Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
31,797 Commits 70 Branches 507 Tags 660 MiB
Commit Graph

31797 Commits

Author SHA1 Message Date
Alexander Malishev 03d88b01be HAL_ChibiOS: added support for interrupt based rcin parsing 2018-04-24 08:03:46 +10:00
Andrew Tridgell 6e0b5c204a AP_Notify: support buzzer backend on ChibiOS 2018-04-24 08:03:46 +10:00
Andrew Tridgell ca9d1a55fe AP_InertialSensor: support ICM-20689 IMU 
like the 20789, but without the baro
 2018-04-24 08:03:46 +10:00
Jacob Walser 68da3a123c Sub: add armed check to preflight baro calibration 
This check was lost in 05ee33d!
 2018-04-23 15:12:35 -04:00
Jacob Walser 0223cf70ed Sub: better check and text message for baro calibration failure 2018-04-23 15:12:35 -04:00
Jacob Walser 7caca6a251 Sub: reduce default ACRO_YAW_P by 25% to 3.375 2018-04-23 15:12:35 -04:00
Jacob Walser 4fae5cdfcf Sub: disarm motors if failsafe action fails 2018-04-23 15:12:35 -04:00
Jacob Walser 4fe8746a2a Sub: remove arbitrary scalars from manual mode inputs 
fix bluerobotics/ardusub#150
 2018-04-23 15:12:35 -04:00
murata 3577def8fd AC_Avoid: use elseif because value does not change 2018-04-23 19:45:50 +09:00
murata 29b1a6ed41 AC_Avoid: fix comment 2018-04-23 19:45:37 +09:00
Randy Mackay 7f7a588002 Tools: add accel and turn-rate max and increase steering angle P 
these parameters were added to Rover-3.3
 2018-04-23 11:06:34 +09:00
malcolm churn 7718196838 HAL_ChibiOS: Fix sparky2 target. 
Correct pin mappings, ADC, PWM.

Not working
Flash memory, Logging, external i2c tested with NXP MAG3110.
 2018-04-22 21:01:14 +10:00
Randy Mackay 2fff9561a7 Copter: 3.6.0-rc1 release notes 2018-04-21 09:22:42 +09:00
Andrew Tridgell e2fa38968f AP_BoardConfig: fixed build for some boards 
for boards that don't have board detection but do have a safety switch
this fixes the build
 2018-04-21 08:45:34 +10:00
Pierre Kancir 3be6c0e26b ArduCopter : clean unused definitions 2018-04-20 15:26:47 +01:00
Jacob Walser c76ff32aa1 Sub: Do not report altitude in GLOBAL_POSITION_INT if there is no depth 
sensor connected

Fix bluerobotics/ardusub#145
 2018-04-19 14:58:06 -04:00
Patrick José Pereira 0878f5044c Sub: Send a clear message if depth sensor is not connected 
Fix bluerobotics/ardusub#151

Signed-off-by: Patrick José Pereira <patrickelectric@gmail.com>
 2018-04-19 07:45:00 -07:00
Randy Mackay 8fa1700d02 Rover: 3.3.0-rc1 release notes 2018-04-19 17:20:38 +09:00
Randy Mackay 87eef9051f Rover: increase default pivot turn angle to 60deg 
pivoting at only 30degrees of error could lead to endless twitching back and forth for poorly tuned rovers
 2018-04-19 16:32:48 +09:00
Randy Mackay 23ed735304 AR_AttitudeControl: reduce default steering I gain to 0.2 
Also reduce default filter from 50hz to 10hz
 2018-04-19 16:29:12 +09:00
Randy Mackay e5c0b1814a GCS_MAVLink: remove underscore from method names 2018-04-19 13:38:22 +09:00
Vince Kurtz 2f81747112 GCS_MAVLink: fix VISP logging 
log VISP messages for the ATT_POS_MOCAP mavlink message as well
 2018-04-19 13:34:49 +09:00
Peter Barker 9480572075 AP_Notify: ChibiOS: beep on mode change 2018-04-19 09:29:41 +10:00
Peter Barker 557f8cee43 AP_HAL_ChibiOS: add mode-change-beeps 2018-04-19 09:29:41 +10:00
mirkix 79f3fd532b AP_HAL_ChibiOS: fix spi clock calculation 2018-04-19 08:32:31 +10:00
Peter Barker 5b03835103 Tools: autotest: correct pattern match in get_parameter 2018-04-18 20:31:55 +09:00
Peter Barker 802e4c6315 Tools: autotest: add tests for relays 2018-04-18 20:31:55 +09:00
Peter Barker e7b5978d8d SITL: use a 16-bit mask for GPIO out 2018-04-18 20:31:55 +09:00
Peter Barker 1eecf07e68 AP_HAL_SITL: use a 16-bit mask for GPIO out 
This allows Relay pins to be represented (typically pin 13)
 2018-04-18 20:31:55 +09:00
Peter Barker c7327acef7 Sub: use AP_ServoRelayEvents singleton 2018-04-18 20:31:55 +09:00
Peter Barker 5cc98a9733 Plane: use AP_ServoRelayEvents singleton 2018-04-18 20:31:55 +09:00
Peter Barker 4b5953734d Copter: use AP_ServoRelayEvents singleton 2018-04-18 20:31:55 +09:00
Peter Barker 80f0016951 Tracker: use AP_ServoRelayEvents singleton 2018-04-18 20:31:55 +09:00
Peter Barker d66cb1dda0 Rover: use AP_ServoRelayEvents singleton 2018-04-18 20:31:55 +09:00
Peter Barker 682679c68d GCS_MAVLink: use AP_ServoRelayEvents singleton 2018-04-18 20:31:55 +09:00
Peter Barker 544ac03ca6 AP_ServoRelayEvents: add singleton 2018-04-18 20:31:55 +09:00
ChristopherOlson 9aa685a6d8 AP_Motors:TradHeli - single rotor only - add support for H3-140 swashplates. 
Also changes the old definition to H3 for swashplates with fixed control radius and adjustable servo position.
 2018-04-18 14:24:59 +09:00
ChristopherOlson f073c58f68 AP_Motors:TradHeli - add support for reverse collective swashplates 2018-04-18 14:24:59 +09:00
Peter Barker f3c9761901 Tracker: GPS now logs its own data 2018-04-18 13:50:55 +09:00
Peter Barker a10c843e6e Sub: GPS now logs its own data 2018-04-18 13:50:55 +09:00
Peter Barker 5ef417a669 Plane: GPS now logs its own data 2018-04-18 13:50:55 +09:00
Peter Barker 04885b127c Copter: GPS now logs its own data 2018-04-18 13:50:55 +09:00
Peter Barker 64a8de42da DataFlash: use singleton for getting hold of gps object 2018-04-18 13:50:55 +09:00
Peter Barker 901ba0034c AP_NavEKF3: do not pass GPS into Log_Write_GPS; it uses singleton 2018-04-18 13:50:55 +09:00
Peter Barker 578facc9ad AP_NavEKF2: do not pass GPS into Log_Write_GPS; it uses singleton 2018-04-18 13:50:55 +09:00
Peter Barker e73a02343a Rover: GPS now logs its own data 2018-04-18 13:50:55 +09:00
Peter Barker 643e7e039a AP_GPS: log received data 
Also log a set of flag values if a driver is deleted
 2018-04-18 13:50:55 +09:00
Peter Barker 8648db06b4 Copter: create autoyaw.cpp from all the bits of Copter::Mode::AutoYaw 2018-04-18 13:27:43 +09:00
Peter Barker 948b90ed97 Copter: rename roi_WP to just roi 
A Vector3f is not a waypoint.

This should really be "Point Of Interest" rather than "Region Of
Interest"
 2018-04-18 13:27:43 +09:00
Peter Barker ba8b3e2415 Copter: create an AutoYaw helper object to hold auto-yaw state 2018-04-18 13:27:43 +09:00