bugobliterator
db2cc55507
modules: add CrashDebug
2021-10-30 19:24:57 +11:00
Andrew Tridgell
9c617a18f4
Plane: suppress rate D terms in ground mode
...
this prevents a common oscillation issue on the ground
2021-10-30 18:45:53 +11:00
Andrew Tridgell
8a73bdcbe6
APM_Control: suppress roll/pitch D term in ground_mode
...
prevent oscillations which are quite common
2021-10-30 18:45:53 +11:00
Shiv Tyagi
dfd7dfc1af
Rover: set failsafe_radio flag when RC failsafe is triggered/cleared
...
This sets failsafe_radio flag when RC failsafe is triggered/cleared which is further used in AP_Arming::manual_transmitter_checks to fail pre-arm checks if failsafe is on
2021-10-30 15:47:53 +09:00
Shiv Tyagi
1b8fc31fcd
Rover : add pilot_throttle_checks() to check throttle failsafe
...
This adds pilot_throttle_checks to check for throttle failsafe and prevents arming if throttle failsafe is triggered
2021-10-30 15:47:53 +09:00
Andrew Tridgell
50f9d2601f
AP_Arming: log key @SYS files on arming
2021-10-30 16:44:00 +11:00
Andrew Tridgell
0be1017843
AP_Logger: support logging of files contents
...
this allows us to see key internal data in log files
2021-10-30 16:44:00 +11:00
Andrew Tridgell
b74dca02ca
Plane: avoid qpos approach when very close to destination
...
this prevents a fwd transition when doing something like LOITER_TIME
close to a VTOL_LAND wp. We use 1.5 times the stopping distance at
cruise airspeed for the threshold
2021-10-29 20:22:19 +11:00
Andrew Tridgell
19b5044223
Plane: fixed VTOL state error when using Q_ENABLE=2
...
this ensures the poscontrol state is reset if it has not been
initialised before a VTOL loiter operation
thanks to Pete Hall for finding this
2021-10-29 20:22:19 +11:00
Andrew Tridgell
a0b662f161
hwdef: fixed reported flash on boards with storage at end of flash
...
this was in hwdef-bl.dat but had been left out of hwdef.dat which led
to flash_free being wrong in apj file
2021-10-29 18:28:36 +11:00
Shiv Tyagi
1c33cfca5d
AP_MSP: factor code in init method
...
This factors code in AP_MSP:init() and removes two of the three identical implementations for initialising backends
2021-10-28 20:37:24 +11:00
Andrew Tridgell
3eae5b54d2
DroneCAN: update DSDL
...
added hygrometer for CUAV
2021-10-28 15:53:24 +11:00
Tom Pittenger
6107dcc8e7
AP_ADSB: bugfix vertical velocity sign was backwards
2021-10-28 09:51:33 +11:00
Peter Barker
02dc42275c
AP_HAL_SITL: remove unused/unimplemented methods/vars, tidy namespacing
2021-10-28 09:09:44 +11:00
divyateja04
7f0bf89003
AC_AttitudeControl: removed empty constructors
2021-10-28 09:07:56 +11:00
Andy Piper
7daa276769
waf: stricter lua bindings build processing
2021-10-28 07:19:16 +11:00
Supernovae
00e4d2ee37
ArduPilot: README, grammar fixups
...
minor fixes for better readablity
2021-10-27 22:05:50 +11:00
Supernovae
0e023f21a6
ArduCopter: Tuning, NFC grammar fixups
...
changes to improve overall readablity
2021-10-27 22:05:50 +11:00
Supernovae
e35cf757c2
AntennaTracker: NFC grammar fix-ups
...
made some rectification for better readablity
2021-10-27 22:05:50 +11:00
Supernovae
8915c8f3ae
AntennaTracker: NFC grammar fix-ups
...
made some minor rectification for better readablity
2021-10-27 22:05:50 +11:00
drtrigon
3a0ed5446a
AP_Scripting: select auto or manual gimbal/camera control mode
...
I have a camera that has picture and video trigger on the same channel. As ArduPilot is not able to handle that currently I wrote a script that allows to switch between auto and manual gimbal and camera control modes. Switching to manual camera control allows to enable picture as well as video trigger.
2021-10-27 18:40:42 +11:00
divyateja04
24eb35f0f6
AP_WheelEncoder: quadrature spelling changed
2021-10-27 16:03:06 +11:00
Andrew Tridgell
51ccc1822c
Plane: rename ReleaseNotes.txt to be more consistent with copter
2021-10-27 15:32:32 +11:00
Tom Pittenger
99912e9e0f
AP_ADSB: UCP cleanup
2021-10-26 16:53:00 -07:00
nicholas-inocencio
f4ff8859e4
AP_ADSB: I implement new mavlink packets ADSB_OUT_STATUS and ADSB_OUT_CONTROL
2021-10-26 16:53:00 -07:00
nicholas-inocencio
9ca681c76d
GCS_MAVLink: integrate new ADSB Ping200X/MissionPlanner new mavlink config and status commands
2021-10-26 16:53:00 -07:00
Hwurzburg
9349abfe48
AP_Motors: add build options for each frame class
2021-10-27 07:59:52 +09:00
Andrew Tridgell
8f591a853b
Tools: run submodule fix 3 times
2021-10-27 06:24:41 +11:00
divyateja04
d82ad94b7e
AP_WheelEncoder: remove empty constructors
2021-10-26 22:10:21 +11:00
Randy Mackay
58b2154e77
AP_Torqeedo: handle outgoing esc characters
2021-10-26 19:40:52 +09:00
Randy Mackay
096f459148
AP_Torqeedo: handle incoming escape characters
2021-10-26 19:40:52 +09:00
Andrew Tridgell
32e318efcb
CI: add empy and pexpect to cygwin build
2021-10-26 19:15:31 +11:00
Andrew Tridgell
b94d6b064f
HAL_ChibiOS: convert some hwdef.dat to unix line endings
2021-10-26 15:56:53 +11:00
Andrew Tridgell
80836ca1d9
HAL_ChibiOS: simplify AP_Periph hwdef.dat
2021-10-26 15:56:53 +11:00
Andrew Tridgell
68146d541c
HAL_ChibiOS: removed boilerplate lines from bootloaders
2021-10-26 15:56:53 +11:00
Andrew Tridgell
0378e1a879
HAL_ChibiOS: removed need for a lot of boilerplate hwdef lines
...
bootloader and AP_Periph lines can default to right values
2021-10-26 15:56:53 +11:00
Andrew Tridgell
7056a09ef4
SITL: rename uLanding files to USD1
2021-10-26 15:31:12 +11:00
Andrew Tridgell
e94fdac91f
Tools: rename uLanding simulation to USD1
2021-10-26 15:31:12 +11:00
Andrew Tridgell
55e8725231
SITL: rename uLanding simulation to USD1
2021-10-26 15:31:12 +11:00
Andrew Tridgell
8e689f2e66
AP_SerialManager: rename uLanding simulation to USD1
2021-10-26 15:31:12 +11:00
Andrew Tridgell
8192661042
AP_HAL_SITL: rename uLanding simulation to USD1
2021-10-26 15:31:12 +11:00
Andrew Tridgell
4f2bec72b6
AP_RangeFinder: rename uLanding to USD1_Serial
...
this was rebranded by the vendor Ainstein a long time ago
2021-10-26 15:31:12 +11:00
Andrew Tridgell
c1b9585926
AP_RangeFinder: average over 100Hz frames in USD1 CAN driver
...
this reduces noise
2021-10-26 15:31:12 +11:00
Andrew Tridgell
c56bd323ee
AP_CANManager: fixed CAN protocol docs to include USD1
2021-10-26 15:31:12 +11:00
Peter Barker
76859c8386
Tools: add option to configure-all to write all hw configs out
2021-10-26 15:28:19 +11:00
Andy Piper
32482a29db
AP_Common: define build directory for tests
2021-10-26 11:42:12 +11:00
Andy Piper
ad55a570ee
AP_Common: define build directory for tests
2021-10-26 11:42:12 +11:00
Andy Piper
6672577f6e
waf: make sure APM_BUILD_DIRECTORY is defined for APM_BUILD_COPTER_OR_HELI and lua
2021-10-26 11:42:12 +11:00
Andy Piper
97b57519bf
AP_OSD: convert APM_BUILD_COPTER_OR_HELI() to APM_BUILD_COPTER_OR_HELI
2021-10-26 11:42:12 +11:00
Andy Piper
6a00819b2d
AP_InertialSensor: convert APM_BUILD_COPTER_OR_HELI() to APM_BUILD_COPTER_OR_HELI
2021-10-26 11:42:12 +11:00