Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
6,353 Commits 71 Branches 509 Tags 778 MiB
Commit Graph

178 Commits

Author SHA1 Message Date
Andrew Tridgell 6d11940ada AHRS: removed Quaternion build support from APM/ACM/rover 2012-08-22 10:42:21 +10:00
rmackay9 6d489947cf ArduPlane: replaced many "int" with "int16_t", "long" with "int32_t" 2012-08-18 18:26:13 +09:00
Andrew Tridgell 5e690d5680 APM: added parameter FBWB_ELEV_REV 
this fixes issue 343
 2012-08-17 15:04:53 +10:00
Andrew Tridgell df3c8a5bc0 APM: when land_complete is true, use land_pitch 
this gives a flare on final landing
 2012-08-15 12:39:35 +10:00
Andrew Tridgell 47be6d8ad1 AP_Airspeed: remove airspeed filter and run at 10Hz 
this saves on the filter memory, and gives just as good a result
 2012-08-15 12:39:35 +10:00
Andrew Tridgell 8cb55eb75a APM: keep the time of the last heartbeat message 
this will be used for failsafe processing
 2012-08-15 12:39:34 +10:00
Andrew Tridgell 2865434d02 APM: added 'OBC' failsafe module for ArduPlane 
this adds FS_* parameters for setting up APM to follow the outback
challenge failsafe rules.

This includes:

 - manual pin
 - heartbeat pin
 - waypoint for heartbeat failure
 - waypoint for GPS failure
 2012-08-15 12:39:34 +10:00
Andrew Tridgell 93f1d5645b APM: fixed LOITER_TIME and LOITER_TURNS 
These now follow the mavlink spec. Loiter time is in seconds, and
loiter turns is now 32 bit angle, so can handle larger numbers of
turns.
 2012-08-15 12:39:34 +10:00
Andrew Tridgell d9b09d2c93 APM: allow for navigation by dead-reckoning 
we now ask AHRS if we have a position estimate, and use that if
available
 2012-08-11 12:01:08 +10:00
Amilcar Lucas d34549f386 Add an optional second mount to ArduPlane and ArduCopter 2012-08-08 23:22:24 +02:00
Andrew Tridgell dcc50b5705 AP_Airspeed: removed values passed to constructor 2012-08-08 16:38:39 +10:00
Andrew Tridgell 5bfd1200d6 APM: change variables to use _cm, _cd and _ms suffix for units 
this makes it less likely that we mix up units
 2012-08-08 12:12:30 +10:00
Andrew Tridgell a823c9ceae APM: removed cli slider and dipswitch options 
use mavlink/eeprom for all config
 2012-08-08 12:12:29 +10:00
Andrew Tridgell 12cd6b68ff AP_Param: update ArduPlane core for new AP_Param interface 2012-08-08 12:11:57 +10:00
Amilcar Lucas f14237126a Add me :) 2012-08-06 00:40:12 +02:00
Amilcar Lucas b8c7b8a786 RC_Channel: Allow each channel to know who they are, this simplifies the enabling and output function calls. 2012-08-05 23:08:31 +02:00
Amilcar Lucas 4ba847c449 The mount type must be updated periodically 2012-08-04 18:44:08 +02:00
Andrew Tridgell 301ab00c5b APM: added control switch debouncer 
this adds a switch debouncer, similar to the one used in
ArduCopter. I'm adding this after a flight on the weekend where noise
on the control mode channel caused a mode change away from auto.

To prevent this change adding excessive mode switch latency, it also
moves the reading of the control switch to the 10Hz loop, away from
the 3.3Hz loop. That gives us 0.2s delay in mode switch changes and
allows for spikes in the control mode for 0.1 seconds without changing
mode.
 2012-08-01 13:59:37 +10:00
rmackay9 06e35820e5 ArduPlane: allow MPU6000's DMP to be used for attitude estimation. 
Enable by adding this line to APM_Config.h:
#define DMP_ENABLED ENABLED
 2012-07-28 19:50:40 +09:00
Andrew Tridgell 9eb05a2e1a APM: update version for 2.50 release 2012-07-26 11:36:17 +10:00
Andrew Tridgell 7e697e4abd APM: switch back to old nav_roll calculation 
the old nav_roll will be used for the 2.50 release to prevent the need
for re-tuning. For the release after that we will use the new
calculation
 2012-07-26 10:03:36 +10:00
Michael Oborne 39ad8b5eec AP fix sitl hil attitude mode. 2012-07-24 07:18:25 +08:00
Jeff Taylor d02655ac56 APM: Fixed bug where landing_pitch wasnt initialized properly 
this adds a new LAND_PITCH_CD parameter to control the landing pitch
when an airspeed sensor is not being used
 2012-07-19 13:59:30 +10:00
Andrew Tridgell d6e370886f APM: rename airspeed_cruise to airspeed_cruise_cm to make the units clearer 
it is in cm/s, not m/s
 2012-07-19 11:50:41 +10:00
Amilcar Lucas 610fdeacc1 Support up to 11 servos in APM2 
Conflicts:

	ArduPlane/ArduPlane.pde
 2012-07-18 22:01:19 +02:00
Andrew Tridgell de3c9ce56d Airspeed: change APM to use new AP_Airspeed library 
the next step is AHRS dead reckoning
 2012-07-16 11:21:50 +10:00
Andrew Tridgell c80a88766f APM: added credit for FBW altitude limit code 
thanks Yuri!
 2012-07-10 08:36:50 +10:00
Andrew Tridgell f6d7d1bc59 APM: changed PID library to do automatic deltat calculation 
this fixes a problem with the HDNG2RLL PID, which was using the wrong
time base and prevents similar bugs from happening in the future
 2012-07-06 19:59:18 +10:00
Andrew Tridgell 58fd91165f APM: fixed some build warnings and type errors 2012-07-06 19:59:18 +10:00
Andrew Tridgell 6ee9f1ae97 APM: use new location functions 2012-07-04 12:42:46 +10:00
Andrew Tridgell 99b11e4f19 Mount: enable mount control via eeprom parameters 
this enables MNT_* parameter control of the camera mount code. It also
fixes the conversion of calculated angles between degrees and
integers, and fixes stabilised mount control when yaw control is not
available.
 2012-07-03 10:21:01 +10:00
Andrew Tridgell 55092c25a6 SITL: enable the SIM_* parameters in ArduCopter and ArduPlane 2012-06-29 15:10:52 +10:00
Andrew Tridgell 3a2594fa1a APM: ArduPlane updates for new compass interface 2012-06-27 16:01:50 +10:00
Andrew Tridgell 6639294c72 APM: update for new barometer interface 
the barometer can now calibrate and return altitude values.

A 0.3 low pass filter is used on altitude to match the previous code
 2012-06-27 16:01:50 +10:00
Andrew Tridgell 4a50686c3e APM: prepare for 2.40 release 2012-06-16 10:11:26 +10:00
Amilcar Lucas 1906e06b69 Added camera trigger functionality 2012-06-13 21:00:20 +02:00
Amilcar Lucas a32b7c200b Add "3 axis camera stabilization" and "point camera to 3D point" functionality 
Patch by Gregory Fletcher and reviewed by me
 2012-06-13 20:55:19 +02:00
Amilcar Lucas 5ffd489d87 Spellcheck 2012-06-13 20:44:35 +02:00
Jason Short c804860243 Cosmetic changes only. 2012-06-10 13:10:07 -07:00
Andrew Tridgell 99b39aef93 APM: ready for 2.40-beta 2012-06-08 18:03:21 +10:00
Andrew Tridgell 25c17a5425 re-enable the AP_Mount build 2012-06-04 19:32:11 +10:00
Andrew Tridgell 3af29bd84e AP_Mount: disable AP_Mount until it works with MAVLINK10 2012-06-04 13:14:51 +10:00
Andrew Tridgell b3aa704c49 AirSpeed: added parameter ARSPD_USE 
setting ARSPD_ENABLE to 1 and ARSPD_USE to 0 allows the airspeed
sensor to be initialised and logged without it being used for flight
control. This is very useful when initially testing an airspeed sensor
in a new plane. It also makes it possible to enable/disable the use of
the airspeed sensor during a flight at any time.
 2012-05-22 20:02:23 +10:00
Andrew Tridgell 3ae1c6f9e0 APM: prepare for 2.34 2012-05-14 14:29:59 +10:00
Andrew Tridgell f43f5900bc Telemetry: make it possible to use UART2 on APM2 
building with TELEMETRY_UART2=ENABLED allows you to use the solder
bridge on the APM2 to enable telemetry on UART2. This allows both USB
telemetry and a radio at the same time.
 2012-05-04 10:39:44 +10:00
Andrew Tridgell b6a475f6a5 MAVLink: make APM build with MAVLink 1.0 possible with arduino GUI 2012-04-24 22:24:58 +10:00
Andrew Tridgell 85ba978a65 ready for 2.33 release 2012-04-09 18:16:49 +10:00
Andrew Tridgell 7b50724f60 MAVLink: allow for find grained stream rate control 
streams can now be requested at any multiple of 20ms. So if you ask
for a stream at 7Hz then you will get it at close to 7Hz.
 2012-04-02 11:18:53 +10:00
Andrew Tridgell 86cc7a5e1d APM: enable AP_Declination by default 2012-03-30 14:25:27 +11:00
Andrew Tridgell 9d193f06c9 APM: Change version to 2.32 2012-03-29 12:50:12 +11:00
Andrew Tridgell 1c934dc7ef APM: increase ArduPlane version to 2.31 2012-03-27 16:13:29 +11:00
Andrew Tridgell 989304fb47 APM: enable the new offset nulling in APM 2012-03-27 15:37:24 +11:00
Andrew Tridgell 8afd196907 APM: adapt ArduPlane for AHRS framework 2012-03-19 17:29:02 +11:00
Michael Oborne 3944c1e665 update AP version to 2.30 2012-03-18 10:27:49 +08:00
Andrew Tridgell 2a03a0584f AP_Declination: disable library when AUTOMATIC_DECLINATION is not ENABLED 
unfortunately this library was causing avrdude to fail to load the hex
to my APM2. Until we work out why, it's disabled.
 2012-03-11 21:46:41 +11:00
Adam M Rivera d3667faef4 AP_Declination: Added call to compass.set_initial_location if the compass is enabled when the 3D fix is obtained. 
Signed-off-by: Andrew Tridgell <tridge@samba.org>
 2012-03-11 20:59:47 +11:00
Andrew Tridgell 371677610d APM: avoid fetching the DCM matrix twice 
also no special case for quaternions
 2012-03-10 10:34:32 +11:00
Andrew Tridgell e39c3cb9d2 APM: make it possible to build ArduPlane with quaternion support 2012-03-10 10:34:29 +11:00
rmackay9 02cf07bb6b ArduPlane - updated to use new filter library 2012-02-28 21:03:04 +09:00
rmackay9 e1114bf7f7 ArduPlane - added Filter.h to unbreak the build! 2012-02-26 17:05:56 +09:00
rmackay9 21d7a77009 ArduPlane - switch sonar to use new mode filter from filter library 2012-02-26 15:35:42 +09:00
Andrew Tridgell 0248b48d30 allow MAG_ENABLE to be changed in flight 
this disables the compass in DCM if MAG_ENABLE is changed in
flight. Without this we would use a fixed yaw once the compass is
disabled

This also makes sure we don't pass the compass to DCM till we have
done a read. This ensures we have a good compass fix for the initial
DCM heading
 2012-02-25 14:51:09 +11:00
Andrew Tridgell 330ff5dc8b APM: added some comments related to hold_course 
hold_course is either -1 (for disabled) or a course to hold for
takeoff/landing. This makes the code a bit clearer.

It also resets hold_course in all non-auto modes, to ensure it isn't
used
 2012-02-15 08:50:45 +11:00
Andrew Tridgell bc0ed62aa9 adapt mainline APM code to AP_Param 2012-02-13 16:22:51 +11:00
Michael Oborne 9ca6668c1b fix SITL attitude hil 2012-01-20 16:04:49 +08:00
analoguedevices 418f5ea31e Increment version number in anticipation of a firmware hex push. 2012-01-16 22:48:46 +00:00
Doug Weibel 797e0e27a9 Additional commenting on global variables 
First pass done.
 2012-01-16 10:28:03 -07:00
Doug Weibel b4e58b50ee Additional commenting on global variables 2012-01-16 09:45:42 -07:00
Doug Weibel 0306bf97a0 Just a little more commenting work on global variables 2012-01-15 16:11:02 -07:00
Doug Weibel 69c7598db2 Update battery monitoring code for ArduPlane 
Fixes compatibility for APM2.  Also a significant update to the battery monitoring code:  We previously had monitoring modes for individual cell voltages for 3 and 4 cell lipos.  These have been removed as they were never really supported (the cell voltages were computed but were not reported or recorded anywhere).  Also, some clean-up/prep work was done for supporting monitoring 2 separate battery packs.  The CLI battery and current monitoring tests were consolidated into 1 test.
 2012-01-15 16:10:28 -07:00
Doug Weibel 892f24ac5c Adding comments for global variables 2012-01-11 12:37:43 -07:00
Doug Weibel 4de2155845 Tweak to FBW min altitude 
Patch from Yury
 2011-12-31 15:44:40 -07:00
Andrew Tridgell cd3729d993 APM: added error checking on barometer read 
if the barometer is dead and the GPS has a fix, use the GPS for
altitude
 2011-12-28 20:41:53 +11:00
Andrew Tridgell 98353b7ba8 APM: added error checking on compass read 2011-12-28 20:41:53 +11:00
Andrew Tridgell 3cb96fb8af APM: convert to new I2C library 2011-12-28 20:41:53 +11:00
analoguedevices b8917b58bd Added contributor names, removed "alpha" from firmware name 2011-12-26 17:13:37 +00:00
Andrew Tridgell e687ce9b3d mainloop_count should be uint16_t 2011-12-21 23:31:38 +11:00
Andrew Tridgell 89561d49d0 always declare a timer_scheduler 
we should always run this code
 2011-12-21 23:31:38 +11:00
Andrew Tridgell df094ce463 fixed airspeed sensor for ArduPlane on APM2 
we were trying to use a non-existant ADC chip!
 2011-12-17 07:29:09 +11:00
Andrew Tridgell f6f808357c removed AperiodicProcess code 
this code was never being used, and was more complex than it was
worth.
 2011-12-17 07:29:09 +11:00
Andrew Tridgell fc495ce6a7 geofence: added fence status reporting and faster altitude check 2011-12-16 20:11:51 +11:00
Andrew Tridgell 3b148c87d5 geofence: main geo-fence code 
this implements the primary logic of geo-fencing
 2011-12-16 20:11:51 +11:00
Andrew Tridgell 960d6ee38a removed an unused variable 2011-12-16 20:09:49 +11:00
Andrew Tridgell 888d6226b2 fixed two more CONFIG_HARDWARE #ifdef bugs 2011-12-13 17:05:48 +11:00
Andrew Tridgell 78e8fbff9c fixed hardware config check for barometer 2011-12-12 15:14:55 +11:00
Andrew Tridgell 011110e1dd airspeed: use floating point values and better averaging in zero_airspeed() 
this makes the calibration of airspeed a bit more accurate, and
prevents truncation of airspeed values
 2011-12-12 15:14:55 +11:00
Pat Hickey a99a1dbc9a ArduPlane: update AP_Baro construtors and initializers 2011-12-11 15:21:10 -08:00
Pat Hickey 04ea979331 ArduPlane: Rename APM_BMP085 classes to AP_Baro_BMP085 classes 2011-12-11 15:21:09 -08:00
Doug Weibel 2ef4c79a7c Minimum ground speed patch from Claudio Natoli. Thanks Claudio! 
This patch will boost the target airspeed as necessary to keep the ground speed above a parameter value - param_min_groundspeed.  Airspeed is still limited to FBW-max.  Setting min_groundspeed to zero (default) disables the feature.
 2011-12-09 16:43:25 -07:00
Pat Hickey ab56a764d3 ArduPlane: rev version number from 2.26 to 2.27 Alpha 2011-11-25 20:00:19 -08:00
Andrew Tridgell 86927ac0a5 ArduPlane: rename purple to APM2 2011-11-25 20:00:19 -08:00
Andrew Tridgell 7def0e98e8 USB-MUX: auto-switch telemetry port based on UXB mux for ArduPlane 
when USB is unplugged, switch baud rate to the SERIAL3_BAUD rate from
EEPROM
 2011-11-25 20:00:19 -08:00
Andrew Tridgell ffba37d599 desktop: first version of register level SITL support 
this adds register level emulation of the ADS7844 and the RC
input/output hardware on the APM1, allowing for SITL testing without
enabling HIL in the code
 2011-11-25 20:00:18 -08:00
Andrew Tridgell 1c20efe4b8 re-organiser sensor declarations 
this tries to make the #ifdef nesting easier to understand
 2011-11-25 20:00:17 -08:00
Andrew Tridgell 03c7d7bfb6 purple: always declare timer_scheduler 2011-11-25 20:00:17 -08:00
Pat Hickey 9e47536924 purple: declare sensors for purple library rework 
we need some different declarations to match the new APIs
 2011-11-25 20:00:17 -08:00
analoguedevices b3716d988f Rev version number 2011-11-19 23:43:47 +00:00
Doug Weibel f752c4b799 Change to logging file system. 
This commit is somewhat temporary as I have come up with a better scheme and will be modifying this.  Just making this commit in case I need to roll back
 2011-11-17 21:25:51 -07:00
analoguedevices 7535b8a3d5 Rev version number 2011-11-16 05:04:36 +00:00
analoguedevices e3ef9a2a36 Rev version number to 2.25 2011-11-14 05:31:27 +00:00