Commit Graph

577 Commits

Author SHA1 Message Date
Peter Barker 0414929310 autotest: fix Heli spline waypoint test
Mission isn't round-tripped so make it non-strict
2021-03-13 09:35:22 +11:00
bugobliterator 5074b6d336 autotest: add test case for GPS ordering
also fix flake8 issues
2021-03-12 16:32:36 +09:00
bugobliterator 48277b43e4 Tools: add autotest for checking GPS ordering 2021-03-12 16:32:36 +09:00
Randy Mackay 78ddd0512c Tools: autotest for copter spelling fix 2021-03-09 11:49:42 +11:00
Peter Barker 425ab1358a autotest: tidy streamrate handling
Stop setting MAVProxy stream rates; these are neither here-nor-there now as MAVProxy will only modify its own connection's streamrates now

Stop doing the set-streamrate dance to work around MAVProxy's
set_streamrate algorithms.

Remove useless and misleading set of streamrate in Plane test; we reset
streamrates on the reboot immediately following this set.  Considering
the streamrate was never eset this was a good thing.
2021-03-05 21:34:58 +11:00
James O'Shannessy 269fa5cbe2 AutoTest: Copter remove FENCE_AUTOENABLE tests
Addresses comments made in review, removes the FENCE_AUTOENABLE param for copter.
No param means no tests required.
2021-03-05 14:52:46 +11:00
James O'Shannessy e16bbe6e18 AutoTest: Ensure fence state is disabled at end of test
This appears to be another case of the fence state carrying over from one test to another. Disabling the fence at the end of the test appears to have fixed this problem
2021-03-05 14:52:46 +11:00
James O'Shannessy 31462418c6 AutoTest: Ensure Copter can RTL and Land even when Fence Floor has not been auto disabled 2021-03-05 14:52:46 +11:00
James O'Shannessy 6251b6eead AutoTest: Rebase and carry across changes from autotest 2021-03-05 14:52:46 +11:00
James O'Shannessy b2346ef6df AutoTest: Adds additional tests to ArduCopter to test autoenable and floor
Adds tests for:
* Testing auto-enable disabled (when no autoenabling of the fence is required)
* Test auto-enabled always after takeoff (when takeoff complete condition met)
* Test auto-enabled disable floor only (when land sequence begins)
* Test auto- on arm/disarm (when vehicle is armed/disarmed)
* Tests ability to land when fence is breached
2021-03-05 14:52:46 +11:00
Dr.-Ing. Amilcar do Carmo Lucas dd5ede0fe0 autotest: small comment improvements 2021-03-05 14:52:46 +11:00
James O'Shannessy bbd606b8b5 AutoTest: Corrections to autotests 2021-03-05 14:52:46 +11:00
James O'Shannessy 47e76a1807 AutoTest: Move fence enable/disable to common location 2021-03-05 14:52:46 +11:00
Dr.-Ing. Amilcar do Carmo Lucas 528defd560 Autotest: activate the fence via a mavlink command
This should not be required in the future, please fix this and revert this commit
2021-03-05 14:52:46 +11:00
Dr.-Ing. Amilcar do Carmo Lucas 8d8753b14c Autotest: fix two copter tests after parameter rename
I'm not sure if a better fix would be to remove the set_parameter() call
2021-03-05 14:52:46 +11:00
James O'Shannessy 215901be30 Autotest: Correct the logic for fence based autotest functions
Adds corrections to enabling fence using aux function.
Correctly test fences statically. Only uploaded fences can be checked using a fence file, so we check those first. Then we add steps to check tin can, max and minm all set the fence as present, as expected.
Plane will support MAV_PROTOCOL_CAPABILITY_MISSION_FENCE, so we assert that it does support it.
To test ceiling and floor, leverage some existing functions for takeoff, change altitude and land. Check for respective breach.
Add a floor breach check to copter.
2021-03-05 14:52:46 +11:00
Randy Mackay a35a7e1523 Tools: autotest manual control test requires 12 deg
adjusted down because of lower default angle_max
2021-03-03 08:03:39 +09:00
Peter Barker cc83562add autotest: tidy fence handling 2021-03-02 16:54:06 +11:00
Peter Barker fc9a93ba67 autotest: stop using mavproxy for clearing missions 2021-03-02 14:24:36 +11:00
Peter Barker 97e2596bf8 autotest: stop clearing mission at start of test
These are implicitly cleared by the framework
2021-03-02 14:24:36 +11:00
Peter Barker 973510a4ff autotest: push context after customising cmdline
doing things in the other order causes problems when running the
complete suite
2021-03-02 14:24:36 +11:00
Peter Barker 10007e2e42 autotest: load missions natively rather than using MAVProxy 2021-03-02 14:24:36 +11:00
Peter Barker 34a52e9cfe autotest: use wait_statustext in place of mavproxy.expect for autorotate test 2021-03-02 13:34:09 +11:00
Peter Barker d3b3c443bc autotest: reset copter completely after autotune test 2021-02-25 10:49:58 +11:00
Peter Barker 013415eb31 autotest: make and mark arducopter.py as flake8-compliant 2021-02-24 15:10:10 +11:00
Peter Barker 79f21ed639 autotest: add test for GSF logging 2021-02-23 12:36:33 +11:00
Peter Barker 44ec74030e autotest: recover from flip in althold to remove stabilise throttle problem 2021-02-21 23:11:26 +11:00
Peter Barker a4a5d52c35 autotest: extend time allowed for RTL for simplemode test 2021-02-21 22:45:06 +11:00
Peter Barker 9120882e9e autotest: print name of open dataflash log when test exception caught
The stack trace is already extremely useful... but mapping back to the
relevant dataflash log is a bit of a pain.

Adding more stuff to this method in the future might be good, too.
2021-02-21 21:35:35 +11:00
Peter Barker b5f490aff4 autotest: make fly_proximity_avoidance_test_alt_no_avoid more reliable 2021-02-21 17:44:10 +11:00
Peter Barker d4aef2dba8 autotest: stop using MAVProxy to change mode 2021-02-20 00:03:24 +11:00
Peter Barker c13d229877 autotest: use self.set_current_waypoint rather than "wp set" to set current wp 2021-02-19 12:25:40 +11:00
Peter Barker dcc04ccd09 autotest: stop using MAVProxy to change modes 2021-02-18 17:38:52 +11:00
Peter Barker b1ccf3b3f8 autotest: add test for rangefinder-based proximity avoidance enablement 2021-02-18 15:05:51 +11:00
Peter Barker a292fe1b8b autotest: use wait_statustext rather than mavproxy.expect
This is important when running under Valgrind as the text can be
significantly delayed.  wait_statustext times out in simulation time,
whereas mavproxy.expect has a flat 60s timeout
2021-02-17 18:16:04 +11:00
Peter Barker dbdda65956 autotest: add basic test for GPS blending 2021-02-17 11:30:01 +11:00
Peter Barker c2e310d75f autotest: add test for OBSTACLE_DISTANCE_3D message 2021-02-04 15:50:45 +11:00
Peter Barker 393ec5d6f7 autotest: add test for MAVProxy proximity sensor 2021-02-04 12:03:35 +11:00
Peter Barker ad2ab333f9 Tools: autotest: allow autotest to connect directly to SITL 2021-01-24 09:25:45 +11:00
Peter Barker 30836535d0 autotest: retry dynamic notch test up to 3 times 2021-01-22 11:17:42 +11:00
Peter Barker 281296832a autotest: retry GyroFFTHarmonic test on failure 2021-01-21 16:45:34 +11:00
Andrew Tridgell 3e640eed80 autotest: changes for per-IMU biases and scaling 2021-01-21 13:09:21 +11:00
Peter Barker c7a6047904 autotest: add option to retry tests / create and use Test definition object 2021-01-21 10:23:17 +11:00
Andrew Tridgell c396d15890 Revert "autotest: ensure defaults files don't set already-default-values"
This reverts commit 3d431cd4f1.

It breaks MissionPlanner SITL. We can re-apply once MissionPlanner
copes with external_model.
2021-01-20 08:54:43 +11:00
Peter Barker 1cb86303b4 Tools: add test for maxbotixi2cxl 2021-01-19 11:20:47 +11:00
Peter Barker 3d431cd4f1 autotest: ensure defaults files don't set already-default-values
autotest: mark some vehicles as having external physics models

autotest: add default_params_filename to some vehicle info
2021-01-19 10:34:00 +11:00
Peter Barker 8f9d3909f1 autotest: model_defaults_filepath always returns a list 2021-01-19 10:34:00 +11:00
Peter Barker 2c0e3751a9 autotest: reboot after moving from EKF type 10 to EKF type 2
Bad things happen with home set but origin not
2021-01-18 20:48:11 +11:00
Peter Barker 662e86780b autotest: reduce motor vibration for landing 2021-01-18 20:14:08 +11:00
Peter Barker 2d62fb99b1 autotest: force-disarm copter before reboot in GCS failsafe tests 2021-01-18 14:17:32 +11:00