peter Barker 1c7e2f5094 AP_HAL_SITL: correct bind-value SIM_RC_FAIL handling
If SITL is not receiving any sitl rc input (so _sitl_rc_in.recv(...) is allways returns -1 then the bind-values code would never be crossed so the RC input values would remain at their initialisation values rather than honouring the SIM_RC_FAIL setting which says they should go to bind values (notably throttle-to-950)
2022-08-10 17:14:21 +10:00
Henry Wurzburg e682296b58 AP_HAL_SITL: add TeraRange Neo Rangefinder 2022-08-09 09:01:34 +10:00
bugobliterator 8e81ee0292 AP_HAL_SITL: add support for starting node in maintenance mode 2022-07-27 18:18:03 +10:00
Andrew Tridgell 9b0c8674d6 HAL_SITL: catch ubsan errors into a log file 2022-07-12 11:00:08 +10:00
Andrew Tridgell f55aadfedf HAL_SITL: fixed undefined behaviour in GPIO 2022-07-12 11:00:08 +10:00
Andy Piper 061ddf7a3f AP_HAL_SITL: save a sliding window of frequency bins 2022-06-01 15:49:32 +01:00
Iampete1 031115577a AP_HAL_SITL: enable 32 servo outs 2022-05-22 12:07:37 +10:00
Clyde McQueen 25fd69b947 AP_HAL_SITL: init ArduSub pwm_output to [1500, ...]
Signed-off-by: Clyde McQueen <clyde@mcqueen.net>
2022-05-19 07:53:52 +10:00
Andrew Tridgell 7dc5da1247 HAL_SITL: cleanup SITL airspeed handling
fixed handling of EAS2TAS, and fixed ratio per sensor.

Removed the wind delay code (which was never being used). We should
add a generic delay filter if we need this again
2022-05-17 19:34:32 +10:00
Andrew Tridgell a6cd7ffd20 HAL_SITL: fixed warning 2022-05-06 06:55:16 +10:00
Andy Piper 3199412bff AP_HAL_SITL: add vector addition function 2022-05-04 17:05:51 +10:00
Andy Piper 63229d7eca AP_HAL_SITL: correct disable channel maths
unilaterally write rcoutput to appease the sitl gods
2022-03-29 10:29:31 +11:00
Andrew Tridgell f8aa4623ef HAL_SITL: don't use terrain adjustment 2022-03-28 16:01:21 +11:00
bugobliterator bd2bf7fedc AP_HAL_SITL: add support for CANFD in SITL 2022-03-27 06:07:34 -07:00
Andrew Tridgell 535d7f0d85 AP_HAL_SITL: removed terrain home correction 2022-03-10 07:34:20 +11:00
Andrew Tridgell 5eb8b8d72e HAL_SITL: support mavcan message forwarding 2022-02-12 16:36:05 +11:00
Andrew Tridgell 9fd25907e2 HAL_SITL: fixed mapping of --serial ports in SITL
uart paths are still in uartABCD order
2022-01-21 10:07:55 +11:00
Peter Barker ee341bc4eb SITL: add compilation option AP_SIM_CRSF_ENABLED 2022-01-15 21:56:33 +11:00
Peter Barker 08b8d3ad34 AP_HAL_SITL: correct compilation when SIM options disabled
AP_HAL_SITL: use AP_ASIM_GIMBAL_ENABLED

AP_HAL_SITL: use AP_SIM_ADSB_ENABLED

AP_HAL_SITL: use AP_SIM_RPLIDARA2_ENABLED

AP_HAL_SITL: use AP_SIM_PS_LIGHTWARE_SF45B_ENABLED

AP_HAL_SITL: use AP_SIM_PS_TERRARANGERTOWER_ENABLED

AP_HAL_SITL: use AP_SIM_AIS_ENABLED

AP_HAL_SITL: use AP_SIM_JSON_MASTER_ENABLED
2022-01-15 17:37:24 +11:00
Pierre Kancir 6584fef711 AP_HAL_SITL: catch more signal for correct exit
SIGINT is for ctrl-c
SIGHUP and SIGQUIT are use within term. If the term close before SITL, it will trigger one of those and then exit cleanly anyway
2022-01-12 12:31:56 +11:00
Shiv Tyagi af950e266b AP_HAL_SITL: add dataflash to spi device table
We simulate jedec flash for logging. Hence, we need to add dataflash to device table. Also, we need to remove HAL_LOGGING_SITL_ENABLED since we no longer need it

Co-Authored-By: Divyateja Pasupuleti <divyateja2004@gmail.com>
2021-12-25 09:14:31 +11:00
Andy Piper fa91e74fde AP_HAL_SITL: remove redundant harmonics from DSP 2021-12-22 18:13:38 +11:00
Peter Barker fbe46f400f AP_HAL_SITL: stop passing home_str to _sitl_setup
This is poked into the model now
2021-12-13 09:30:33 +11:00
Peter Barker 2f77fef10e AP_HAL_SITL: permit float-equal while we do comparison vs INFINITY 2021-12-13 08:38:17 +11:00
Peter Barker acbe567202 AP_HAL_SITL: consolidate rangefinder range calculations 2021-12-11 20:10:10 +11:00
Peter Barker 6e8c7c6b03 AP_HAL_SITL: remove unused mag-data delay buffer state variables
This delay buffer code is now in AP_Compass_SITL
2021-12-07 16:41:11 +11:00
Peter Barker cce14d8461 AP_HAL_SITL: remove unused _home_str member 2021-12-07 09:36:22 +11:00
Peter Barker 8cc7f51de1 AP_HAL_SITL: tidy set/get of hw RTC 2021-12-06 12:58:43 +11:00
Peter Barker 11cbd68296 AP_HAL_SITL: remove incorrect use of ARRAY_SIZE
This was converted to a linked list....
2021-11-24 18:26:17 +11:00
Peter Barker cdccc67fb8 AP_HAL_SITL: make SITL::ADSB a SITL::SerialDevice 2021-11-23 11:09:29 +11:00
Andrew Tridgell 3b3abdeef0 AP_HAL_SITL: support up to 9 UARTs 2021-11-22 22:48:59 +11:00
Peter Barker eb6da9512f AP_HAL_SITL: quieten i2c-device-creation diagnostics 2021-11-12 10:17:28 +11:00
bugobliterator 09096cb355 AP_HAL_SITL: add get_storage_ptr method 2021-11-10 17:21:35 +11:00
Peter Barker 9ebd0cdeed AP_HAL_SITL: use SITL::SerialDevice in place of pipe for communication 2021-11-06 16:54:07 +11:00
Peter Barker 02dc42275c AP_HAL_SITL: remove unused/unimplemented methods/vars, tidy namespacing 2021-10-28 09:09:44 +11:00
Andrew Tridgell 8192661042 AP_HAL_SITL: rename uLanding simulation to USD1 2021-10-26 15:31:12 +11:00
Peter Barker cf9bbb570c AP_HAL_SITL: correct nullptr check on simulated mavlink rangefinder
Obvious copy/paste error
2021-10-22 21:46:01 +11:00
Peter Barker 1ab8a3e3aa AP_HAL_SITL: make simulated GPS work as a SerialDevice 2021-10-21 12:09:21 +11:00
Peter Barker 99e80549b1 SITL: move sitl_gps.cpp to SIM_GPS.cpp 2021-10-21 12:09:21 +11:00
Stephen Dade 1356beb14d AP_HAL_SITL: Add instance to ADSB simulation 2021-10-20 20:21:33 +11:00
Peter Barker 21030c4e83 AP_HAL_SITL: remove written-only AP::sitl().update_rate_hz 2021-10-20 19:07:17 +11:00
Peter Barker 8c9ade3f7f AP_HAL_SITL: move simulated megasquirt to SerialDevice framework 2021-10-17 10:00:08 +11:00
Asa Davis 85fbbe0704 SITL: add simulator for LORD Microstrain serial EAHRS 2021-10-17 08:55:03 +11:00
Peter Barker f5d5387358 AP_HAL_SITL: remove unused ext_fifo_fd member variable 2021-10-12 20:07:19 +11:00
Peter Barker 67226433e3 AP_HAL_SITL: add simulated RAMTRON device 2021-10-12 20:01:49 +11:00
Peter Barker 58a7f022fd AP_HAL_SITL: add simulated SPI devices 2021-10-12 20:01:49 +11:00
Peter Barker d98cda12c6 AP_HAL_SITL: remove HIL_MODE vestiges 2021-10-12 08:57:05 +11:00
Peter Barker 521918d74c SITL: remove set-but-not-used _framerate member variable 2021-10-08 14:23:18 +11:00